INSTRUCTION
MANUAL
BALL-JOINT
DAY AND NIGHT COLOR CAMERA
MODEL HDC100
Copyright © 2007 Clover Electronics U.S.A. All Rights Reserved.
Note:
▪ Apply the provided AC adapter only.
▪ The total length of cable must not exceed 200’ including extension
cable.
TROUBLE SHOOTING
If the camera does not function properly, check the following points before contacting the
service center.
Troubles
Remedies
No video
Check the AC adapter and video cable
between the camera and a monitor
Check the brightness control on the
monitor
Check if the lens is stained. If dirty,
clean it with soft and clean cloth
The image on the screen is dark
The image on the screen is dim
The camera is not working properly, and Check if you have connected the
the surface of the camera case is hot
The contrast on the screen is too weak
provided AC adapter
Adjust the contrast feature of the
monitor. If the camera is exposed under
too strong light, change the position
Does the camera face to directly to the
sunlight or fluorescent light? Change the
camera position
The image on the screen flickers
Picture rolls and jumps, scrambled
picture
Improper V-hold control. Setting on your
monitor
Picture smaller than screen
House current may be too low
SPECIFICATIONS
• Image sensor
• Scanning system
• Horizontal resolution
• Shutter speed
• Sync. System
• S/N ratio
• Minimum illumination
• Video output
• AGC
1/3” Sony Super HAD CCD, 768H x 494V
525 lines, 2:1 interlace
520 TV lines
Auto, Manual (1/60 to 1/100,000 sec)
Internal
more than 46db (AGC off)
0.1 Lux with LEDs- Off
Composite 1.0Vp-p @75 Ω
Auto
• White balance
• Lens
• Current consumption
• Power supply
• Operating temperature
• Dimensions
Auto
6mm fixed lens
450mA Max
DC 15V, 1.5A
-10°C to 50°C
140 (W) x 111 (H) x 140 (D) mm
2.8 Lbs
• Weight
LIMITED 2 YEAR WARRANTY
This warranty gives the original purchaser specific legal rights and you may also have
other rights, which vary from state to state. If our products do not function because of any
defect in material or workmanship, we will repair free of charges for 2 years on parts and
labor from the date of original purchase. This warranty does not cover modification,
abuse, incidental or consequential damages unless the state of owner’s residence specially
prohibits limitations on incidental or consequential damages.
HOW TO OBTAIN FACTORY SERVICE
1. Original purchaser must fill out a warranty card and mail it to the factory with model
number, serial number and the date of purchase.
2. We will repair or replace, and return to the owner the system under this limited
warranty.
3. Please pack the system carefully and securely using the original packing materials,
and send it prepaid and insured to: 13073 E. 166th St, Cerritos, CA 90703.
4. Please include a check for $25.00 to cover the cost of return postage and handling. If
the system is returned within the warranty period, please include a proof of purchase.
If the system is out of warranty, you will receive an estimate of the repair cost for
your approval before repair work will be begun.
AVAILABLE ACCESSORIES
CDR4010
CDR4170
CDR1610
CDR0850
CA100H
Stand-alone 4 CH Digital Video Recorder (DVR).
Stand-alone 4 CH Digital Video Recorder (DVR).
Stand-alone 16 CH Digital Video Recorder (DVR).
Stand-alone 8 CH Digital Video Recorder (DVR).
100’ 6pin Din Extension cable.
PACKAGE INCLUDES
1-Ball-Joint Day & Night Color Camera
1-100’ 6pin Din Cable
1-UL Approved AC Adapter
1-BNC to RCA Adapter
1-Hardware Accessories Kit
1-Instruction Manual
1-Warranty Registration Card
|