®
AWorld Without Wires
UNIDEN
CORDLESS
PHONES
TRU9385
TRU9385
Series
Series
OWNER’S MANUAL
Using Your Phone......................................................27 Using Special Features.............................................36
Making.a.Call.from.a.Caller.ID.Record................... 29 Setting Up the Answering System...........................39
Reviewing.Messages.............................................. 44
2
3
Welcome
Thank.you.for.purchasing.a.Uniden.Multi-Handset.phone.
Note:. Illustrations.in.this.manual.are.used.for.explanation.purposes..Some.illustrations.in.this.manual.may.differ.
from.the.actual.unit.
As.an.Energy.Star®.Partner,.Uniden.has.determined.that.this.product.or.product.models.meets.
the.Energy.Star® guidelines for energy efficiency. Energy Star®.is.a.U.S..registered.mark.
Uniden.is.a.registered.trademark.of.Uniden.America.Corporation.
Accessibility
Uniden.provides.a.customer.service.hotline.for.accessibility.questions..If.you.have.a.disability.and.need.customer.
service.assistance.or.if.you.have.any.questions.about.how.Uniden’s.products.can.accommodate.persons.with.
disabilities,.please.call.the.accessibility.voice/TTY.line:.ꢀ-800-874-93ꢀ4
Our.customer.care.hours.as.well.as.accessibility.information.can.be.found.on.our.website,.www.uniden.com,.under.
the.“Accessibility”.link..If.your.call.is.received.outside.of.our.business.hours,.you.can.leave.us.a.message.and.we.will.
call.you.back.
4
Terminology Used in this Manual
Standby
CID
The.handset.is.not.in.use..If.it.is.off.the.cradle,.no.line.has.been.activated..No.dial.tone.is.present..
Caller.ID.is.available.from.your.Telephone.provider.and.is.offered.to.users.on.a.subscription.basis.
With.this.service,.you.will.be.able.to.see.the.incoming.caller.information.such.as.name.and.phone.number..
CID/CW or
CIDCW
Caller.ID.with.Call.Waiting.is.available.by.subscription.from.your.Telephone.provider.
With.this.service,.you.will.be.able.to.view.incoming.caller.information.while.on.a.call.with.another.user.
Base
The.main.part.of.the.phone.that.connects.to.your.phone.line.and.lets.you.make.and.receive.calls.
A.cradle.that.comes.with.an.accessory.handset.and.charges.the.handset.battery.
It.connects.to.power.but.does.not.connect.to.a.phone.line.
Charger
Accessory
Handsets
Additional.handsets.that.can.register.to.the.main.base,.allowing.you.to.add.stations.without.connecting.another.
phone.line..This.base.supports.a.total.of.ten.cordless.handsets;.see.page.ꢀ9.for.Compatible.Handsets.
This.term.relates.to.feature.settings.that.will.apply.to.all.registered.handsets.and.the.base.unit.
These.features.are.available.by.selecting."Global.Setup".in.the.handset.menu..Only.one.handset.or.the.base.
can.change.global.settings.at.a.time,.and.you.have.to.make.sure.the.phone.is.not.currently.being.used.
Global
Settings
Station
Talk
Any.handset.or.the.base.
A.telephone.line.has.been.activated.on.the.handset.or.base,.enabling.a.dial.tone..
Manual Conventions
This.manual.uses.several.different.type.styles.to.help.you.distinguish.between.different.parts.of.the.phone:
• lower case bold.text.with.“[ ]”.indicates.a.key.or.button.on.the.phone
• ALL CAPITALS indicates text on the display, such as menu options, prompts, and confirmation messages
• lower case bold.text.indicates.a.status.light.on.the.phone
• ALL CAPITALS BOLD.indicates.a.connection.jack.on.the.base.or.charger
5
Product Overview
Features:
• 5.8GHz.FHSS.Expandable.System
• Expands.up.to.ꢀ0.Handsets
• Integrated.Digital.Answering.System
• Caller.ID/Call.Waiting
• ꢀ0.Speed.Dial.Numbers.on.Base
• Speakerphone.on.Base.&.Handset
• 7.Ringer.Options.on.Handset.(3.Tones/4.Melodies)
• Last.5.Number.Redial.on.Handset;
Last.Number.Redial.on.Base
• Base.Keypad
• Bilingual.Menu.Displays..
(for.US.models:.English.and.Spanish,.
for.Canadian.models:.English.and.French)
.
.
.
• Store.30.Caller.ID.Numbers
• Advanced.Phonebook.Features.on.Handset:
• Store.70.Phonebook.Entries
• Alphabetical.Search
• Call.Transfer
• Conferencing
• Intercom
• Personalized.Ring.by.Party
• Transfer.Single.Listing.or.Entire.Phonebook
Answering System Features:
• Digital.Tapeless.Recording
• Day.and.Time.Announcement
• Remote.Message.Retrieval
• Toll.Saver
• Up.to.ꢀ4.Minutes.of.Recording.Time
• Call.Screening
• Personal.or.Pre-recorded.Outgoing.Messages
• Message.Alert
• Bilingual.Voice.Prompts..
(for.US.models:.English.and.Spanish,.
.
.
.
• Records.Up.to.59.messages
for.Canadian.models:.English.and.French)
6
Parts of the Phone
The.following.illustrations.show.you.all.of.the.different.parts.of.your.phone.
Handset
ꢀ. Headset.Jack.Cover.
2. Belt.Clip.Hole
3. Speakerphone.Speaker.and.Ringer
4. Handset.Battery.Compartment
5. new message.LED
6. Handset.Earpiece
5
6
1
7. LCD.Display
2
3
8. [menu/clear].key
7
9.
[
].key.(up)
14
15
16
17
18
ꢀ0. [ /flash] key (talk/flash)
8
9
ꢀꢀ. [ ].key.(phonebook/left)
ꢀ2. [ /tone].key
10
11
*
ꢀ3. [hold/int’com/xfer].key.(hold/intercom/transfer)
ꢀ4. [redial/pause].key
ꢀ5. [select/ ].key.(select/messages)
ꢀ6. [ ].key.(caller.ID/right)
ꢀ7. [ ].key.(end.call)
4
12
13
19
20
21
ꢀ8. [ ].key.(down)
ꢀ9. [#].key
20. [ ].key.(speaker)
22
2ꢀ. Handset.Microphone
22. Handset.Charging.Contacts
7
Base
23
24 25
26 27
28
32 33 34 35
36
37
38
39 40
41 42
29
30
31
43
44
45
23. Base.speaker
32. [hold/int'com].key.
.
.
39. [greeting].key.(record/greeting)
40. [memory].key
(hold/intercom)
24. charge.LED.
33. [
34. [on/off].key. .
(answering.system.on/off)
].key.(repeat)
25. message counter.LED
26. in use.LED
4ꢀ. [redial/pause].key
42. [mute].key
.
27. [flash].key
43. Base.microphone
44. TEL LINE.jack
35. [
36. [
].key.(play/stop)
28. [ ].key.(speaker)
29. Base.charging.contacts
].key.(skip)
45. DC IN 9V.jack
37. [volume +/-].key
30. [ /tone].key
*
38. [ ].key.(delete)
3ꢀ. [#].key
8
Using the Interface
Reading the Display
The.handset.display.uses.icons.to.tell.you.the.status.of.your.phone..The.table.below.lists.the.icons.and.what.they.
mean.
Icon
Status
Description
Standby/Talk The.battery.icon.indicates.the.handset.battery.status:.full,.medium,.low,.and.empty.
Standby
Talk
The.ringer off.icon.indicates.that.the.ringer.is.turned.off.
:OFF
The.mute.icon.appears.while.the.handset.microphone.is.muted.
Talk
Talk
Talk
The.boost.icon.appears.when.the.Clarity.Boost.feature.is.activated.
The.speaker.icon.appears.when.the.handset.speaker.phone.is.in.use.
The.privacy.icon.appears.when.the.Privacy.Mode.is.turned.on.
The Standby Screen
When.the.phone.is.in.standby,.the.handset.display.shows.the.following.items:
Ringer.off.icon.(when.the.ringer.is.off)./.battery.icon
Handset.ID
:
OFF
Handset #1
New CID: 5
Number.of.new.Caller.ID.calls.received
9
Using the Four-way Function Key
Your.handset.has.a.four-way.function.key.that.allows.you.to.
move.the.cursor.or.pointer.on.the.display.and.access.the.most.
commonly.used.features.at.the.touch.of.a.button..By.moving.
this.key.to.the.left,.you.open.the.phonebook..Move.the.key.to.
the.right.to.access.Caller.ID.information..To.use.this.four-way.
key,.place.your.thumb.over.the.key.on.the.handset.and.move.to.
the.four.positions.to.get.the.feel.of.how.it.moves.and.operates.
Up
View the
phonebook
View the
Caller ID
Four-way
Function Key
Down
Using the Handset Menus
To.open.the.menu,.press.[menu/clear]..Highlight.the.option.you.want.by.pressing.the.four-way.function.key..This.will.
move.the.cursor;.the.option.currently.highlighted.has.a.triangle.beside.it..Activate.the.highlighted.option.by.pressing.
[select/ ]..To.exit.the.menu.and.return.to.standby,.press.[ ].
If.you.do.not.press.a.key.within.thirty.seconds,.the.phone.will.time.out.and.exit.the.menu..When.setting.the.day.and.
time,.the.time-out.period.is.extended.to.two.minutes.
Note:. For.ANSW..SETUP.and.GLOBAL.SETUP.menu.options,.make.sure.the.line.is.not.in.use.and.the.handsets.
are.within.range.of.the.base.
ꢀ0
Entering Text from Your Handset
You.can.use.the.number.keypad.on.your.handset.to.enter.text.by.referring.to.the.letters.printed.on.each.number.
key. When you press the number key in a text entry field, the phone displays the first letter printed on the number
key..Press.the.number.key.twice.to.display.the.second.letter.and.three.times.to.display.the.third..Capital.letters.are.
displayed first, then lower case letters, then the number on the key.
If two letters in a row use the same number key, enter the first letter, then use [right] or [left] on.the.four-way.
function.key.to.move.the.cursor.to.the.next.position.to.enter.the.second.letter..For.example,.to.enter.the.word.
“Movies”:.
ꢀ) Press.[6].once.to.enter.M.
2) Use.[right].on.the.four-way.function.
key.to.move.the.cursor.to.the.right.
3) Press.[6].six.times.to.enter.o.
4) Press.[8].six.times.to.enter.v.
5) Press.[4].six.times.to.enter.i.
6) Press [3] five times to enter e.
7) Press.[7].eight.times.to.enter.s.
8) Press.[select/ ].to.end.your.text.
entry.
If.you.make.a.mistake.while.entering.a.name,.use.[right] or.[left] on.the.four-way.function.key.to.move.the.cursor.to.
the.incorrect.character..Press.[menu/clear].to.erase.the.wrong.character,.and.then.enter.the.correct.character..
To.delete.all.characters,.press.and.hold..[menu/clear].
Download from Www.Somanuals.coꢀmꢀ. All Manuals Search And Download.
Installing the Phone
Choosing the Best Location
When.choosing.a.location.for.your.new.phone,.here.are.some.important.guidelines.you.should.consider:
• The.location.should.be.close.to.both.a.phone.jack.and.a.continuous.power.outlet.(one.which.is.not.connected.to.a.
switch)..
• For.optimum.range.and.reception,.place.the.base.in.an.open.area,.as.high.as.possible..
• If.your.home.has.wired.alarm.equipment.connected.to.a.phone.line,.be.sure.that.installing.the.system.does.
not.disable.your.alarm.equipment..If.you.have.questions.about.what.will.disable.alarm.equipment,.contact.your.
telephone company or a qualified installer.
Avoid noise sources such as a window
by a street with heavy traffic
Avoid heat sources, such as radiators,
air ducts, and sunlight
Avoid sources of electrical noise such as motors,
microwave ovens, and fluorescent lighting
Avoid television sets and other
electronic equipment
Avoid excessive moisture, extremely low
temperatures, dust, mechanical vibration,
or shock
Choose a central location
Avoid personal computers
Avoid other cordless telephones
Note:. For.maximum.range:.
• Keep.both.the.base.and.handset.antennas.free.of.obstruction.
• When.the.handset.is.not.in.use,.place.the.handset.in.an.upright.position.
• Metal.and.reinforced.concrete.may.affect.cordless.telephone.performance.
ꢀ2
Installing the Battery
Use.only.the.Uniden.BT-ꢀ004.rechargeable.battery.pack.supplied.with.your.cordless.telephone.
Follow.the.steps.below.to.install.the.handset.battery.
ꢀ) Press in on the handset battery case cover (use the finger
indention.for.a.better.grip).and.slide.the.cover.downward.to.
remove.
2) Plug.the.battery.cable.into.the.battery.jack..Be.sure.to.match.the.
red.and.black.wires.to.the.label.near.the.jack..The.cable.should.
snap.into.place..Gently.pull.on.the.battery.cable..If.the.battery.
connector.comes.loose,.try.connecting.again.until.the.battery.
snaps.into.place.
3) Place.the.battery.case.cover.back.on.the.handset.and.slide.it.
upwards.until.it.clicks.into.place..
ꢀ3
Installing the Belt Clip
Line.up.the.holes.on.each.side.of.the.handset..To.attach.the.belt.clip,.insert.into.
the.holes.on.each.side.of.the.handset..Press.down.until.it.clicks.
To remove the belt clip,.pull.either.side.of.the.belt.clip.to.release.the.tabs.from.
the.holes.
Connecting the Base and Charging the Handset
ꢀ) Connect.the.AC.adapter.(AD-800).to.the.DC IN 9V.jack.
2) Connect.the.AC.adapter.to.a.standard.ꢀ20V.AC.wall.outlet..
DO.NOT.use.an.AC.outlet.controlled.by.a.wall.switch..
3) Place.the.handset.in.the.base.with.the.LCD.screen.facing.
forward.
Route the cord.
4) Make.sure.that.the.charge.LED.illuminates..If.the.LED.
does.not.illuminate,.check.to.see.that.the.AC.adapter.is.
plugged.in.and.the.handset.makes.good.contact.with.the.
charging.contacts.
To AC outlet
5) Charge.your.handset.at.least.ꢀ5.to.20.hours.before.
To DC IN 9V
plugging.into.the.phone.line.
AC adapter (supplied)
Caution: To avoid risk of fire and shock, only
use the Uniden AD-800 AC adapter.
ꢀ4
Connecting to the Phone Line
Once.the.battery.pack.is.fully.charged,.connect.the.telephone.
cord.to.the.TEL LINE.jack.and.to.a.telephone.wall.jack..
TEL Cord
Testing the Connection
Try.making.a.call..If.your.call.does.not.connect.or.you.cannot.
get.a.dial.tone,.try.the.following.steps:
ꢀ) Make.sure.the.AC.adapter.cord.is.securely.connected.to.
the.DC IN 9V.jack.and.a.standard.power.outlet.
To TEL LINE
2) Check.to.make.sure.the.battery.is.fully.charged..(If.you.
don’t.see.the.“battery.full”.icon,.check.to.make.sure.the.
battery.is.properly.connected).
To telephone wall jack
3) Change.the.dial.mode.
Telephone cord (supplied)
Changing the Dial Mode
Your.phone.can.communicate.with.the.telephone.network.in.two.different.ways:.tone.dialing.or.pulse.dialing.
These.days,.most.phone.networks.use.a.method.called.tone.dialing,.so.your.phone.comes.programmed.for.tone.
dialing..If.your.phone.company.uses.pulse.dialing,.you.will.need.to.change.your.phone’s.dial.mode..If.you.don’t.get
a.dial.tone.or.can’t.connect.to.the.telephone.network,.please.follow.the.steps.below.to.modify.your.phone’s.settings:
ꢀ) Press.[menu/clear]..Select.the.GLOBAL.SETUP.menu,.and.then.the.
Dial Mode
DIAL.MODE.submenu.
Tone
2) Scroll.[ ].to.highlight.PULSE.
Pulse
3) Press.[select/ ]. You will hear a confirmation tone.
If.you.ever.need.to.change.the.dial.mode.back.to.tone.dialing,.follow.the.same.procedure,.but.select.TONE.in.step.2.
ꢀ5
Wall Mounting the Base
This.phone.can.be.mounted.on.any.standard.wall.plate.
ꢀ) Snap.the.wall.mount.adapter.into.the.notches.on.the.base.top.
2) Plug.the.AC.adapter.into.the.DC IN 9V.jack.
3) Wrap.the.AC.adapter.cord.inside.the.molded.wiring.channel.as.
shown.
4) Plug.the.AC.adapter.into.a.standard.ꢀ20V.AC.wall.outlet.
5) Plug.the.telephone.cord.into.the.TEL LINE.jack.
6) Plug.the.telephone.cord.into.the.telephone.wall.jack.
7) Align.the.mounting.slots.on.the.base.with.the.mounting.posts.on.
the wall. Then push in and down until the phone is firmly seated.
Notes:
Wall plate
• DO.NOT.use.an.AC.outlet.controlled.by.a.wall.switch.
• To.mount.the.phone.directly.on.the.wall,.insert.two.#ꢀ0.screws.
(minimum.length.of.ꢀ.3/8.inches,.not.supplied).into.the.wall,.3.ꢀ5/ꢀ6.
inches.apart;.leave.the.screw.heads.ꢀ/8.inch.away.from.the.wall.to.
allow.room.for.mounting.the.phone..Be.sure.the.wall.is.capable.
of.supporting.the.weight.of.the.phone,.and.use.the.proper.type.of.
anchoring.device.for.the.wall.material.
AC adapter (supplied)
AC outlet
ꢀ6
Basic Setup
Selecting the Language
Your.phone.supports.two.languages:.English.and.Spanish.for.US.models.
or.English.and.French.for.Canadian.models..Once.you.select.a.language,.
the.menus.on.the.phone.will.display.in.that.language..The.default.
language.is.English.
Handset Language
English
Espaﾂol
for US models
ꢀ) Press.[menu/clear]..Select.the.HANDSET.SETUP.menu,.and.then.
the.HANDSET.LANGUAGE.submenu.
2) Move.the.cursor.to.choose.a.language.
Handset Language
English
for.US.models:.Choose.ENGLISH.or.ESPAÑOL.(Spanish).
for.Canadian.models:.Choose.ENGLISH.or.FRANÇAIS.(French).
Franﾕais
3) Press.[select/ ]. You will hear a confirmation tone.
for Canadian models
Activating Personal Ring
You.can.assign.special.ringer.tones.to.anyone.in.your.phonebook..When.your.phone.gets.a.call,.it.looks.up.the.
Caller.ID.information.in.your.phonebook..If.you’ve.assigned.a.personal.ringer.to.that.number,.the.phone.uses.it.so.
you.know.who.is.calling..To.turn.on.personal.ringing,.follow.these.steps:
ꢀ) Press.[menu/clear]..Select.the.HANDSET.SETUP.menu,.and.then.
Personal Ring
the.PERSONAL.RING.submenu.
On
2) Move.the.cursor.to.select.ON.or.OFF.
Off
3) Press.[select/ ]. You will hear a confirmation tone.
ꢀ7
Activating the Key Touch Tone
Key.Touch.Tone.is.the.tone.your.keypad.makes.when.keys.are.pressed..You.can.turn.this.tone.on.or.off.
ꢀ) Press.[menu/clear]..Select.the.HANDSET.SETUP.menu,.and.then.
the.KEY.TOUCH.TONE.submenu.
Key Touch Tone
On
2) Move.the.cursor.to.select.ON.or.OFF.
3) Press.[select/ ]. You will hear a confirmation tone.
Off
ꢀ8
Adding Accessory Handsets
Your.phone.supports.a.total.of.ten.cordless.handsets..You.can.now.place.a.fully-featured.cordless.handset.anywhere.
AC.power.is.available.to.connect.the.handset.charger..All.the.handsets.ring.when.a.call.is.received.
Compatible Handsets
Your.phone.is.compatible.with.the.TCX930..If.you.purchased.an.accessory.handset.separately,.you.must.register.the.
handset.to.the.base.before.use..Accessory.handsets.will.not.operate.until.they.are.registered.
Charging Accessory Handsets
The.handset’s.battery.recharges.automatically.when.the.handset.is.placed.in.the.charger..
ꢀ) Use.the.supplied.AC.adapter.(AD-0005).to.connect.the.
Route the cord.
DC IN 9V.jack.to.a.standard.ꢀ20V.AC.outlet.
2) Set.the.charger.on.a.desk.or.tabletop,.and.place.the.
handset.in.the.charger.with.the.LCD.screen.facing.
forward.
3) Make.sure.that.the.charge.LED.illuminates..If.the.LED.
does.not.illuminate,.check.to.see.that.the.AC.adapter.is.
plugged.in.and.the.handset.makes.good.contact.with.the.
To AC outlet
To DC IN 9V
charging.contacts.
4) Charge.the.handset.battery.pack.for.at.least.ꢀ5-20.hours.
before using your new handset for the first time.
AC adapter (supplied)
Caution: Use only the Uniden AD-0005 adapter.
ꢀ9
Registering TCX930 Accessory Handsets
Your.phone.supports.a.total.of.ten.(ꢀ0).cordless.handsets..Handset(s).supplied.in.the.box.with.the.phone.base.are.
pre-registered.at.the.factory..If.you.purchase.an.accessory.handset,.you.need.to.register.the.handset.before.use..
When.charged,.pre-registered.handsets.display.a.handset.ID.number..Handsets.that.have.not.been.registered.
display:
Handset not
to register.
..↔..
registered-place
handset on base
See your Owner's
Manual for help.
To.register.an.accessory.handset:
ꢀ) Charge.the.handset.for.ꢀ5-20.hours.
2) Place.the.handset.in.the.main.telephone.base.cradle.to.initiate.registration..HANDSET.REGISTERING.will.
appear.in.the.LCD..
3) Wait.approximately.thirty.seconds,."REGISTRATION.COMPLETE".will.be.displayed.to.indicate.the.handset.has.
been.registered.to.the.base.and.a.handset.ID.will.be.automatically.assigned.
If.REGISTRATION.FAILED.appears.in.the.LCD,.please.try.these.steps.again.
Note:. If.an.accessory.handset.has.ever.been.registered.to.a.base,.you.must.reset.the.handset.before.you.can.
20
Setting Up the Phonebook
Your.handset.can.store.up.to.seventy.names.and.numbers.in.your.phonebook..When.all.the.phonebook.entries.are.
full,.you.will.hear.a.beep.and.MEMORY.FULL.appears..You.cannot.store.any.additional.names.and.numbers.unless.
you.delete.some.of.the.existing.ones.
You.can.also.use.the.phonebook.entries.to.store.a.group.of.numbers.(up.to.twenty.digits).that.you.may.need.to.enter.
once.your.call.connects..This.is.referred.to.as.chain.dialing..See.Chain.Dialing.from.the.Phonebook.on.page.28.
Creating Phonebook Entries
To.store.names.and.numbers.in.your.phonebook,.please.follow.these.steps:
ꢀ) When.the.phone.is.in.standby.mode,.press.[ ].
Edit Name
2) To.create.a.new.phonebook.entry,.move.the.cursor.to.select.CREATE.NEW,.
｡
and.press.[select/ ]..EDIT.NAME.appears.
3) Enter the name for this entry (EDIT NAME)..
Use.the.keypad.to.enter.a.name.for.this.entry;.the.name.can.contain.up.to.sixteen.characters..(See.Entering.
Text.from.Your.Handset.on.page.ꢀꢀ.for.instructions.on.entering.text.).If.you.do.not.want.to.enter.a.name.for.this.
entry,.your.phone.will.store.this.entry.as.<NO.NAME>..Press.[select/ ] when you are finished.
4) Enter the number for this entry (EDIT NUMBER).
Edit Number
Once.you.have.stored.a.name,.EDIT.NUMBER.appears.next..Use.the.
number.keypad.to.enter.the.phone.number;.the.phone.number.can.contain.
8007303456｡
up.to.twenty.digits..If.you.need.the.phone.to.pause.between.digits.when.it’s.
dialing.(for.example,.to.enter.an.extension.or.an.access.code),.press.[redial/
pause].to.insert.a.two-second.pause..You.will.see.a.P.in.the.display..You.can.
also.use.more.than.one.pause.together.if.two.seconds.is.not.long.enough..
Each.pause.counts.as.one.digit..Press.[select/ ] when you are finished.
2ꢀ
5) Assign a personal ring tone for this entry (PERSONAL RING).
You.can.attach.a.special.ring.tone.to.each.phonebook.entry;.the.phone.will.
use.this.ring.tone.when.this.person.calls..Use.[ ].and.[ ]..to.select.one.of.
for.a.complete.list.of.ring.tones)..As.you.scroll.through.the.tones,.you.will.hear.
a.sample.of.each.tone..When.you.hear..the.ring.tone.you.want.to.use,.press.
[select/ ]..If.you.do.not.want.to.use.a.personal.ring.tone.for.this.phonebook.
entry,.choose.NO.SELECTION;.the.phone.will.use.your.standard.ring.tone.setting.
Personal Ring
No Selection
Flicker
6) You will hear a tone confirming that the new entry has been stored, and DONE! appears in the display.
Finding a Phonebook Entry
Press.[ ].to.open.the.phonebook,.and.then.select.DIAL/EDIT.or.press.[ ].again..Phonebook.entries.are.stored.in.
alphabetical.order..To.scroll.through.the.phonebook.from.A.to.Z,.press.[ ]..To.scroll.trough.the.phonebook.from.Z.to.
A.press.[ ].
You.can.also.use.the.letters.on.the.number.keys.to.jump.to.a.name.that.starts.with.that.letter..For.example,.to.search.
for.an.entry.beginning.with.the.letter.M,.press.[6] once. The phonebook jumps to the first entry that begins with the
letter.you.entered;.you.can.then.use.[ ].and.[ ].to.scroll.to.other.entries.
To.close.the.phonebook,.press.[ ]..During.a.call,.press.[ ].again.instead.of.[ ] to.close.the.phonebook.
Editing an Existing Phonebook Entry
ꢀ) With.the.phone.in.standby,.press.[ ].to.open.the.phonebook.
2) Select.DIAL/EDIT.or.press.[ ].again.
3) Find.the.entry.you.want.to.edit.and.press.[select/ ].
4) Follow.the.steps.for.Creating.Phonebook.Entries.on.page.2ꢀ..If.you.do.not.wish.to.change.the.information.at.any.
step,.simply.press.[select/ ].to.go.to.the.next.step.
22
Storing Caller ID or Redial Numbers in the Phonebook
You.can.store.Caller.ID.records.or.redial.numbers.in.the.phonebook.so.you.can.use.them.later..Go.to.the.Caller.ID.or.
redial.list.and.select.the.number.you.want.to.store..(If.the.Caller.ID.information.did.not.include.the.number,.then.you.
will.not.be.able.to.store.it.)
ꢀ) When.the.phone.is.in.standby,.press.[ ].to.open.the.Caller.ID.list.or.[redial/pause].to.open.the.redial.list.
2) Use.[ ].and.[ ] .to.scroll.through.the.Caller.ID.records.or.redial.numbers..When.you.come.to.the.information.
you.want.to.store,.press.[select/ ]..EDIT.NAME.appears.
If the phone number is already stored in memory, you will hear a beep, and THIS DATA IS ALREADY SAVED!
appears.in.the.display..The.number.will.not.be.stored.
Deleting Phonebook Entries
You.can.delete.a.single.phonebook.entry.at.a.time.or.all.phonebook.entries.at.once:
To.delete.a.single.phonebook.entry:
ꢀ) When.phone.is.in.standby,.press.[ ].
2) Use.[ ].and.[ ].to.select.DIAL/EDIT.and.press.[select/ ].or.[ ].again.
3) Find.the.entry.that.you.want.to.delete.and.press.[menu/clear]..
4) DELETE.ENTRY?.appears.in.the.display..Move.the.cursor.to.select.YES.
5) Press.[select/ ]. You will hear a confirmation tone, and DELETED! appears in the display.
To.delete.all.phonebook.entries:
ꢀ) When.the.phone.is.in.standby,.press.[ ].
Phonebook : 50
2) Move.the.cursor.to.select.DELETE.ALL,.and.press.[select/ ].
Copy
3) DELETE.ALL?.appears.in.the.display..Move.the.cursor.to.select.YES.
Delete All
4) Press.[select/ ]. You will hear a confirmation tone, and DELETED!
appears.in.the.display..
23
Copying Phonebook Entries to Another Handset
If.you.have.more.than.one.handset,.you.can.transfer.phonebook.entries.from.one.handset.to.another.without.having.
to.re-enter.names.and.numbers..You.can.transfer.one.phonebook.entry.at.a.time.or.all.phonebook.entries.at.once.
ꢀ) When.the.phone.is.in.standby,.press.[ ]..
2) Move.the.cursor.to.select.COPY,.and.then.press.[select/ ].
3) Move.the.cursor.to.select.the.handset.which.you.want.to.transfer.the.entries.to.and.then.press.[select/ ].
4) Move.the.cursor.to.select.ONE.MEMORY.or.ALL.MEMORY,.and.then.press.[select/ ].
5) If.you.select.ALL.MEMORY,.ARE.YOU.SURE?.appears.on.the.display.
screen..Move.the.cursor.to.select.YES,.and.then.press.[select/ ].
Copy Phonebook
6) If you select ONE MEMORY, find the phonebook entry you want to transfer
One Memory
and.then.press.[select/ ].
All Memory: 50
7) The.phonebook.entries.will.be.transferred.to.the.designated.handset..During.
the.copy.process,.the.receiving.handset.shows.RECEIVING.and.the.Handset.
ID.of.the.sending.handset.
8) When the transfer is completed, DONE! appears on the handset.
Note:. If.your.phonebook.contains.seventy.entries,.you.cannot.store.any.new.phonebook.entries..You.will.hear.a.
beep,.and.NOT.ENOUGH.MEMORY.IN.RECEIVING.UNIT.appears.on.the.display..If.the.selected.handset.is.
out.of.range.or.data.transfer.is.cancelled,.UNAVAILABLE.appears.in.the.display..Phonebook.listings.will.not.
be.transferred.
24
Programming Base Speed Dial Numbers
The.base.allows.you.to.store.up.to.ten.frequently-dialed.numbers.for.speed.dialing.through.the.base.speakerphone..
Each.speed.dial.number.may.contain.up.to.twenty.digits.(including.pauses)..The.base.speed.dial.numbers.are.
separate.from.the.handset.phonebook.entries.and.must.be.programmed.individually.
To.program.numbers.into.the.base.speed.dial.memory:
ꢀ) With.the.phone.in.standby,.press.[memory].on.the.base.
2) Use.the.base.number.keypad.to.enter.the.phone.number.that.you.would.like.to.
store.(up.to.twenty.digits)...If.you.need.the.phone.to.pause.during.dialing,.press.
[redial/pause].to.insert.a.two-second.pause..You.can.insert.multiple.pauses.to.
increase.the.time;.each.pause.counts.as.one.digit.
3) Press.[memory].again,.and.then.press.the.number.key.[0].to.[9].you.want.to.
use when dialing this phone number. You will hear a confirmation tone.
Note:. If.there.is.already.a.speed.dial.number.saved.to.that.number.key,.the.phone.
number.will.be.overwritten.
To.delete.stored.numbers.from.the.base.speed.dial.memory:
ꢀ) With.the.phone.in.standby,.press.[memory].on.the.base.twice.
2) Press.the.number.key.[0].to.[9].that.contains.the.speed.dial..number.you.want.to.delete..You.will.hear.a.
confirmation tone.
25
Customizing Your Phone
Selecting a Ring Tone (Handset only)
You.may.choose.from.four.melodies.or.three.tones.for.your.
phone’s.primary.ring.tone..Each.handset.can.use.a.different.
ring.tone.or.melody..The.available.ring.tones.are.as.listed:
Fur.Elise.(ELISE)
Flicker
Clatter
Wake.Up
We.Wish.You.A.Merry
Christmas.(MERRY-XMAS)
Aura.Lee.(AURA.LEE)
Star.Spangled.Banner
(STAR.SPNGL)
Tones
Melodies
ꢀ) Press.[menu/clear]..Select.the.HANDSET.SETUP.menu,.and.then.the.................................................
Ringer Tones
Flicker
Clatter
RINGER.TONES.submenu.
2) Move.the.cursor.to.select.a.ring.tone..As.each.ring.tone.is.highlighted,.you.will.
hear.a.sample.
3) When.you.hear.the.tone.you.want.to.use,.press.[select/ ]..You.will.hear.a.
confirmation tone.
Activating AutoTalk (Handset only)
AutoTalk.allows.you.to.answer.the.phone.simply.by.picking.up.the.handset.from.the.cradle..You.do.not.have.to.press.
a.button.to.answer.the.call.
ꢀ) Press.[menu/clear]..Select.the.HANDSET.SETUP.menu,.and.then.the.
AutoTalk
AUTOTALK.submenu.
On
2) Move.the.cursor.to.select.ON.or.OFF.
Off
3) Press.[select/ ]. You will hear a confirmation tone.
Activating Any Key Answer (Handset only)
Any.Key.Answer.allows.you.to.answer.the.phone.by.pressing.any.key.on.the.dial.pad..
ꢀ) Press.[menu/clear]..Select.the.HANDSET.SETUP.menu,.and.then.the.ANY.KEY.
Any Key Answer
ANSWER.submenu.
On
2) Move.the.cursor.to.select.ON.or.OFF.
Off
3) Press.[select/ ]. You will hear a confirmation tone.
26
Using Your Phone
From a handset
speaker phone
From the base
speaker phone
From a cordless handset
ꢀ) Pick.up.the.handset.from.the.
ꢀ) Pick.up.the.handset.from.
cradle.
the.cradle.
2) Press.[ /flash].
2) Press.[ ].
3) Listen.for.the.dial.tone.
4) Dial.the.number.
3) Listen.for.the.dial.tone.
4) Dial.the.number.
ꢀ) Press.[ ].
Making
a call
2) Listen.for.the.dial.tone.
OR
OR
3) Dial.the.number.
ꢀ) Pick.up.the.handset.from.the.
ꢀ) Pick.up.the.handset.from.
cradle.
the.cradle.
2) Dial.the.number.
2) Dial.the.number..
3) Press.[ /flash].
3) Press.[ ].
ꢀ) Pick.up.the.handset..(If.
AutoTalk.is.on,.the.phone.will.
answer.when.you.pick.up.the.
handset.from.the.cradle.)
ꢀ) Pick.up.the.handset.
Answering
a call
Press.[ ].
2) Press.[ ].
2) Press.[ /flash]..(If.Any.Key.
Answer.is.on,.you.can.also.
press.any.key.on.the.dial.pad.)
Press.[ ].or.return.the.handset.to. Press.[ ].or.return.the.
Hanging up
Press.[ ].
the.cradle.
handset.to.the.cradle.
27
Making a Call from the Phonebook
ꢀ) When.the.phone.is.in.standby,.press.[ ].to.open.the.phonebook.
2) Move.the.cursor.to.select.DIAL/EDIT,.and.then.press.[select/ ].or.[ ].again.
4) Press.[ /flash].or.[ ].to.dial.the.number.
Note:. You.can.also.press.[ /flash].or.[ ].before.you.open.the.phonebook..When.you.come.to.the.phone.number.
you.want.to.dial,.press.[select/ ].
Chain Dialing from the Phonebook
You.can.use.the.phonebook.entries.to.store.a.group.of.numbers.(up.to.twenty.digits).that.you.may.need.to.enter.
once.your.call.connects.
ꢀ) Dial.the.number.normally.
2) After.the.call.connects,.press.[ ].
3) Use.[ ].or.[ ].to.select.the.phonebook.entry.that.contains.the.digits.you.want.to.send.
4) Press.[select/ ].
Switching to the Handset Speakerphone During a Call
To.switch.a.normal.call.to.the.speakerphone,.press.[ ].on.the.handset..To.switch.from.a.speakerphone.call.to.a.
normal.call,.press.[ ].
Making a Call with Base Speed Dial
ꢀ) When.the.phone.is.in.standby,.press.[ ].
2) Press.[memory].
3) Press.the.number.key.([0].through.[9]).where.the.desired.phone.number.is.stored..The.phone.dials.the.
programmed.number.
28
Using Caller ID, Call Waiting, and Redial Lists
If.you.subscribe.to.Caller.ID.service.from.your.phone.company,.your.phone.will.show.you.the.caller’s.phone.number.
and.name.(if.available).whenever.a.call.comes.in..If.you.subscribe.to.Caller.ID.on.Call.Waiting,.the.phone.will.also.
show.you.the.name.and.the.number.of.any.call.that.comes.in.while.you’re.on.the.line.
If your telephone provider supports seven-digit dialing, you can save your local area code so it does
Using the Caller ID List
You.can.store.up.to.thirty.Caller.ID.numbers.in.each.handset..Caller.ID.records.are.
stored.from.newest.to.oldest..Once.your.Caller.ID.list.is.full,.the.oldest.record.will.be.
automatically.deleted.when.a.new.call.is.received.
To.open.the.Caller.ID.list,.press.[ ].(on.the.right.side.of.the.four-way.key).
<Caller ID>
New : 1
Total:30
The.phone.will.show.the.number.of.new.Caller.ID.records.and.the.total.number.of.
stored.records..Use.[ ].and.[ ] .to.scroll.through.the.list,.or.enter.a.letter.on.the.
12/21 12:00PM
keypad to jump to the first Caller ID name that starts with that letter.
Jane Smith
214-555-1234
Making a Call from a Caller ID Record
ꢀ) When.the.phone.is.in.standby,.press.[ ].to.open.the.Caller.ID.list.
2) Use.[ ].and.[ ] to find the Caller ID record you want to dial.
3) To.add.(or.delete).a.“ꢀ”.to.the.beginning.of.the.displayed.phone.number,.press.[ /tone]..
*
4) Press.[ /flash].or.[ ].to.dial.the.number.
Note:. You.can.also.press.[ /flash].or.[ ].before.you.open.the.caller.ID.list..When.you.come.to.the.phone.number.
you.want.to.dial,.press.[select/ ].
29
Deleting Caller ID Numbers
To delete only one Caller ID number, go to the Caller ID list and find the number you want to delete. Press [menu/
clear]. When the phone asks you to confirm, select YES.
To.delete.all.the.Caller.ID.numbers,.go.to.the.Caller.ID.list.and.press.[menu/clear]..Select.YES.when.asked.if.you.
want.to.DELETE.ALL.
Note:.When.you.delete.a.Caller.ID.number,.you.delete.it.permanently.
Using Call Waiting
If.you.have.Call.Waiting.service.and.a.second.call.comes.in.when.you.are.on.the.phone,.a.call.waiting.tone.will.
sound..Press.[ /flash].on.the.handset.or.[flash].on.the.base.to.accept.the.waiting.call..There.is.a.short.pause,.and.
then.you.will.hear.the.new.caller..To.return.to.the.original.caller,.press.[ /flash] on.the.handset.or.[flash].on.the.base.
Note:.You.must.subscribe.to.Call.Waiting.service.for.this.feature.to.operate..Not.all.features.are.available.in.all.areas.
Redialing a Number
You can quickly redial the last five numbers dialed on each handset or the last number dialed on the base.
From the handset:
ꢀ) With.the.phone.in.standby,.press.the.[redial/pause].to.open.the.redial.list.
2) Use.[ ].and.[ ].or.[redial/pause].to.scroll.through.the.redial.list.
3) When you find the number you want to dial, press [ /flash].or.[ ].on.the.handset.to.dial.the.number..
Notes: • If the number exceeds 32 digits, only the first 32 digits are retained in redial memory.
.
•. If.the.redial.memory.is.empty,.EMPTY.appears.in.the.display.and.you.will.hear.a.beep.
.
.
•. You.can.also.redial.the.last.number.dialed.on.the.handset.by.pressing.[ /flash].or.[ ],.and.then
. [redial/pause].
30
From the base:
ꢀ) Press.[ ].
2) Then.press.[redial/pause].
Note: If the number exceeds 32 digits, only the first 32 digits will be dialed.
Deleting a Redial Record
If.you.want.to.delete.a.phone.number.from.the.handset’s.redial.list,.follow.the.steps.below:
ꢀ) With.the.phone.in.standby,.press.[redial/pause].
2) Use.[ ].and.[ ].to.scroll.through.the.redial.list.
3) When you find the redial number you want to delete, press [menu/clear].
4) When the phone asks you to confirm, select YES. The redial number is deleted.
Finding a Handset
To.page.a.lost.handset,.press.[hold/int’com]..Press.[1].through.[9],.[0].to.select.the.handset.you.want.to.page.or.
press.[ /tone].to.page.all.registered.handsets.
*
To.cancel.paging,.press.[hold/int’com].on.the.base.
3ꢀ
Adjusting the Ringer, Earpiece and Speaker Volume
Adjusting the Ringer Volume
You.can.choose.from.four.ringer.volume.settings.(off,.low,.medium,.and.high).on.the.
handset.or.the.base..With.the.phone.in.standby,.use.[ ].or.[ ].on.the.handset.or.
[volume +].or.[volume -].on.the.base.to.adjust.the.ringer.volume.
Adjusting the Earpiece Volume
You.can.choose.from.six.volume.levels.for.the.earpiece..To.adjust.the.earpiece.
volume.while.on.a.call,.press.[ ].(to.make.it.louder).or.[ ].(to.make.it.softer)..
Adjusting the Speaker Volume
Handset Speakerphone:.You.can.choose.from.six.volume.levels.for.the.handset.
speakerphone..To.adjust.the.speaker.volume.while.on.a.speakerphone.call,.press.
[
].(to.make.it.louder).or.[ ].(to.make.it.softer).
Base Speaker:.You.can.choose.from.ten.volume.levels.for.the.base.speaker..
To.adjust.the.speaker.volume.while.on.a.call,.call.screening.or.playing.messages,.
press.[volume +].(to.make.it.louder).or.[volume
-
].(to.make.it.softer).
32
Adjusting the Audio Tone
If you aren’t satisfied with the audio quality of your phone, you can adjust the Audio Tone of the earpiece while on
a.call..Your.phone.gives.you.three.audio.tone.options:.low,.natural.and.high;.the.default.setting,.Natural.Tone,.is.
recommended.for.hearing.aid.users..Audio.tone.adjustments.only.apply.to.the.earpiece,.not.the.speakerphone.
To.adjust.the.audio.tone:
ꢀ) With.the.phone.in.talk.mode,.press.[select/ ]..to.cycle.through.the.three.audio.tone.options.
2) When.the.desired.option.appears.on.the.display,.stop..
3) After.two.seconds,.the.displayed.audio.tone.is.set,.and.the.display.returns.to.normal.
Using the Clarity Boost Feature
If.you.encounter.interference.while.using.your.phone,.you.can.manually.improve.the.sound.by.setting.the.clarity.
booster.to.on..This.works.only.when.the.phone.is.in.use,.so.while.you.are.on.a.call:
ꢀ) Press.[menu/clear].
2) Move.the.cursor.to.CLARITY.BOOST,.and.then.press.[select/ ]..BOOST.ON.and.B.appear.in.the.display.
Use.the.same.procedure.to.turn.off.clarity.booster..BOOST.OFF.appears.
33
Using Hold, Conference and Transfer
Placing a Call on Hold
ꢀ) During.a.call,.press.[hold/int'com/xfer].on.the.handset,.or.[hold/int’com].on.the.base.to.place.the.caller.on.
hold..If.you.leave.a.caller.on.hold.for.more.than.ten.seconds,.the.display.screen.will.read,.Line.On.Hold.
2) To.return.to.the.party.on.hold,.press.[ /flash].or.[ ].on.a.handset.or.[ ].on.the.base..The.phone.will.return.to.
the.holding.party.
Notes: • You can only place a caller on hold for five minutes. Once five minutes has passed, that party’s line will be
disconnected.and.the.phone.will.return.to.standby.
.
•.While.a.call.is.on.hold,.Caller.ID.and.Call.Waiting.cannot.be.received.
Conferencing
If.you.have.more.than.one.handset,.up.to.four.people.can.participate.in.a.conference.call..A.four-way.conference.call.
consists.of.an.outside.line,.the.base.speaker.phone,.and.two.handsets..You.can.easily.join.a.call.already.in.progress.
ꢀ) From.the.handset,.press.[ /flash].or.[ ].to.join.the.call..From.the.base,.press.[ ].
2) To.hang.up,.return.the.handset.to.the.cradle.or.press.[ ].on.the.handset..On.the.base,.press.[ ]..The.other.
party.will.still.be.connected.to.the.call.
Transferring a Call
You.can.transfer.a.call.from.one.station.to.another.
From the handset:
ꢀ) During.a.call,.press.[hold/int’com/xfer].
2) Use.[ ].or.[ ].to.select.the.station.you.want.to.transfer.the.call.to,.then.press.[select/ ]..Select.ALL.to.page.
all.other.station..The.call.will.automatically.be.placed.on.hold,.and.a.paging.tone.sounds..To.cancel.the.transfer,.
press.[ /flash].or.[ ].
3) When.another.station.accepts.the.transferred.call,.you.will.be.disconnected..If.you.want.to.rejoin.the.call,..
press.[ /flash].again.or.[ ].
34
From the base:
ꢀ) During.a.call,.press.[hold/int’com].
2) Press.[1].through.[9],.[0].to.select.the.handset.you.want.to.talk.with.or.press.[ /tone].to.page.all.registered.
*
handsets..To.cancel.the.transfer,.press.[hold/int’com].
3) When.another.handset.accepts.the.transferred.call,.your.call.will.disconnected..If.you.want.to.rejoin.the.call.
press.[ ].
Answering a Transferred Call
When.a.station.receives.a.call.transfer,.it.sounds.a.paging.tone;.handsets.also.show.the.ID.of.the.station.that.is.
paging..To.accept.the.call.transfer:
ꢀ) To.answer.the.page.and.speak.to.the.transferring.station,.press.[ /flash].or.[hold/int’com/xfer].on.the.
handset..If.Any.Key.Answer.is.on,.you.can.also.press.any.key.on.the.dial.pad..If.AutoTalk.is.on,.the.handset.
will.automatically.answer.the.page.when.you.pick.up.the.handset.from.the.cradle..On.the.base,.press.[ ].or.
[hold/int’com].
2) To.accept.the.call.and.speak.to.the.caller,.press.[ /flash].on.the.handset.or.[ ] on.the.base.
3) When.you.accept.the.transferred.call,.the.transferring.station.will.be.disconnected.
Only the first station.to.answer.the.transfer.page.will.be.connected.to.the.call..If.the.transfer.page.is.not.picked.up.
within.one.minute,.the.operation.will.be.canceled.
35
Using Special Features
Privacy Mode (Handset only)
If.you.don’t.want.other.stations.to.interrupt.you.while.on.a.call,.turn.on.privacy.mode..As.long.as.your.handset.
is.in.privacy.mode,.other.stations.can’t.join.your.call.or.make.any.calls.of.their.own:.their.displays.will.show.
UNAVAILABLE.
ꢀ) While.on.a.call,.press.[menu/clear].
2) Move.the.cursor.to.CALL.PRIVACY,.and.then.press.[select/ ]...PRIVACY.MODE.ON.appears.in.the.display.for.
two.seconds;. .appears.and.remains.in.the.display.until.the.feature.is.turned.off.
To.turn.privacy.mode.off,.repeat.the.procedure.listed.above..PRIVACY.MODE.OFF.appears.
Using the Intercom
You.can.use.the.intercom.to.talk.to.another.station.without.using.the.phone.line..
Making an Intercom Page
From the handset:
ꢀ) With.the.phone.in.standby,.press.[hold/int’com/xfer].
2) Use.[ ].or.[ ].to.select.the.station.you.want.to.talk.with,.then.press.[select/ ]..Select.ALL.to.page.all.other.
station.
3) To.cancel.the.intercom.page,.press.[ ].
From the base:
ꢀ) With.the.phone.in.standby,.press.[hold/int’com].
2) Press.[1].through.[9],.[0].to.select.the.handset.you.want.to.talk.with.or.press.[ /tone].to.page.all.registered.
*
handsets..
3) To.cancel.the.intercom,.press.[hold/int’com].
36
Note:. Intercom.paging.will.be.cancelled.if.any.of.the.following.things.occur:
• You.receive.an.outside.call.or.an.intercom.page.while.selecting.the.other.handset.
• You.do.not.select.a.station.within.thirty.seconds.
• Your.handset.is.out.of.range.(OUT.OF.RANGE.appears.in.the.display).
• The.party.does.not.answer.the.page.within.one.minute.
• The.party.is.busy.(UNAVAILABLE.appears.in.the.display).
• The.party.is.out.of.range.(UNAVAILABLE.appears.in.the.display).
Answering an Intercom Page
When.the.intercom.page.tone.sounds,.the.display.will.show.the.ID.of.the.station.that.is.paging.
ꢀ) From.the.handset,.press.[ /flash].or.[hold/int’com/xfer]..If.Any.Key.Answer.is.on,.you.can.also.press.any.key.
on.the.dial.pad..If.AutoTalk.is.on,.the.handset.will.automatically.answer.the.page.when.you.pick.up.the.handset.
from.the.cradle.
2) From.the.base,.press.[hold/int’com].or.[ ].
3) To.hang.up.an.intercom.page.from.the.handset,.press.[ ]. To.hang.up.an.intercom.page.from.the.base,.press.
[hold/int’com].
Muting the Ringer (One call only)
While.the.phone.is.ringing,.press.[ ].on.the.handset.or.[
] on.the.base.to.mute.the.ringer.for.this.call..The.phone.
will.ring.again.on.the.next.call.
Muting the Microphone
Mute.turns.off.the.microphone.so.the.caller.can’t.hear.you..This.only.works.while.you.are.on.a.call..
From the handset:
ꢀ) Press.[menu/clear].
2) Move.the.cursor.to.select.MUTE.and.then.press.[select/ ]..MUTE.ON.and. .appear.in.the.display;. .remains.
while.muting.is.on.
3) To.cancel.muting,.repeat.the.procedure,.MUTE.OFF.appears.
37
From the base:
ꢀ) Press.[mute]..The.speaker.LED.blinks.while.muting.is.on.
2) To.cancel.muting,.press.[mute].again..The.speaker.LED.stops.blinking.
Seven-Digit Dialing
In.some.areas,.the.telephone.company.may.allow.you.to.place.a.local.call.by.dialing.only.seven.digits.(instead.of.
ten)..If.this.is.the.case.in.your.area,.you.can.program.your.local.area.code.in.your.phone..Programming.your.area.
code.will.allow.you.to.see.the.caller’s.seven-digit.phone.number.which.will.allow.you.to.easily.return.the.local.call.
without.modifying.the.number.before.dialing..If.you.get.a.call.from.outside.your.area.code,.you.will.see.all.ten.digits.
To.program.your.local.area.code:
ꢀ) Press.[menu/clear]..Select.the.GLOBAL.SETUP.menu,.and.then.the.AREA.CODE.submenu.
2) Use.the.number.keypad.([0].through.[9]).to.enter.a.three-digit.area.code..If.an.area.code.has.already.been.
stored,.it.appears.in.the.display..Press.[menu/clear].to.delete.the.stored.code,.and.then.enter.a.new.one.
3) Press.[select/ ]. You will hear a confirmation tone.
Tone Dialing Switch Over
If.your.phone.is.set.to.pulse.dialing,.you.can.temporarily.switch.to.tone.dialing.after.the.call.connects..This.feature.
is.useful.when.you.need.tone.dialing.to.use.automated.menu.systems,.such.as.telephone.bank.tellers,.telephone.
prescription refills, customer support menus, etc. Make your call normally. Once your call connects, press [ /tone].
*
on.the.handset.or.base..Any.digits.you.enter.from.then.on.will.be.sent.with.tone.dialing..When.this.particular.call.
ends,.the.phone.automatically.returns.to.pulse.dialing.
See.Changing.the.Dial.Mode.on.page.ꢀ5.for.instructions.on.setting.your.phone.for.pulse.or.tone.dialing.
Installing the Optional Headset
Your.phone.may.be.used.with.an.optional.headset..To.use.this.feature,.insert.the.headset.plug.
into.the.headset.jack..Your.phone.is.ready.for.hands-free.conversations..(Headsets.may.be.
38
Setting Up the Answering System
Your.handset.controls.all.of.the.answering.system.setup.options.except.for.the.personal.greeting.(personal.greetings.
must.be.changed.directly.at.the.base)..You.can.access.your.answering.machine.from.anywhere.in.home..Here.are.
some.hints.on.using.your.handset.to.access.your.answering.system:
• When.the.phone.is.in.standby,.press.[select/ ].on.the.handset.to.access.the.answering.system..REMOTE.
ANSWERING.MACHINE.OPERATION.appears.on.the.handset.display,.and.the.system.announces.the.number.of.
new.and.old.messages.
• You.can.enter.a.command.at.any.time.during.announcements.
• After the first announcement, you have thirty seconds to enter your first command before the system returns to
standby.
• If.you.receive.a.call,.answering.system.access.is.cancelled.
• If.another.handset.makes.a.call,.answering.system.access.is.cancelled.
• While.the.handset.is.operating.the.answering.system,.“-.-”.appears.on.the.base.
Recording a Personal Greeting
Your.answering.system.comes.with.a.pre-recorded.outgoing.message.or.greeting.that.plays.when.you.receive.a.
call:.“Hello,.no.one.is.available.to.take.your.call..Please.leave.a.message.after.the.tone.”.You.can.record.your.own.
personal.outgoing.greeting..Your.recorded.greeting.must.be.between.two.seconds.and.thirty.seconds.long.
ꢀ) On.the.base,.press.and.hold.[greeting].
2) The.system.announces,.“Record.greeting.”.Begin.recording.after.the.announcement.
The.message counter.LED.displays.“-.-”,.then.begins.to.count.down.thirty.seconds.
3) When you finish recording, press [greeting].again.or.press.[
]. You will hear a confirmation tone, and your
recorded.greeting.plays.back.for.you.
39
Selecting a Greeting
Once.you.have.recorded.a.personal.greeting,.the.phone.automatically.switches.to.your.personal.greeting..You.can.
also.switch.back.and.forth.between.the.pre-recorded.greeting.and.your.own.greeting.at.any.time.
ꢀ) With.the.phone.in.standby,.press.[greeting].on.the.base..The.system.plays.the.current.greeting.
2) To.keep.this.greeting,.do.nothing.
3) To.switch.to.the.other.greeting,.press.[greeting].while.the.system.is.playing.the.current.greeting.
4) Each.time.you.press.[greeting],.the.system.switches.between.the.pre-recorded.and.the.personal.greeting..
The.last.greeting.you.hear.is.used.as.the.current.greeting.
Deleting Your Personal Greeting
You.can.delete.your.personal.greeting.from.the.base..You.cannot.delete.the.pre-recorded.greeting.
ꢀ) With.the.phone.in.standby,.press.[greeting].on.the.base.
2) While.the.personal.greeting.is.playing,.press.[ ].
3) The.system.announces.“Greeting.has.been.deleted,”.and.switches.back.to.the.pre-recorded.greeting.
Selecting the Language
You.can.select.the.language.(for.US.models:.English.and.Spanish,.for.Canadian.models:.English.and.French).of.
your.answering.system.announcements..The.default.system.language.is.English.
ꢀ) On.the.handset,.press.[menu/clear]..Select.ANSW..SETUP,.and.then.the.ANSW.LANGUAGE.submenu.
2) Move.the.cursor.to.choose.a.language.
for.US.models:.Choose.ENGLISH.or.ESPAÑOL.(Spanish).
for.Canadian.models:.Choose.ENGLISH.or.FRANÇAIS.(French).
3) Press.[select/ ]. You will hear a confirmation tone.
40
Setting the Number of Rings
The.ring.time.setting.allows.you.to.set.the.number.of.rings.the.caller.hears.before.your.answering.system.plays.the.
outgoing.message..You.can.set.the.ring.time.to.answer.after.two,.four,.or.six.rings..If.you.enable.the.Toll.Saver.(TS).
setting,.the.answering.system.picks.up.after.two.rings.if.you.have.new.messages,.and.after.four.rings.if.there.are.
none..This.way,.if.you.make.a.long.distance.call.to.check.your.messages,.you.can.hang.up.after.the.third.ring.to.
avoid.long.distance.billing.charges.
ꢀ) On.the.handset,.press.[menu/clear]..Select.the.ANSW..SETUP.menu,.and.then.the.RING.TIME.submenu.
2) Move.the.cursor.to.select.a.ring.time.(TOLL.SAVER,.2.TIMES,.4.TIMES,.or.6.TIMES).
3) Press.[select/ ]. You will hear a confirmation tone.
Setting the Day & Time
If.you.do.not.set.the.clock.on.your.answering.system,.your.messages.may.not.have.the.correct.time.and.day.stamp..
ꢀ) On.the.handset,.press.[menu/clear].
2) Move.the.cursor.to.ANSW..SETUP.and.press.[select/ ].
3) Move.the.cursor.to.DAY.&.TIME.and.press.[select/ ].
4) Use.[ ] and.[ ].to.select.the.day.of.the.week,.and.press.[select/ ].
5) Use.the.number.keypad.([0].through.[9]).to.enter.the.hour.and.minutes.
6) Use.[ ] and.[ ].to.select.AM.or.PM,.and.press.[select/ ]. You hear a confirmation tone.
Setting the Record Time (or Announce only)
You.can.choose.how.long.callers.have.to.record.a.message..Set.the.record.time.to.“ꢀ.minute”.or.“4.minutes”.to.limit.
the.time.for.incoming.messages..If.you.set.the.record.time.to.“Announce.only,”.the.answering.system.answers.the.
call.but.prevents.callers.from.leaving.a.message.
ꢀ) On.the.handset,.press.[menu/clear]...Select.the.ANSW..SETUP.menu,.and.then.the.RECORD.TIME.submenu.
2) Move.the.cursor.to.select.record.time.(ꢀ.MINUTE,.4.MINUTES,.or.ANNOUNCE.ONLY).
3) Press.[select/ ]. You will hear a confirmation tone.
4ꢀ
While.your.answering.system.is.set.to.“Announce.only,”.the.message counter.LED.on.the.base.displays.“A.”.If.you.
are.using.the.prerecorded.greeting,.the.system.automatically.switches.to.the.following.message:.“Hello,.no.one.is.
available.to.take.your.call..Please.call.again.”.If.you.are.using.a.personal.greeting,.the.system.continues.to.use.that.
greeting.
Activating the Message Alert
The message alert feature sounds a short alert tone every fifteen seconds whenever you have a new message.
To.turn.on.the.message.alert:
ꢀ) On.the.handset,.press.[menu/clear]..Select.the.ANSW..SETUP.menu,.and.then.the.MESSAGE.ALERT.
submenu.
2) Move.the.cursor.to.select.ON.or.OFF.
3) Press.[select/ ]. You will hear a confirmation tone.
Activating Call Screening
Your.phone.allows.you.to.listen.to.callers.leaving.you.a.message..This.call.screen.feature.can.be.turned.on.or.off.
ꢀ) On.the.handset,.press.[menu/clear]..Select.the.ANSW..SETUP.menu.and.then.the.CALL.SCREEN.submenu.
2) Move.the.cursor.to.select.ON.or.OFF.
3) Press.[select/ ]. You will hear a confirmation tone.
Setting a Security Code or Personal Identification Number (PIN)
To.play.your.messages.from.a.remote.location,.you.will.need.to.enter.a.two-digit.security.code.or.Personal.
Identification Number (PIN). The default security code is 80.
ꢀ) On.the.handset,.press.[menu/clear]..Select.the.ANSW..SETUP.menu,.and.then.the.SECURITY.CODE.
submenu.
2) Use.the.number.keypad.([0].through.[9]).to.enter.a.two-digit.security.code.(0ꢀ-99).
3) Press.[select/ ]. You will hear a confirmation tone.
42
Using the Answering System
Turning Your Answering System On and Off
From the base
From the handset
ꢀ) With.the.phone.in.standby,.press.[on/off].
ꢀ) Press.[menu/clear]..Select.the.ANSW..
SETUP.menu,.and.then.the.ANSWER.
SETUP.submenu.
2) The.system.announces.“Answering.System.
is.on”.and.plays.the.current.greeting.
Turning.On
2) Move.the.cursor.to.select.ON.
3) The.message counter.LED.displays.the.
number.of.messages.stored.in.memory..
If the counter flashes, then you have new
messages.waiting.
3) Press.[select/ ]..You.will.hear.a.
confirmation tone.
ꢀ) With.the.phone.in.standby,.press.[on/off].
ꢀ) Press.[menu/clear]..Select.the.ANSW..
SETUP.menu,.and.then.the.ANSWER.
SETUP.submenu.
2) The.phone.announces.“Answering.System.
is.off.”
Turning.Off
2) Move.the.cursor.to.select.OFF.
3) The.message counter.LED.is.no.longer.
illuminated.
3) Press.[select/ ]..You.will.hear.a.
confirmation tone.
43
Reviewing Messages
The.base.message counter.LED.displays.the.number.of.messages.stored.in.memory..When.you.have.new.
messages,.the.message counter.LED.and.the.new message LED on the handset flash. The answering system
plays your new messages first. After you listen to all of your new messages, you can then play your old messages.
You.can.review.your.messages.from.the.base.or.from.the.handset:
From the base
From the handset
Press.[
]..The.system.announces.the.
Press.[select/ ]..The.system.announces.the.
number.of.new.and.old.messages,.plays.the.
Playing.
number.of.new.and.old.messages,.plays.the.
messages
message,.and.then.announces.the.time.and.day. messages,.and.then.announces.the.time.and.
it.was.received.
day.it.was.received..
Press [
current.message..Press.[
back.to.a.previous.message..
].once.to.go.to.the.beginning.of.the.
Press.[1].once.to.go.to.the.beginning.of.the.
current.message..Press.[1].repeatedly.to.go.
back.to.a.previous.message.
Repeating
a.message
].repeatedly.to.go.
Skipping
a.message message..
Press.[
].to.go.to.the.beginning.of.the.next.
Press.[3].to.go.to.the.beginning.of.the.next.
message.
Deleting
While.a.message.is.playing,.press.[ ].
While.a.message.is.playing,.press.[4].
a.message The.message.is.permanently.deleted..
The.message.is.permanently.deleted..
Not.available.
While.the.phone.is.in.standby,.press.[ ]..
Deleting.all.
When the system asks you to confirm, press [ ].
messages
again..All.messages.are.permanently.deleted.
Ending.the.
message.
review
Press.[5]..to.stop.the.message.playback.
Press.[ ].to.exit.the.system.and.return.to.
standby.
Press.[
return.to.standby..
]..to.stop.the.message.playback.and.
44
Screening Calls
If.you.activate.the.call.screening.feature,.you.can.listen.to.callers.leaving.a.message.without.answering.the.phone.
(see.Activating.Call.Screening.on.page.42)..You.can.always.hear.callers.from.the.base.speaker..To.screen.an.
incoming.call.from.the.handset:
• Press.[select/ ].when.the.system.is.answering..If.another.handset.is.screening.a.call,.you.will.hear.a.beep.and.
you.will.not.be.able.to.screen.the.call.
• To.answer.the.call,.press.[ /flash].
• To.stop.screening.the.call,.press.[ ].
Turning Off the Message Alert Tone
When.all.new.messages.are.played.back,.the.message.alert.tone.will.automatically.deactivate..The.tone.will.not.
deactivate.until.all.new.messages.are.played.back..To.quickly.turn.off.the.tone,.press.any.key.on.the.base.
45
Operating the Answering System While You Are Away from Home
You.can.access.your.answering.system.while.you.are.away.from.home.to.check,.play,.and.delete.messages,.or.turn.
your.answering.system.on.and.off.
Notes:
• The.answering.system.will.only.playback.messages.for.four.minutes.and.then.it.returns.to.the.command.waiting.
mode..To.continue.playing.your.messages,.press.[0].then.[2] again within fifteen seconds.
• If.you.enter.an.incorrect.security.code.three.times,.you.will.hear.a.beep.and.the.answering.system.will.return.to.
standby.
To.operate.from.a.remote.location,.use.any.touch-tone.telephone,.and.follow.these.steps:
ꢀ) Call.your.telephone.number.and.wait.for.the.system.to.answer..If.the.answering.system.is.off,.it.will.answer.after.
about.ten.rings.and.sounds.a.series.of.beeps.
2) During.the.greeting.or.the.beeps.(if.answering.system.is.off),.press.[0].and.enter.your.security.code/PIN.within.
3) The.answering.system.announces.the.current.time.and.the.number.of.messages.stored.in.memory..
.
You.hear.“To.play.incoming.messages,.press.zero-two..For.help,.press.one-zero”.followed.by.a.beep.
4) Enter a remote command from the chart below. You have fifteen seconds to enter the first command; after the
first command, you have two seconds to enter each command.
Remote Commands
Command
[0].then.[1] Repeat.a.message*
[0].then.[2] Play.incoming.messages [0].then.[5] Stop.operation
[0].then.[3] Skip.a.message [0].then.[6] Answering.system.on
Function
Command
Function
Command
Function
[0].then.[4] Delete.a.message
[0].then.[9] Answering.system.off
[1].then.[0] Help
*.If.you.press.[0].then.[1] in the first four seconds of a message, the system skips to the previous message..
If.you.press.[0].then.[1] after the first four seconds of a message, the system repeats the current message.
5) When you finish, you will hear intermittent beeps indicating that the system is in the command waiting mode.
Enter another command from the chart within fifteen seconds.
6) Hang.up.to.exit.the.system..The.answering.system.automatically.returns.to.its.normal.standby.setting.
46
Maintenance
Specifications
Operating.Temperature
32°.F.to.ꢀ22°.F.(0°.C.to.50°.C)
Base:.AD-800
Charger:.AD-0005
AC.Adapter.Part.Number
AC.Adapter.Input.Voltage
AC.Adapter.Output.Voltage
Base:.ꢀ20V.AC,.60.Hz
Charger:.ꢀ20V.AC,.60.Hz
Base:.9V.DC.@.350mA
Charger:.9V.DC.@.2ꢀ0mA
Battery.Part.Number
Battery.Capacity
BT-ꢀ004
3.6V.DC.@.500mAh
Notes:
• Use.only.the.supplied.AC.adapters.
• Be.sure.to.use.the.proper.adapter.for.the.base.and.any.chargers.
• Do not place the power cord where it creates a trip hazard or where it could become chafed and create a fire
or.electrical.hazard.
• Do.not.place.the.base.in.direct.sunlight.or.subject.it.to.high.temperatures.
Battery Replacement and Handling
With.average.use,.your.phone’s.battery.should.last.approximately.one.year..To.order.replacement.batteries,.
Caution:
• Use.only.battery.pack.BT-ꢀ004..
• Do.not.remove.the.batteries.from.the.handset.to.charge.them..
• Never throw the battery into a fire, disassemble, or heat them.
• Do.not.remove.or.damage.the.battery.casing..
47
Cleaning the Battery Contacts
To.maintain.a.good.charge,.clean.the.charging.contacts.on.the.handset.
once.a.month..Dampen.a.cloth.with.plain.water..Gently.rub.the.damp.cloth.
over.the.charging.contacts.until.all.visible.dirt.is.removed..Dry.the.contacts.
thoroughly.before.returning.the.handset.to.the.cradle.
Caution: Do.not.use.paint.thinner,.alcohol,.or.other.chemical.products..
Doing so may discolor the surface of the telephone and damage the finish.
Low Battery Alert
When.the.battery.pack.is.very.low,.the.phone.is.programmed.to.eliminate.functions.in.
order.to.save.power..When.LOW.BATTERY.appears.in.the.display.and.the.phone.is.in.
standby,.none.of.the.keys.will.operate..If.you.are.on.a.call,.complete.your.conversation.as.
quickly.as.possible,.and.return.the.handset.to.the.cradle.
Low Battery
The.battery.pack.needs.to.be.charged.when.the.empty.battery.icon.appears.
Battery Life
With average use, your handset battery provides approximately five hours of talk time and approximately seven
days.of.standby.time..You.can.achieve.optimum.battery.life.and.performance.by.returning.the.handset.to.the.base.
or.charger.after.each.use..When.your.handset.is.left.off.of.the.cradle,.the.battery.will.gradually.discharge.even.if.
the.handset.is.not.being.used..The.actual.talk.time.duration.will.be.reduced.in.proportion.to.the.amount.of.time.the.
handset.is.off.of.the.cradle.
Power Failures
During.a.power.failure,.you.will.not.be.able.to.make.or.receive.calls.with.the.phone..To.avoid.damage.from.an.
electrical.spike.when.the.power.comes.back.on,.we.recommend.you.unplug.your.phone.during.power.outages.
48
Troubleshooting
Resetting the Handset
You.may.need.to.reset.your.handset.in.the.following.instances:
• When.you.want.to.change.the.digital.security.code.
• You.lose.a.handset.and.purchase.a.new.one.
• You.get.the.message.Registration.Failed.when.you.try.to.register.the.handset.
• You.are.unable.to.register.any.handsets.to.the.base.
• When.you.register.new.handsets.to.the.base,.the.handset.IDs.do.not.match..(For.example,.the.handset.registers.
as.“Handset.#4”.but.you.only.have.two.handsets.)
• When.you.are.instructed.to.by.one.of.Uniden’s.call.center.representatives.
ꢀ) Press.and.hold.[ ].and.[#] for more than five seconds. Select DEREGISTER HS.
2) Select.the.handset.which.you.are.operating,.then.press.[select/ ].
3) The phone will ask you to confirm the deregistration. Select YES. The selected handset will clear its registration
information.from.the.base,.and.then.delete.the.link.to.the.base.from.its.own.memory.
4) When.the.base.information.is.deleted,.the.handset.displays.HANDSET.NOT.REGISTERED-PLACE.HANDSET.
ON.BASE.TO.REGISTER..SEE.YOUR.OWNER'S.MANUAL.FOR.HELP.
If.the.handset.cannot.contact.the.base,.it.will.display.OUT.OF.RANGE..Make.sure.the.handset.is.in.range.of.the.
base.and.the.base.is.connected.to.power.
49
Resetting the Handset Without the Base
If.your.original.base.is.not.available.for.some.reason,.you.can.still.reset.the.handset.and.use.it.with.another.base.
ꢀ) Press.and.hold.[ ].and.[#] for at least five seconds.
2) Move.the.cursor.to.select.BASEUNAVAILABLE.and.then.press.[select/ ]..BASE.UNAVAILABLE.appears.
3) Move.the.cursor.to.select.YES,.and.then.press.[select/ ]. You hear a confirmation tone, and the handset
deletes.its.own.base.information.without.contacting.the.base..The.handset.displays.HANDSET.NOT.
REGISTERED-PLACE.HANDSET.ON.BASE.TO.REGISTER..SEE.YOUR.OWNER'S.MANUAL.FOR.HELP...
Changing the Digital Security Code
The digital security code is an identification code used to connect the handset and the base. Your unit ships from the
manufacturer.with.a.preset.security.code..Resetting.this.code.is.not.normally.necessary..In.the.rare.situation.that.you.
suspect.another.cordless.telephone.is.using.the.same.security.code.or.if.you.are.instructed.to.change.this.code.by.a.
manufacturer’s.Call.Center.Representative,.you.can.change.the.code..To.change.the.digital.security.code:
Traveling Out of Range
During.a.call,.if.you.move.your.handset.too.far.from.your.base,.noise.may.increase..If.you.pass.the.range.limit.of.the.
base,.the.handset.will.beep,.display.OUT.OF.RANGE,.and.then.go.to.standby..The.base.will.maintain.the.connection.
for.thirty.seconds.after.the.handset.goes.out.of.range..If.you.move.the.handset.back.within.range.of.the.base.within.
thirty.seconds,.press.[ /flash].or.[ ].to.pick.up.the.call.again.
50
Common Issues
If your phone is not performing to your expectations, please try these simple steps first. If these steps do not solve
your problem, please call our Customer Hotline (see At Uniden, we’ll take care of you! inside the back cover).
Symptom
Suggestion
• Make.sure.the.AC.adapter.is.plugged.into.the.base.or.the.charger.(if.you.have.
more.than.one.handset).and.wall.outlet.
The.charge.LED.won’t.
illuminate.when.the.handset.is. • Make.sure.the.AC.outlet.is.not.connected.to.a.wall.switch.
placed.in.the.cradle.
• Make.sure.the.handset.is.properly.seated.in.the.cradle.
• Make.sure.the.charging.contacts.on.the.handset.are.clean..
• Move.the.handset.and/or.base.away.from.metal.objects.or.appliances.
• Make.sure.that.you.are.not.too.far.from.the.base.
The.audio.sounds.weak..
• Make.sure.that.you.are.not.too.far.from.the.base.
• Make.sure.the.line.is.not.in.use..If.an.outside.call.is.already.using.a.line,..
you.cannot.use.that.line.to.make.another.outside.call.
• Make.sure.your.handset.is.registered.to.the.main.base.unit.
• Check.both.ends.of.the.base.telephone.cord.
Can’t.make.or.receive.calls.
• Make.sure.the.AC.adapter.is.plugged.into.the.base.and.wall.outlet.
• Disconnect.the.AC.adapter.and.reconnect.
• Keep.the.handset.away.from.microwave.ovens,.computers,.remote.control.toys,.
wireless microphones, alarm systems, intercoms, room monitors, fluorescent
lights,.and.electrical.appliances.
Severe.noise.interference.
• Move.to.another.location.or.turn.off.the.source.of.interference.
• The.call.was.placed.through.a.switchboard.
The.Caller.ID.does.not.display.. • Call.your.telephone.provider.to.verify.your.Caller.ID.service.is.current...
There.may.be.a.problem.with.your.Caller.ID.service..
5ꢀ
Symptom
Suggestion
• Make.sure.that.you.are.not.too.far.from.the.base.
• Make.sure.that.your.handset.is.registered.to.the.main.base.unit.
• Charge.the.battery.in.the.handset.for.ꢀ5.to.20.hours.
The.handset.doesn’t.ring.or.
receive.a.page.
• Charge.the.battery.pack.in.the.handset.for.ꢀ5.to.20.hours.
You.cannot.register.the.
handset.at.the.base.
The.handset.doesn’t.
communicate.with.other.
handsets..
An.extra.handset.can’t.join.the. • Make.sure.there.are.not.two.handsets.already.using.the.conference.feature.
conversation.
• Make.sure.that.another.handset.is.not.in.privacy.mode.
• Make.sure.the.base.is.plugged.in.
• Make.sure.that.the.answering.system.is.turned.on.
• Make.sure.that.the.message.record.time.is.not.set.to.announce.only.
The.answering.system.does.
not.work.
Time.stamp.cannot.be.heard.. • Make.sure.you.have.set.the.time.(see.Setting.the.Day.and.Time.on.page.4ꢀ).
• Incoming.messages.may.be.too.long..Ask.callers.to.leave.a.brief.message.
Messages.are.incomplete..
• The.memory.may.be.full..Delete.some.or.all.of.the.saved.messages..
There.is.no.sound.on.the.base.
• Adjust.the.speaker.volume.on.the.base.or.handset.
or.handset.speaker.during.call.
• Make.sure.the.call.screen.feature.is.set.to.on.
monitoring.or.message.review.
• Make.sure.you.are.using.the.correct.PIN.number.
Cannot.access.answering.
• Make.sure.that.the.touch-tone.phone.you’re.using.can.transmit.the.tone.for.at.
system.from.a.remote.phone..
least.two.seconds..If.it.cannot,.try.using.a.different.touch-tone.phone.
52
Liquid Damage
Moisture.and.liquid.can.damage.your.cordless.phone.
• If.the.handset.or.base.is.exposed.to.moisture.or.liquid,.but.only.the.exterior.plastic.housing.is.affected,.wipe.off.
the.liquid,.and.use.as.normal..
• If.moisture.or.liquid.has.entered.the.plastic.housing.(i.e..liquid.can.be.heard.in.the.phone.or.liquid.has.entered.the.
handset.battery.compartment.or.vent.openings.on.the.base),.follow.the.steps.below:
Handset
Base
ꢀ) Remove.the.battery.cover.and.leave.it.off.for.
ꢀ) Disconnect.the.AC.adapter.from.the.base,.cutting.
ventilation.
off.electrical.power.
2) Disconnect.the.battery.pack..Leave.the.battery.
cover.off.and.the.battery.pack.disconnected.for.at.
least.3.days.
2) Disconnect.the.telephone.cord.from.the.base.
3) Let.dry.for.at.least.3.days..
3) Once.the.handset.is.completely.dry,.reconnect.the.
battery.pack.and.the.battery.cover.
4) Recharge.the.handset’s.battery.pack.for.ꢀ5.to.20.
hours.before.using..
IMPORTANT:.You.must.unplug.the.telephone.line.while.recharging.the.battery.packs.to.avoid.charge.interruption.
CAUTION: DO NOT use a microwave oven to speed up the drying process. This will cause permanent
damage to the handset, base and the microwave oven. After following these steps, if your
cordless telephone does not work, please call our Customer Service Hotline (see inside the back
53
Warning!
Precautions!
The.cords.on.this.product.and/or.accessories.contain.lead,.a.
chemical.known.to.the.State.of.California.to.cause.birth.defects.
or.other.reproductive.harm..Wash.hands.after.handling.
Before.you.read.anything.else,.please.observe.the.following:
Warning!
Uniden.America.Corporation.DOES.NOT.represent.this.unit.
to be waterproof. To reduce the risk of fire, electrical shock,
or.damage.to.the.unit,.DO.NOT.expose.this.unit.to.rain.or.
moisture..
Important Safety Instructions
When.using.your.telephone.equipment,.basic.safety.
precautions should always be followed to reduce the risk of fire,
electric.shock.and.injury.to.persons,.including.the.following:.
ꢀ. Do.not.use.this.product.near.water,.for.example,.near.
a.bath.tub,.wash.bowl,.kitchen.sink.or.laundry.tub,.in.a.
wet.basement.or.near.a.swimming.pool..
Rechargeable Nickel-Metal-Hydride
Battery Warning
•
•
•
This.equipment.contains.a.rechargeable.Nickel-Metal-
2. Avoid.using.a.telephone.(other.than.a.cordless.type).
during.an.electrical.storm..There.may.be.a.remote.risk.
of.electric.shock.from.lightning..
Hydride.battery..
The.rechargeable.batteries.contained.in.this.equipment.
may explode if disposed of in a fire.
Nickel.is.a.chemical.known.to.state.of.California.to.cause.
cancer..
3. Do.not.use.the.telephone.to.report.a.gas.leak.in.the.
vicinity.of.the.leak..
4. Use.only.the.power.cord.and.batteries.indicated.in.
this manual. Do not dispose of batteries in a fire. They
may.explode..Check.with.local.authorities.for.possible.
battery.disposal.instructions..
•
•
Do.not.short-circuit.the.battery..
Do.not.charge.the.rechargeable.battery.used.in.this.
equipment.in.any.charger.other.than.the.one.designed.to.
charge this battery as specified in the owner's manual.
Using.another.charger.may.damage.the.battery.or.cause.
the.battery.to.explode..
5. Do.not.disassemble.any.component.of.this.product.
SAVE THESE INSTRUCTIONS
CAUTION
Risk.of.explosion.if.battery.is.replaced.by.an.incorrect.type..
Dispose.of.used.batteries.according.to.the.instructions..Do.not.
open.or.mutilate.the.battery,.and.disconnect.the.battery.before.
shipping.this.product.
Rechargeable.Batteries.Must.Be.Recycled.or.Disposed.of.
Properly.
Uniden.works.to.reduce.lead.content.in.our.PVC.coated.cords.
in.our.products.and.accessories.
54
Please.follow.instructions.for.repairing,.if.any.(e.g..battery.replacement.
section);.otherwise.do.not.substitute.or.repair.any.parts.of.the.device.
except as specified in this manual. Connection to party line service is
subject.to.state.tariffs..Contact.the.state.public.utility.commission,.public.
service.commission.or.corporation.commission.for.information..This.
equipment.is.hearing.aid.compatible.
The FCC Wants You To Know
This.equipment.complies.with.Part.68.of.the.FCC.rules.and.the.
requirements.adopted.by.the.ACTA..On.the.bottom.of.this.equipment.
is a label that contains, among other information, a product identifier
in.the.format.US:.AAAEQ##TXXXX..If.requested,.this.number.must.be.
provided.to.the.telephone.company.
An applicable Universal Service Order Codes (USOC) certification
for.the.jacks.used.in.this.equipment.is.provided.(i.e.,.RJꢀꢀC).in.the.
packaging.with.each.piece.of.approved.terminal.equipment..A.plug.
and.jack.used.to.connect.this.equipment.to.the.premises.wiring.and.
telephone.network.must.comply.with.the.applicable.FCC.Part.68.rules.
and.requirements.adopted.by.the.ACTA..A.compliant.telephone.cord.
and.modular.plug.is.provided.with.this.product..It.is.designed.to.be.
connected.to.a.compatible.modular.jack.that.is.also.compliant..See.
installation.instructions.for.details.
Should.you.experience.trouble.with.this.equipment,.please.contact.
Uniden.customer.service.at.800-297-ꢀ023..If.the.equipment.is.causing.
harm.to.the.telephone.network,.the.telephone.company.may.request.that.
you.disconnect.the.equipment.until.the.problem.is.resolved..
NOTICE:.According.to.telephone.company.reports,.AC.electrical.surges,.
typically.resulting.from.lightning.strikes,.are.very.destructive.to.telephone.
equipment.connected.to.AC.power.sources..To.minimize.damage.from.
these.types.of.surges,.a.surge.arrestor.is.recommended.
Changes or modifications to this product not expressly approved by
Uniden,.or.operation.of.this.product.in.any.way.other.than.as.detailed.by.
the.owner’s.manual,.could.void.your.authority.to.operate.this.product.
The.REN.is.used.to.determine.the.number.of.devices.that.may.be.
connected.to.a.telephone.line..Excessive.RENs.on.a.telephone.line.
may.result.in.the.devices.not.ringing.in.response.to.an.incoming.call..In.
most but not all areas, the sum of RENs should not exceed five (5.0).
To.be.certain.of.the.number.of.devices.that.may.be.connected.to.a.line,.
as.determined.by.the.total.RENs,.contact.the.telephone.provider..For.
products.approved.after.July.23,.200ꢀ,.the.REN.for.this.product.is.part.
of the product identifier that has the format US:AAAEQ##TXXXX. The
digits.represented.by.##.are.the.REN.without.a.decimal.point.(e.g.,.03.
is.a.REN.of.0.3)..For.earlier.products,.the.REN.is.separately.shown.on.
the.label.
This.device.complies.with.part.ꢀ5.of.the.FCC.rules..Operation.is.subject.
to.the.following.two.conditions:.(ꢀ).This.device.may.not.cause.harmful.
interference,.and.(2).This.device.must.accept.any.interference.received,.
including.interference.that.may.cause.undesired.operation..Privacy.of.
communications.may.not.be.ensured.when.using.this.phone.
To.insure.the.safety.of.users,.the.FCC.has.established.criteria.for.
the.amount.of.radio.frequency.energy.various.products.may.produce.
depending.on.their.intended.usage..This.product.has.been.tested.
and.found.to.comply.with.the.FCC’s.exposure.criteria..For.body.worn.
operation,.the.FCC.RF.exposure.guidelines.were.also.met.when.used.
with.the.Uniden.accessories.supplied.or.designed.for.this.product..Use.
of.other.accessories.may.not.ensure.compliance.with.FCC.RF.exposure.
guidelines.and.should.be.avoided.
If.this.equipment.causes.harm.to.the.telephone.network,.the.telephone.
company.will.notify.you.in.advance.that.temporary.discontinuance.
of.service.may.be.required..But.if.advance.notice.isn’t.practical,.the.
telephone.company.will.notify.the.customer.as.soon.as.possible..Also,.
you will be advised of your right to file a complaint with the FCC if you
believe.it.is.necessary...The.telephone.company.may.make.changes.in.
its.facilities,.equipment,.operations.or.procedures.that.could.affect.the.
operation.of.the.equipment..If.this.happens.the.telephone.company.will.
provide advance notice in order for you to make necessary modifications
to.maintain.uninterrupted.service.
The.antenna(s).used.for.the.base-unit.must.be.installed.to.provide.a.
separation.distance.of.at.least.20.cm.from.all.persons.and.must.not.
be.collocated.or.operated.in.conjunction.with.any.other.antenna.or.
transmitter.
55
Radio Interference
I.C. Notice
Radio.interference.may.occasionally.cause.buzzing.and.
humming.in.your.cordless.handset,.or.clicking.noises.in.the.
base..This.interference.is.caused.by.external.sources.such.
as TV, refrigerator, vacuum cleaner, fluorescent lighting, or
electrical.storm..Your.unit.is.NOT.DEFECTIVE..If.these.noises.
continue.and.are.too.distracting,.please.check.around.your.
home.to.see.what.appliances.may.be.causing.the.problem..
In.addition,.we.recommend.that.the.base.not.be.plugged.into.
a.circuit.that.also.powers.a.major.appliance.because.of.the.
potential.for.interference..Be.certain.that.the.antenna.on.the.
unit.is.fully.extended.when.needed..In.the.unlikely.event.that.
you.consistently.hear.other.voices.or.distracting.transmissions.
on.your.phone,.you.may.be.receiving.radio.signals.from.
another.cordless.telephone.or.other.source.of.interference..
If.you.cannot.eliminate.this.type.of.interference,.you.need.to.
change.to.a.different.channel.
Finally,.it.should.be.noted.that.some.cordless.telephones.
operate.at.frequencies.that.may.cause.interference.to.nearby.
TVs.and.VCRs..To.minimize.or.prevent.such.interference,.the.
base.of.the.cordless.telephone.should.not.be.placed.near.or.on.
top.of.a.TV.or.VCR..If.interference.is.experienced,.moving.the.
cordless.telephone.farther.away.from.the.TV.or.VCR.will.often.
reduce.or.eliminate.the.interference..
Terminal Equipment
NOTICE:.This.equipment.meets.the.applicable.Industry.
Canada Terminal Equipment Technical Specifications. This is
confirmed by the registration number. The abbreviation, IC,
before the registration number signifies that registration was
performed.based.on.a.Declaration.of.Conformity.indicating.that..
Industry Canada technical specifications were met. It does not
imply.that.Industry.Canada.approved.the.equipment.
NOTICE:.The.Ringer.Equivalence.Number.(REN).for.this.
terminal.equipment.is.marked.on.the.equipment.itself..The.REN.
assigned.to.each.terminal.equipment.provides.an.indication.
of.the.maximum.number.of.terminals.allowed.to.be.connected.
to.a.telephone.interface..The.termination.on.an.interface.may.
consist.of.any.combination.of.devices.subject.only.to.the.
requirement.that.the.sum.of.the.Ringer.Equivalence.Numbers.
of all the devices does not exceed five.
Radio Equipment
The term “IC:” before the radio certification number only signifies
that Industry Canada technical specifications were met.
Cordless Telephone Privacy
Operation.is.subject.to.the.following.two.conditions:.(ꢀ).this.
device.may.not.cause.interference,.and.(2).this.device.must.
accept.any.interference,.including.interference.that.may.cause.
undesired.operation.of.the.device..“Privacy.of.communications.
may.not.be.ensured.when.using.this.telephone.”
Cordless.telephones.are.radio.devices..Communications.
between.the.handset.and.base.of.your.cordless.telephone.
are.accomplished.by.means.of.radio.waves.which.are.
broadcast.over.the.open.airways..Because.of.the.inherent.
physical.properties.of.radio.waves,.your.communications.can.
be.received.by.radio.receiving.devices.other.than.your.own.
cordless.telephone.unit..Consequently,.any.communications.
using.your.cordless.telephone.may.not.be.private.
56
A.PARTICULAR.PURPOSE..THIS.WARRANTY.DOES.
NOT.COVER.OR.PROVIDE.FOR.THE.REIMBURSEMENT.
OR.PAYMENT.OF.INCIDENTAL.OR.CONSEQUENTIAL.
DAMAGES..
One Year Limited Warranty
Important:.Evidence.of.original.purchase.is.required.for.
warranty.service..WARRANTOR:.UNIDEN.AMERICA.
CORPORATION.(“Uniden”).ELEMENTS.OF.WARRANTY:.
Uniden.warrants,.for.one.year,.to.the.original.retail.owner,.
this.Uniden.Product.to.be.free.from.defects.in.materials.and.
craftsmanship.with.only.the.limitations.or.exclusions.set.out.
below..WARRANTY.DURATION:.This.warranty.to.the.original.
user.shall.terminate.and.be.of.no.further.effect.ꢀ2.months.
after.the.date.of.original.retail.sale..The.warranty.is.invalid.if.
the.Product.is.(A).damaged.or.not.maintained.as.reasonable.
or necessary, (B) modified, altered, or used as part of any
conversion kits, subassemblies, or any configurations not sold
by.Uniden,.(C).improperly.installed,.(D).serviced.or.repaired.by.
someone.other.than.an.authorized.Uniden.service.center.for.a.
defect.or.malfunction.covered.by.this.warranty,.(E)
Some.states.do.not.allow.this.exclusion.or.limitation.of.
incidental.or.consequential.damages.so.the.above.limitation.or.
exclusion.may.not.apply.to.you.
LEGAL REMEDIES: This warranty gives you specific legal
rights,.and.you.may.also.have.other.rights.which.vary.from.
state.to.state..This.warranty.is.void.outside.the.United.States.
of.America.and.Canada..PROCEDURE.FOR.OBTAINING.
PERFORMANCE.OF.WARRANTY:.If,.after.following.the.
instructions.in.the.owner’s.manual.you.are.certain.that.the.
Product.is.defective,.pack.the.Product.carefully.(preferably.
in.its.original.packaging)..Disconnect.the.battery.from.the.
Product.and.separately.secure.the.battery.in.its.own.separate.
packaging.within.the.shipping.carton..The.Product.should.
include.all.parts.and.accessories.originally.packaged.with.the.
Product..Include.evidence.of.original.purchase.and.a.note.
describing.the.defect.that.has.caused.you.to.return.it..The.
Product.should.be.shipped.freight.prepaid,.by.traceable.means,.
to.warrantor.at:.
used.in.any.conjunction.with.equipment.or.parts.or.as.part.of.
any.system.not.manufactured.by.Uniden,.or.(F).installed.or.
programmed.by.anyone.other.than.as.detailed.by.the.owner’s.
manual.for.this.product..STATEMENT.OF.REMEDY:.In.the.
event.that.the.product.does.not.conform.to.this.warranty.at.
any.time.while.this.warranty.is.in.effect,.warrantor.will.either,.
at.its.option,.repair.or.replace.the.defective.unit.and.return.
it.to.you.without.charge.for.parts,.service,.or.any.other.cost.
(except.shipping.and.handling).incurred.by.warrantor.or.its.
representatives.in.connection.with.the.performance.of.this.
warranty..Warrantor,.at.its.option,.may.replace.the.unit.with.
a.new.or.refurbished.unit..THE.LIMITED.WARRANTY.SET.
FORTH.ABOVE.IS.THE.SOLE.AND.ENTIRE.WARRANTY.
PERTAINING.TO.THE.PRODUCT.AND.IS.IN.LIEU.OF.
AND.EXCLUDES.ALL.OTHER.WARRANTIES.OF.ANY.
NATURE.WHATSOEVER,.WHETHER.EXPRESS,.IMPLIED.
OR.ARISING.BY.OPERATION.OF.LAW,.INCLUDING,.
BUT.NOT.LIMITED.TO.ANY.IMPLIED.WARRANTIES.OF.
MERCHANTABILITY.OR.FITNESS.FOR
Uniden America Service
4700.Amon.Carter.Blvd.
Fort.Worth,.TX.76ꢀ55
57
O
S
Security.code
P
Digital........................................ 50
Personal Identification Number
T
V
Storing.Caller.ID.or.redial.
W
R
Redial
Ringer
59
Remote Operation Card
C U T
C U T
REMOTE OPERATION CARD
REMOTE OPERATION CARD
Remote access
away from home
Turn on the answering
system remotely
Remote access
away from home
Turn on the answering
system remotely
1. Call your phone and let it ring
10 times until you hear a beep.
2. Press 0 and then enter your
PIN code.
3. Press 0 then 5 to stop
the announcement.
1. Call your phone and let it ring
10 times until you hear a beep.
2. Press 0 and then enter your
PIN code.
3. Press 0 then 5 to stop
the announcement.
1. Call your phone number from a
touch-tone phone.
1. Call your phone number from a
touch-tone phone.
2. During the outgoing message,
press 0 and enter your PIN code.
The answering system announces
the number of messages stored in
memory and the voice prompts.
3. To quit, hang up the phone.
2. During the outgoing message,
press 0 and enter your PIN code.
The answering system announces
the number of messages stored in
memory and the voice prompts.
3. To quit, hang up the phone.
4. Press 0 then 6 to turn the
answering system on.
4. Press 0 then 6 to turn the
answering system on.
C U T
C U T
REMOTE OPERATION CARD
REMOTE OPERATION CARD
Remote access
away from home
Turn on the answering
system remotely
Remote access
away from home
Turn on the answering
system remotely
1. Call your phone and let it ring
10 times until you hear a beep.
2. Press 0 and then enter your
PIN code.
3. Press 0 then 5 to stop
the announcement.
1. Call your phone and let it ring
10 times until you hear a beep.
2. Press 0 and then enter your
PIN code.
3. Press 0 then 5 to stop
the announcement.
1. Call your phone number from a
touch-tone phone.
1. Call your phone number from a
touch-tone phone.
2. During the outgoing message,
press 0 and enter your PIN code.
The answering system announces
the number of messages stored in
memory and the voice prompts.
3. To quit, hang up the phone.
2. During the outgoing message,
press 0 and enter your PIN code.
The answering system announces
the number of messages stored in
memory and the voice prompts.
3. To quit, hang up the phone.
4. Press 0 then 6 to turn the
answering system on.
4. Press 0 then 6 to turn the
answering system on.
60
C U T
C U T
Task
Repeat a Message
Key
Task
Repeat a Message
Key
Play Incoming Messages
Skip a Message
Play Incoming Messages
Skip a Message
Delete a Message
Stop Operation
Delete a Message
Stop Operation
Answering System On
Answering System Off
Help
Answering System On
Answering System Off
Help
C U T
C U T
Task
Repeat a Message
Key
Task
Repeat a Message
Key
Play Incoming Messages
Skip a Message
Play Incoming Messages
Skip a Message
Delete a Message
Stop Operation
Delete a Message
Stop Operation
Answering System On
Answering System Off
Help
Answering System On
Answering System Off
Help
6ꢀ
At Uniden, we’ll take care of you!
Thank you for purchasing a Uniden product. if you have any questions or problems, please do not return
this product to the place of purchase.
Having trouble?
Our customer care specialists are here to help you! Visit our web-site at
www.uniden.com.or.call.our.Customer.Service.Hotline.at.
1-800-297-1023.during.regular.business.hours.*
Need a part?
To.order.headsets,.accessory.handsets,.replacement.batteries,.or.other.
1-800-554-3988.during.regular.business.hours.*.
Help for our
customers with
special needs
If.you.need.special.assistance.due.to.a.disability.or.have.questions.on.the.
accessibility.features.of.this.product,.please.call.
1-800-874-9314 (voice.or.TTY).
*.Central.Standard.Time..Detailed.customer.service.hours.are.available.at.www.uniden.com.
May.be.covered.under.one.or.more.of.the.following.U.S..patents:
4,797,9ꢀ6
5,650,790
5,754,407
5,893,034
6,070,082
6,782,098
6,953,ꢀꢀ8
5,426,690
5,660,269
5,758,289
5,9ꢀ2,968
6,ꢀ25,277
6,788,920
7,023,ꢀ76
5,434,905
5,66ꢀ,780
5,768,345
5,9ꢀ5,227
6,253,088
6,788,953
7,030,8ꢀ9
5,49ꢀ,745
5,663,98ꢀ
5,787,356
5,929,598
6,3ꢀ4,278
6,839,550
7,ꢀ46,ꢀ60
5,493,605
5,67ꢀ,248
5,794,ꢀ52
5,930,720
6,4ꢀ8,209
6,889,ꢀ84
5,533,0ꢀ0
5,696,47ꢀ
5,80ꢀ,466
5,960,358
6,6ꢀ8,0ꢀ5
6,90ꢀ,27ꢀ
5,574,727
5,7ꢀ7,3ꢀ2
5,825,ꢀ6ꢀ
5,987,330
6,67ꢀ,3ꢀ5
6,907,094
5,58ꢀ,598
5,732,355
5,864,6ꢀ9
6,044,28ꢀ
6,7ꢀ4,630
6,9ꢀ4,940
Other.patents.pending.
62
®
AWorld Without Wires
VISIT
WWW.UNIDEN.COM
TO REGISTER YOUR
PRODUCT
© 2007 Uniden America Corp., Fort Worth, Texas. Contains additional foreign articles. Printed in China.
UPZZ01855BZ(0)
|
Technicolor Thomson Portable Radio RT234L User Manual
Texas Instruments PDAs Smartphones TI 83 PLUS User Manual
Toshiba Computer Drive AF 512E User Manual
Toshiba Flat Panel Television 22AV600U User Manual
Tripp Lite Switch B051 000 IP User Manual
Verbatim Computer Drive 94576 User Manual
Verilux Camping Equipment VA04 User Manual
Viking Cooktop F20033C User Manual
Vivitar Digital Camera S529 User Manual
Wagner SprayTech Paint Sprayer Finish 250 User Manual