Sansui Flat Panel Television SLED4280 User Guide

OWNER’S MANUAL  
GUIDE D’UTILISATION  
42/46” CLASS WIDE LED TV  
TÉLÉVISEUR DEL GRAND ÉCRAN CATÉGORIE 42/46 PO  
SLED4280  
SLED4680  
ATTENTION  
ATTENTION  
If you purchase a universal remote control from your local retailer, please contact the remote manufacturer for the  
required programming code.  
Si vous utilisez avec cet appareil une télécommande universelle (autre que celle vendue avec ce téléviseur),  
consultez la documentation accompagnant la télécommande universelle afin de connaître le code numérique cor-  
respondant au téléviseur.  
AIR/CABLE MODE SELECTION  
SÉLECTION DU MODE AIR/CABLE  
When shipped from the factory, the Signal Type option is set to the “Cable” (Cable Television) mode.  
If not using Cable TV, set this menu option to the “Air” position.  
Lorsque l’appareil sort de l’usine, l’option Signal Type est en mode « Cable » (câblodistribution). Si vous  
n’utilisez pas la câblodistribution, sélectionnez l’option « Air ».  
IF CONTACT WITH CUSTOMER SERVICE IS REQUIRED  
PLEASE HAVE THE MODEL NUMBER READY PRIOR TO THE CALL.  
S’IL FAUT CONTACTER LE SERVICE CLIENTÈLE, PRENEZ SOIN D’ÊTRE MUNI  
DU NUMÉRO DE MODÈLE AVANT D’APPELER.  
CUSTOMER SERVICE – 1-800-289-0980  
SERVICE/SERVICE CLIENTÈLE: 1-800-289-0980  
ORION WEBSITE  
SITE WEB ORION  
FOR INFORMATION ON OUR OTHER PRODUCTS AND RECYCLING INFORMATION, PLEASE VISIT OUR WEBSITE AT  
POUR OBTENIR DES INFORMATIONS SUR NOS AUTRES PRODUITS ET LE RECYCLAGE, VEUILLEZVISITER NOTRE SITE WEB:  
Before operating the unit, please read this manual thoroughly.  
Avant de faire fonctionner l’appareil, veuillez lire le présent guide attentivement.  
 
15) Apparatus should not be exposed to dripping or splashing, and objects filled with liquids, such as  
vases, should not be placed on the apparatus.  
16) An outside antenna system should not be located in the vicinity of overhead power lines or other  
electric light or power circuits, or where it can fall into such power lines or circuits. When installing an  
outside antenna system, extreme care should be taken to keep from touching such power lines or  
circuits, as contact with them might be fatal.  
17) Do not overload wall outlets and extension cords, as this can result in a risk of fire or electric shock.  
18) Do not push objects through any openings in this unit, as they may touch dangerous voltage points  
or short out parts that could result in fire or electric shock. Never spill or spray any type of liquid into  
the unit.  
19) If an outside antenna or cable system  
is connected to the unit, be sure the  
antenna or cable system is grounded  
to provide some protection against  
voltage surges and built-up static  
EXAMPLE OF ANTENNA GROUNDING AS PER THE NATIONAL ELECTRICAL CODE  
ANTENNA LEAD IN WIRE  
GROUND  
CLAMP  
ANTENNA  
DISCHARGE UNIT  
(NEC SECTION 810-20)  
charges, Section 810 of the National  
Electrical Code, ANSI/NFPA 70, provides  
information with respect to proper  
grounding of the mast and supporting  
structure, grounding of the lead-in  
wire to an antenna discharge unit, size  
of grounding conductors, location of  
antenna discharge unit, connection to  
ELECTRIC SERVICE  
EQUIPMENT  
GROUNDING CONDUCTORS  
(NEC SECTION 810-21)  
GROUND CLAMPS  
NEC-NATIONAL ELECTRICAL CODE  
S2898A  
POWER SERVICE GROUNDING  
ELECTRODE SYSTEM  
(NEC ART 250, PART H)  
grounding electrodes, and requirements for the grounding electrode.  
 
3
IMPORTANT SAFETY INSTRUCTIONS  
20) When replacement parts are required, be sure the service technician uses replacement parts  
specified by the manufacturer or those that have the same characteristics as the original part.  
Unauthorized substitutions may result in fire, electric shock or other hazards.  
21) Upon completion of any service or repairs to this unit, ask the service technician to perform safety  
checks to determine that the unit is in proper operating condition.  
22) When you connect the product to other equipment, turn off the power and unplug all of the  
equipment from the wall outlet. Failure to do so may cause an electric shock and serious personal  
injury. Read the owner's manual of the other equipment carefully and follow the instructions when  
making any connections.  
23) Sudden high volume sound may cause hearing or speaker damage. When you use headphones,  
(if the unit is equipped with a headphone jack) keep the volume at a moderate level. If you use  
headphones continuously with high volume sound, it may cause hearing damage.  
24) Do not allow the product to output distorted sound for an extended period of time. It may cause  
speaker overheating and fire.  
25) This reminder is provided to call the cable TV system installer’s attention to Article 820-40 of the  
NEC that provides guidelines for proper grounding and, in particular, specifies that the cable ground  
shall be connected to the grounding system of the building, as close to the point of cable entry as  
practical.  
26) The socket-outlet must be installed near the unit and easily accessible.  
CHILD SAFETY:  
It Makes A Difference How and Where You Use Your Flat Panel Display  
Congratulations on your purchase! As you enjoy your new product, please keep these safety tips in mind:  
THE ISSUE  
The home theater entertainment experience is a growing trend and larger flat panel displays are popular  
purchases. However, flat panel displays are not always supported on the proper stands or installed  
according to the manufacturer’s recommendations.  
Flat panel displays that are inappropriately situated on dressers, bookcases, shelves, desks, speakers,  
chests or carts may fall over and cause injury.  
THIS MANUFACTURER CARES!  
The consumer electronics industry is committed to making home entertainment enjoyable and safe.  
TUNE INTO SAFETY  
One size does NOT fit all. Follow the manufacturer’s recommendations for the safe installation and use of  
your flat panel display.  
Carefully read and understand all enclosed instructions for proper use of this product.  
Don’t allow children to climb on or play with furniture and television sets.  
Don’t place flat panel displays on furniture that can easily be used as steps, such as a chest of drawers.  
Remember that children can become excited while watching a program, especially on a “larger than life” flat  
panel display. Care should be taken to place or install the display where it cannot be pushed, pulled over, or  
knocked down.  
Care should be taken to route all cords and cables connected to the flat panel display so that they cannot be  
pulled or grabbed by curious children.  
WALL MOUNTING: IF YOU DECIDE TO WALL MOUNT YOUR FLAT PANEL DISPLAY, ALWAYS:  
Use a mount that has been recommended by the display manufacturer and/or listed by an independent  
laboratory (such as UL, CSA, ETL).  
Follow all instructions supplied by the display and wall mount manufacturers.  
If you have any doubts about your ability to safely install your flat panel display, contact your retailer about  
professional installation.  
Make sure that the wall where you are mounting the display is appropriate to support the weight of the unit/  
product and wall mount. If you are unsure, contact a professional installer.  
A minimum of two people are required for installation. Flat panel displays can be heavy.  
 
4
IMPORTANT SAFETY INSTRUCTIONS  
CONDENSATION  
Moisture will form in the operating section of the unit if the unit is brought from cool surroundings into a warm  
room or if the temperature of the room rises suddenly. When this happens, unit's performance will be impaired.  
To prevent this, let the unit stand in its new surroundings for about an hour before switching it on, or make sure  
that the room temperature rises gradually.  
Condensation may also form during the summer if the unit is exposed to the breeze from an air conditioner. In  
such cases, change the location of the unit.  
HOW TO HANDLE THE LCD PANEL  
• Do not press hard or jolt the LCD panel. It may cause the LCD panel glass to break and injury may occur.  
• If the LCD panel is broken, make absolutely sure that you do not touch the liquid in the panel. This may cause  
skin inflammation.  
If the liquid gets in your mouth, immediately gargle and consult with your doctor. Also, if the liquid gets in your  
eyes or touches your skin, consult with your doctor after rinsing for at least 15 minutes or longer in clean water.  
Possible Adverse Effects on LCD Panel: If a fixed (non-moving) pattern remains on the LCD Panel for  
long periods of time, the image can become permanently engrained in the LCD Panel and cause subtle but  
permanent ghost images. This type of damage is NOT COVERED BY YOUR WARRANTY. Never leave your  
LCD Panel on for long periods of time while it is displaying the following formats or images:  
• Fixed Images, such as stock tickers, video game patterns, TV station logos, and websites.  
• Special Formats that do not use the entire screen. For example, viewing letterbox style (16:9) media on  
a normal (4:3) display (black bars at top and bottom of screen); or viewing normal style (4:3) media on a  
widescreen (16:9) display (black bars on left and right sides of screen).  
The following symptoms are not signs of malfunction but technical limitation. Therefore we disclaim any  
responsibility for these symptoms.  
• LCD Panels are manufactured using an extremely high level of precision technology, however sometimes  
parts of the screen may be missing picture elements or have luminous spots.  
This is not a sign of a malfunction.  
• Do not install the LCD Panel near electronic equipment that produces electromagnetic waves. Some  
equipment placed too near this unit may cause interference.  
• Effect on infrared devices – There may be interference while using infrared devices such as infrared cordless  
headphones.  
SAFETY PRECAUTIONS  
The unit emits heat when in operation. Do not place any covers or blankets on the unit, this may cause overheating.  
Do not block ventilation holes, or set up near radiators. Do not place in direct sunshine. When placing on a shelf leave 10 cm  
(4 inches) free space around the entire unit.  
10cm  
10cm  
Notes when mounting the LCD TV on a wall  
If the unit is to be mounted on the wall, contact the retailer where  
you purchased the LCD TV for advice, and have the equipment  
professionally installed. Incomplete or improper installation may  
cause injury to you, and/or damage to the LCD TV.  
Bracket holes:To attach a wall mounting bracket (not supplied) attach  
where indicated in the drawing right.  
This manufacturer recommends professional installation.  
Utilize an appropriate bracket and fasteners, sufficient to  
accommodate the size and weight of the unit.  
Bracket holes  
Assure the wall to which the unit is to be mounted will safely support  
the size and weight of the unit, using the bracket and fasteners you  
have selected.  
Keep cords and cables connected to this flat panel display out of  
reach of children.  
To hang the television on a wall, remove these screws and then  
remove a stand. Before performing work spread cushioning over the  
base area to lay the TV on.  
Illustration is SLED4280  
Screws  
 
5
How to attach the stand  
NOTE:  
• Unplug the AC cord from the AC outlet.  
• Ensure that unpacking and transfer of the unit is carried out by two or more people.  
• Before beginning this process, assure that the TV is laid on a clean, safe, and cushioned surface to avoid  
any damage to the unit.  
• Do not touch or press the TV-screen, glass might break under pressure.  
Place the TV on its front onto a table.  
Align the stand’s bottom-plate (supplied) as seen here.  
It will t in only one direction.  
Hold the unit and attach the stand slowly, as shown in Figure 1.  
LCD PANEL SIDE  
Figure 1  
Illustration is SLED4280  
Figure 2  
Finally secure the bottom-plate with 4 screws (supplied) as indicated by the arrows in Figure 2.  
• Be sure to follow the instructions. Insufficient tightening or incorrect installation of the stand will not support  
your unit correctly, and could result in damage or injury from tip-over.  
How to remove the stand  
When you transport this product, remove the stand and pack at against the back of the unit in the carton. To  
remove the stand, perform these steps in reverse order.  
For wall mounting, the base must be removed. To disconnect the base/stand remove the 4 screws from the back  
(see page 5).  
 
6
Features  
• LED Backlight System - It realize thin profile, low power consumption, eco-friendly Hg-less design and high  
contrast picture.  
• Integrated Digital Tuner - You can view digital broadcasts without using a Digital TV Set-Top Box.  
• Closed Caption Decoder With Full Text Mode - Displays text captions or full screen text on the screen for  
hearing impaired viewers.  
• Picture Adjustments Using The Remote Control - The On-Screen display allows precise remote control  
adjustment of BRIGHTNESS, CONTRAST, COLOR, TINT and SHARPNESS.  
• Programmable TV Sleep Timer - Operable from the remote control, the LCD TV can be programmed for up  
to 120 minutes to turn off automatically.  
• V-Chip - The V-Chip function can read the rating of a broadcast program or movie content if the program is  
encoded with this information. V-Chip will allow you to set a restriction level.  
• Digital Audio Jack (Coaxial) - When a component with a built-in Dolby Digital decoder is connected, Dolby  
Digital sound can produce the effect of being in a movie theater or a concert hall.  
• HDMI/Component Video Jacks - A VCR, DVD player, satellite receiver or other audio/video component can  
be connected to this unit.  
• On-Screen 3 Language Display - You can select one of 3 languages, English, French or Spanish for on-  
screen programming.  
* Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of  
Dolby Laboratories.  
* HDMI, the HDMI Logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of  
HDMI Licensing LLC in the United States and other countries.  
Power source  
TO USE AC POWER  
Connect the AC cord into an AC outlet.  
AC Outlet  
AC 120V, 60Hz  
AC cord  
Illustration is SLED4280  
NOTE:  
• Please make sure to insert the cord securely the wall outlet.  
• The AC cord has a grounding-type AC line plug. If the supplied AC cord does not match you AC outlet,  
contact a qualified electrician, do not defeat the purpose of a grounding plug.  
WARNING:  
• DO NOT CONNECT THIS UNIT TO THE POWER USING ANY DEVICE OTHER THAN THE SUPPLIED AC  
CORD. THIS COULD CAUSE FIRE, ELECTRICAL SHOCK, OR DAMAGE.  
CAUTION:  
• WHEN THIS UNIT IS NOT USED FOR A LONG TIME, (E.G., AWAY ON A TRIP) IN THE INTEREST OF  
SAFETY, BE SURE TO UNPLUG IT FROM THE AC OUTLET.  
• DO NOT PLUG/UNPLUG THE AC CORD WHEN YOUR HANDS ARE WET. THIS MAY CAUSE ELECTRICAL  
SHOCK.  
 
7
Contents  
Before using your unit  
IMPORTANT SAFETY INSTRUCTIONS...........3  
SAFETY PRECAUTIONS .................................5  
How to attach the stand ....................................6  
How to remove the stand ..................................6  
Features............................................................7  
Power source....................................................7  
Contents ...........................................................8  
Parts and functions ...........................................9  
Remote control ...............................................10  
Antenna connections ......................................11  
Cable TV connections.....................................11  
Connections to other equipment.....................12  
TV operation  
Starting setup .................................................15  
TV operation ...................................................15  
Quick guide for menu operation......................16  
Convenience functions ...................................17  
Memorizing channels......................................18  
Checking the digital signal strength ................19  
Labeling channels...........................................19  
Labeling video inputs......................................19  
Setting the V-Chip ...........................................20  
Closed Caption...............................................21  
CC advanced..................................................21  
Setting the picture size....................................22  
Additional information  
Reception disturbances ..................................23  
Troubleshooting ..............................................24  
Specifications ................................................25  
limited WARRANTY ........................................26  
 
8
Parts and functions  
Front  
Illustration is SLED4280 Right side  
HDMI1/DVI IN jack  
FOR SERVICE PERSONNEL USE ONLY  
Do NOT insert ANY USB device into  
this port. Use of this port by other  
than Service Personnel may void this  
products warranty.  
VIDEO 1 IN jacks  
(VIDEO/AUDIO  
(L(MONO)/R))  
Power Indicator  
Red : Standby  
Blue : On  
Remote sensor  
VOL (VOLUME) +/– buttons  
CH (CHANNEL) buttons  
(POWER) button  
INPUT/ENTER button  
MENU button  
/
To display the menu screen :  
Touch MENU button to display the menu screen.  
CH (CHANNEL)  
/
buttons, VOL (VOLUME) +/buttons and INPUT/ENTER button can be used to select the  
desired setting during the menu screen operations.  
To adjust the TV angle :  
You can adjust the TV angle of the TV-screen for 30° from horizontal angle. Hold the base of the TV while adjusting  
the angle.  
PC MONITOR IN jack  
Illustration is SLED4280  
Rear  
COMPONENT  
IN jacks  
PC/DVI AUDIO IN jack  
HDMI2 IN jack  
VIDEO 2 IN jacks  
(VIDEO/AUDIO  
(L(MONO)/R))  
HDMI3 IN jack  
VAR. (VARIABLE)  
AUDIO OUT jacks  
DIGITAL AUDIO  
COAXIAL OUT jack  
RF (ANT.) IN jack  
Service connector cover: Please do not open this cover. There is a socket only for service purpose inside.  
 
9
Remote control  
6.CURSOR ///Buttons - Used to operate  
12  
13  
the menu functions of the LCD TV.  
1
2
7.ENTER Button - Use to enter or select  
information for On-Screen operations.  
8.MUTE Button - To turn off the sound, press this  
button once. The LCD TV will be silenced and  
the symbol “Mute” will appear on the screen. The  
muting feature can be released by pressing the  
MUTE button again or one of the VOL (VOLUME)  
+ or buttons.  
3
4
5
14  
15  
9.VOL (VOLUME) + / Buttons - Press the +  
button to increase, or the button to decrease the  
sound level.  
6
7
16  
17  
8
10.INPUT SELECT Button - Use to change the  
external input.  
11.CCD Button - Used to display the Closed Caption  
9
menu screen.  
10  
11  
12.SLEEP Button - To set the LCD TV to turn off  
after a preset amount of time, use the SLEEP  
button on the remote control.  
13.PICTURE SIZE Button - Used to change the  
1. (POWER) Button - Used to turn the power  
picture size.  
on/off to the LCD TV.  
14.RECALL Button - This button allows you to go  
back to the previous channel selected by just  
pressing the RECALL button. Press this button  
again to return to the channel you were watching.  
2.DISPLAY Button - When you press this button,  
the current information will be displayed on a  
screen. To remove the display from the screen,  
press this button again.  
15.EXIT Button - Press to remove setup menu.  
16.AUDIO Button - Change soundtrack language.  
3.Direct Channel Selection Buttons (0-9) - Allows  
direct access to any channel of the LCD TV.  
17.CH (CHANNEL)  
/
Buttons - To change the  
4.Button -This button is the “–” button used when  
channels of the LCD TV.  
selecting digital channels.  
5.MENU Button - Use to display the On-Screen  
menu function.  
Before using the remote control, batteries must first be installed.  
HOW TO INSTALL BATTERIES  
1. Open the battery compartment cover.  
Use two “AAA” size batteries (supplied). The batteries  
may last approximately one year depending on  
how much the remote control is used. For best  
performance, it is recommended that batteries should  
be replaced on a yearly basis, or when the remote  
operation becomes erratic. Do not mix old and new  
batteries or different types.  
BATTERY PRECAUTIONS  
2. Install two “AAA” batteries (supplied).  
3. Replace the battery compartment cover.  
These precautions should be followed when using  
batteries in this device:  
• Use only the size and type of batteries specified.  
• Be sure to follow the correct polarity when  
installing the batteries as indicated in the battery  
compartment. Reversed batteries may cause  
damage to the device.  
• Do not mix different types of batteries together (e.g.  
Alkaline and Carbon-zinc) or old batteries with fresh  
ones.  
• If the device is not to be used for a long period of  
time, remove the batteries to prevent damage or  
injury from possible battery leakage.  
• Do not try to recharge batteries not intended to be  
recharged; they can overheat and rupture. (Follow  
battery manufacturer’s directions.)  
 
10  
Antenna connections  
If you are using an indoor or outdoor antenna, follow the instructions below that correspond to your  
antenna system. If you are using a Cable TV service, see “Cable TV connections”.  
Combination VHF/UHF Antenna (Single 75 ohm cable)  
Antenna  
Connect the 75 ohm cable from the combination  
VHF/UHF antenna to the antenna jack.  
Jack  
75 ohm  
Coaxial  
Cable  
Cable TV connections  
This TV has an extended tuning range and can tune most cable channels without using a Cable TV  
Converter box. Some cable companies offer “premium pay channels” where the signal is scrambled.  
Descrambling these signals for normal viewing requires the use of a descrambler device which is  
generally provided by the Cable TV company.  
For subscribers to basic Cable TV service  
For basic Cable TV service not requiring a Converter/  
75 ohm  
Descrambler box, connect the 75 ohm Coaxial Cable directly  
Coaxial  
Cable  
Antenna  
Jack  
to the Antenna Jack on the back of the TV.  
For subscribers to scrambled Cable TV service  
If you subscribe to a Cable TV service which requires the use of a Converter/Descrambler box, connect  
the incoming 75 ohm Coaxial Cable to the Converter/Descrambler box. Using another 75 ohm Coaxial  
Cable, connect the output jack of the Converter/Descrambler box to the Antenna Jack on the TV. Follow the  
connections shown below. Set the TV to the output channel of the Converter/Descrambler box (usually channel  
3 or 4) and use the Converter/Descrambler box to select channels.  
Incoming  
75 ohm  
Cable TV  
Cable  
Antenna  
Jack  
75 ohm Cable to TV  
Converter/  
Descrambler  
For premium  
channels  
If you subscribe to a Cable TV service in which basic channels are unscrambled and premium channels require  
the use of a Converter/Descrambler box, you may wish to use a signal Splitter and an A/B Switch box (available  
from the Cable TV company or an electronics supply store). Follow the connections shown below. With the  
switch in the “B” position, you can directly tune any nonscrambled channels on your TV. With the switch in the  
“A” position, tune your TV to the output of the Converter/Descrambler box (usually channel 3 or 4) and use the  
Converter/Descrambler box to tune scrambled channels.  
Incoming  
Converter/  
75 ohm  
Cable TV  
Cable  
Antenna  
Jack  
Descrambler  
75 ohm Cable to TV  
A
A/B Switch  
Splitter  
B
 
11  
Connections to other equipment  
The exact arrangement you use to interconnect various video and audio components to this unit is dependent  
on the model and features of each component. Check the Owner’s Manual provided with each component for  
the location of video and audio inputs and outputs.  
To connect the LCD TV to a VCR  
Right of the unit  
VCR  
To Video/Audio OUT  
To VIDEO/AUDIO IN  
Video/Audio cord (not supplied)  
To connect the LCD TV to a DVD player with Component Video Input  
You can enjoy a high quality picture by connecting the unit’s COMPONENT VIDEO OUT jacks of your DVD  
player with the COMPONENT video cables (not supplied).  
Rear of the unit  
Component video cord  
(not supplied)  
Pb  
Y
Pr  
To COMPONENT IN  
To Component OUT  
Pr  
Y
Pb  
DVD  
To Audio OUT  
To AUDIO IN  
Audio cord  
(not supplied)  
NOTE:  
• Component Video input of the unit are for use with a device which output 480i/1080i interlaced signals and  
480p/720p progressive signals.  
To connect the LCD TV to a camcorder, or a TV Game  
To playback from a camcorder, connect the camcorder to the unit as shown.  
This unit can also be used as a display device for many video games. However, due to the wide variety of  
signals generated by these devices and subsequent hook-up variations required, they have not all been  
included in the suggested connection diagrams.You’ll need to consult each component’s Owner’s Manual for  
additional information.  
Right of the unit  
To VIDEO/AUDIO IN  
Video/Audio cord (not supplied)  
To Video/Audio OUT  
or  
 
12  
Connections to other equipment  
(continued)  
To connect an audio system  
This connection allows you to use an audio amplifier and external speakers, and adjust the audio level using the  
TV’s remote control.  
To control the audio, turn on the TV and the stereo amplifier, and turn off the TV’s built-in speakers (see page 17).  
Rear of the unit  
Amplifier  
To VAR. AUDIO OUT  
To Audio (L) Input  
To Audio (R) Input  
Audio cord (not supplied)  
NOTE:  
To hear sound when using an external audio amplifier, the volume of both the TV and the amplifier must be set  
above 0 (zero).  
• For example, if the volume of the TV is set to 0, you will not be able to hear any sound, even if the volume of the  
amplifier is at its highest level.  
Using an AV Amplifier with built-in digital surround  
If you are using an Amplifier with built-in digital surround sound, you can enjoy various audio systems including  
Dolby Digital Surround audio that sounds just like the movie.  
Connect an AV amplifier with built-in Dolby Digital decoder, etc. as shown below.  
Front  
Speaker  
Rear of the unit  
Subwoofer  
(Right)  
TV  
Front  
Speaker  
(Left)  
To DIGITAL AUDIO  
COAXIAL OUT  
Coaxial digital cable  
(not supplied)  
Center Speaker  
To Coaxial  
Digital Audio IN  
Surround  
Speaker (Left)  
Surround  
Speaker  
(Right)  
AV Amplifier with built-in digital surround  
decoder as listed above  
NOTE:  
• When you are viewing digital broadcast, this unit will not work in conjunction with DTS audio or MPEG audio.  
There will be no sound output if connected to an AV amplifier with a built-in DTS decoder or MPEG decoder.  
 
13  
Connections to other equipment  
(continued)  
To connect the LCD TV to a HDMI or a DVI device to the unit  
The HDMI1/DVI input receives digital audio and uncompressed video from a HDMI device or uncompressed  
digital video from a DVI device.  
When you connect to a DVI device with a HDMI-to-DVI adapter cable, it transfers only video signal. Separate  
analog audio cords required.  
To DVI output  
Right and rear of the unit  
Audio cord (not supplied)  
To PC/DVI  
AUDIO IN  
DVI device  
or  
HDMI device  
To HDMI out  
HDMI - to - DVI adapter cable  
To HDMI IN  
(HDMI type A connector)  
(not supplied)  
HDMI cable (type A connector)  
(not supplied)  
NOTE:  
• When using HDMI1/DVI to connect your HDMI or DVI devices, you must select the corresponding  
audio input source (HDMI or DVI) on the menu screen (see page 17). Otherwise you will only see the  
image with no sound.  
To connect the LCD TV to a PC (Personal Computer)  
Before you connect this TV to your PC, change the adjustment of your PC’s Resolution and  
Refresh rate (60 Hz).  
Connect one end of a (male to male) VGA cable to the video card of the computer and the other end to the VGA  
connector PC MONITOR IN on the rear of the TV. Attach the connectors firmly with the screws on the plug. In case  
of a Multimedia computer, connect the audio cord to the audio output of your Multimedia computer and to the  
AUDIO connector of the PC/DVI AUDIO IN jack of the TV.You can also connect the PC with HDMI cable. If you  
use HDMI cable, you don’t have to connect the audio cord. If you use DVI-to-HDMI cable, please connect audio  
cord as same way as VGA cable.  
Press INPUT SELECT on the remote control to select PC mode.  
Switch on the computer. The TV can operate as the computer monitor.  
Right and rear of the unit  
Monitor Display modes  
MODE Resolution Refresh rate  
VGA  
VGA  
640x480 60/ 72/ 75 Hz  
720x400 70Hz  
SVGA 800x600 56/ 60/ 72/ 75 Hz  
XGA 1024x768 60/ 70/ 75 Hz  
WXGA 1280x768 60Hz  
WXGA 1280x720 60Hz  
WXGA 1360x768 60Hz  
SXGA 1280x1024 60Hz  
WXGA+ 1440x900 60Hz  
To PC  
MONITOR  
IN  
To PC/DVI  
AUDIO IN  
VGA cable (not supplied)  
To HDMI IN  
Audio cord (not supplied)  
HDMI cable (not supplied)  
FHD  
1920x1080 60Hz  
To return to normal mode  
Press INPUT SELECT again.  
NOTE:  
• The on-screen displays will have a different appearance in PC mode than in TV mode.  
• If there is no video signal from the PC when the unit is in PC mode, “No signal” will appear on the TV-screen.  
• When the PC connected to the HDMI terminal and 1920x1080 resolution (FHD) is selected, the top and  
bottom, right and left edges of the picture may be hidden on all PICTURE SIZE. In this case, use the PC  
MONITOR IN jack (VGA cable) is recommended to connect.  
• When the PC’s resolution is set to 1920 x 1080/60 Hz (FHD mode), a signal that differs from the FHD signal,  
which has been confirmed operational on this TV, may appear depending on the PC used. In this case, “Auto  
Adjust” or other Position Adjustment functions may fail to correct the image position.  
To solve this problem, change the PC settings to select another resolution.  
 
14  
Set the Signal Type option to the appropriate  
position (see “Air/Cable selection” on page 18).  
Starting setup  
3
4
The Auto Setup menu appears the first time you  
turn on the TV, and assists you to specify the  
Air/Cable setting, and program your channels  
automatically.  
Press the Direct Channel Selection (0-9, )  
buttons to select the channel.  
(If you press only channel number, channel  
selection will be delayed for a few seconds.)  
TO SELECT ANALOG CHANNELS  
IMPORTANT: Make sure that the antenna or cable  
TV system connection is made!  
1-9:  
Press 1-9 as needed. Example, to select  
channel 2, press 2, then press ENTER.  
Press the 2 digits in order. Example, to  
select channel 12, press 1, 2, then press  
ENTER.  
10-99:  
To turn on the TV, press (POWER) (POWER  
1
indicator on the front of the unit changes blue. It  
may take approx. 10 seconds for a picture to appear  
on screen.).The Auto setup function begins.  
100-135: Press the 3 digits in order. Example, to  
select channel 120, press 1, 2, 0, then press  
ENTER.  
Auto Setup  
TV Location  
Store  
Cable  
Start  
TO SELECT DIGITAL CHANNELS  
Signal Type  
Automatic Search  
Press the first 1-3 digits, then press the button,  
followed by the remaining number.  
This unit has been preset to STORE brightness  
This setting does not qualify under ENERGY  
STAR.To reduce brightness and energy  
consumption, change setting to ‘HOME’. This  
setting does qualify under ENERGY STAR.  
Example, to select channel 15-1, press 1, 5, , 1,  
then press ENTER.  
: Select  
: Adjust  
• If a channel is selected with only audio content,  
“Audio only” will be displayed on the screen.  
• If a channel is selected with a weak digital  
signal, “Digital channel signal strength is low”  
will be displayed on the screen.  
Press or to select “TV Location”, then press  
or to select “Store” or “Home”. This product  
qualifies for ENERGY STAR in Home mode  
default setting.  
2
The same program may be available on either  
an analog channel or a digital channel.You may  
choose to watch either format.  
NOTE:  
• This unit has been preset to STORE brightness.  
This setting does not qualify under ENERGY  
STAR.To reduce brightness and energy  
consumption, change setting to ‘HOME’.This  
setting does qualify under ENERGY STAR.  
• The device may not conform to the ENERGY  
STAR standard after Reset is performed or the  
Backlight is adjusted.  
• If a channel is selected to which you have not  
subscribed, “Digital channel is encrypted” will  
be displayed on the screen.  
VHF/UHF/CABLE CHANNELS  
Air  
Cable  
VHF  
VHF  
2-13  
2-13  
UHF  
STD/HRC/IRC  
(A) (W)  
Press or to select “Signal Type”, then press  
14-69  
14-36  
37-59  
60-85  
86-94  
95-99  
100-135  
01  
3
4
5
(AA) (WW)  
or to select “Cable” or “Air”.  
(AAA) (ZZZ)  
(86) (94)  
(A-5) (A-1)  
(100) (135)  
(4A)  
Press or to select “Automatic Search”, then  
press or ENTER.  
NOTE:  
Now the “Auto Setup” starts. After the auto setup  
is completed, the TV channel appears on the  
screen.  
• If a channel with no broadcast is selected, the  
sound will automatically be muted.  
• It may take a few seconds for a digital channel  
picture to appear on screen after being selected.  
Depending on the reception condition, it may  
take from 15 minutes to 30 minutes to complete  
memorizing digital cable channels. Please be patient.  
To select the video input source  
To view a signal from another device connected to  
your LCD TV, such as a VCR player, press INPUT  
SELECT, then press or or corresponding  
Number buttons (0-7), then press ENTER.You  
can select TV, Video1, Video2, Component, HDMI1,  
HDMI2, HDMI3 or PC depending on which input jacks  
you used to connect your devices.  
NOTE:  
• If you press EXIT in the process of “Auto Setup”,  
the Auto Setup stops and changes to the normal  
screen.  
• When you make a menu selection, your changes  
occur immediately.You do not have to press EXIT to  
see your changes.  
Input Select  
0.TV  
1.Video1  
2.Video2  
3.Component  
4.HDMI1  
5.HDMI2  
6.HDMI3  
7.PC  
TV operation  
To turn on the TV, press (POWER).  
1
(POWER indicator on the front of the unit  
changes blue. It may take approx. 10 seconds for  
a picture to appear on screen.)  
[0-7]:Select  
PCrHess and release CH  
/
/
. The channel automatically  
Adjust the volume level by pressing VOL (VOLUME)  
2
stops at the next channel set into memory.  
For proper operation, before selecting channels, they  
should be set into the memory. See “Memorizing  
channels” on page 18.  
+ or . The volume level will be indicated on  
the screen by blue bars. As the volume level  
increases, so do the number of bars. If the  
volume decreases, the number of blue bars also  
decreases.  
 
15  
DISPLAY  
Quick guide for menu  
operation  
Press DISPLAY to display the current information on  
the screen.  
When the TV receives a digital signal, the digital  
information will appear.  
Call menu and for example: Select Language.  
Sleep Timer  
Off  
English  
62-1 HDTV Moving Picture1  
CH-1 TV-MA  
Digital Air  
Press INPUT SELECT to select TV mode.  
1
No Program Information is available  
Press MENU. The TV menu screen will appear.  
2
Main Menu  
Full  
1080i  
>>  
Picture  
Audio  
Channel  
Lock  
• Channel number  
• Channel label (if preset) Broadcast program name  
• V-Chip rating  
• Sleep timer  
• Program guide  
• Resolution  
• Station name  
Setup  
• Signal type  
• Audio language  
• Picture size  
: Select  
ENTER:Set  
Press or to select “Setup”, then press or  
3
4
ENTER.  
Press or to select “Language”, then press  
When the TV receives an analog signal, the analog  
information will appear.  
or to select the desired language.  
…on the following pages the menu can be called  
Sleep Timer  
Off  
14  
G
Analog Cable  
in the same way as here.  
Press EXIT to return to the normal screen.  
5
Mono  
Full  
NOTE:  
480i  
• If no buttons are pressed for more than about 60  
seconds, the menu screen will return to normal  
operation automatically.  
• Channel number  
• V-Chip rating  
• Channel label (if preset)  
• Signal type  
• Sleep timer  
• Picture size  
• Audio information  
• Resolution  
(Stereo, SAP or Mono)  
Press DISPLAY again to clear the call display.  
NOTE:  
• After a few seconds, DISPLAY screen will return to  
normal TV-operation automatically.  
RECALL  
This button allows you to go back to the last channel  
selected by pressing RECALL. Press RECALL again to  
return to the last channel you were watching.  
MUTE  
Press MUTE to switch off the sound. The TV’s sound  
will be silenced and “Mute” will appear on the screen.  
The sound can be switched back on by pressing this  
button again or the VOL (VOLUME) + or .  
SLEEP  
To set the TV to turn off after a preset amount of time,  
press SLEEP on the remote control. The clock will  
count up 10 minutes for each press of the SLEEP but-  
ton (Off, 0h 10m, 0h 20m, ..., 2h 0m). After the sleep  
time is programmed, the display will appear briefly  
every ten minutes to remind you that the sleep timer  
is operating. To confirm the sleep timer setting, press  
SLEEP and the remaining time will be displayed for a  
few seconds. To cancel the sleep timer, press SLEEP  
repeatedly until the display turns to Off.  
 
16  
Convenience functions  
You can change the default settings by pressing the MENU button on your remote, then select one of the icons  
at the left of the menu - follow the On-Screen prompts to set your preferences.  
Icon  
Picture Picture  
Selected Items  
Setup hint  
Brightness / Contrast You can adjust the picture quality to your preference.  
Setting  
/ Sharpness / Color  
/ Tint  
Color Temperature Bluish (Cool) / Neutral (Standard) / Reddish (Warm)  
2
Backlight  
*
The Backlight feature adjusts the screen brightness for improved picture clarity.  
DBC  
On / Off  
Use this feature to change the Black level automatically according to the  
brightness of an image.The Black level will become dark in a dark scene.  
Picture  
Sports  
Standard  
Movie  
Memory  
Bright and dynamic picture (factory-set)  
Standard picture quality (factory-set)  
Movie-like picture setting (factory-set)  
Your personal preferences (set by you; see “Picture Setting”)  
See page 22.  
Preference  
Picture Size  
Film Mode  
On/Off  
A smoother motion may be obtained by setting the Film Mode to “On” when  
you view a DVD from the DVD player connected with the component or  
HDMI input (480i only).  
PC Setting  
Hor Position /  
Ver Position  
To adjust the horizontal / vertical position of the image on the PC Monitor  
screen. Each video standard will require a different value for this setting.  
Clock  
Phase  
Auto Adjust  
On/Off  
To minimize any vertical bars or stripes visible on the screen background.  
This must be adjusted after the frequency has been set optimize picture quality.  
To adjust the all PC settings automatically.  
DNR (Digital Noise Reduction) can reduce the roughness of the picture.  
A smoother motion may be obtained by setting the Motion 120Hz to On.  
You can adjust the sound quality to your preference.  
DNR  
Motion 120Hz On/Off  
Bass / Treble / Balance  
Audio  
MTS  
Stereo / SAP /  
The multi-channel TV sound (MTS) feature provides high-fidelity stereo  
sound. MTS also can transmit a second audio program (SAP) containing a  
second language or other audio information.  
Mono  
When the TV receives a stereo or SAP broadcast, the word “Stereo” or  
“SAP” displays on-screen every time you press DISPLAY.  
Audio Language  
When two or more audio languages are included in a digital signal, you can  
select an audio language. (This function is available only for digital broadcast.)  
HDMI1 Audio HDMI  
DVI  
When you connect the HDMI device to the TV, select this setting.  
When you connect the DVI device to the TV with analog audio cords, select this setting.  
Use this feature to turn the TV speakers off when you connect an audio system.  
Speakers  
On/Off  
Channel Add / Delete  
DTV Signal  
See page 18.  
See page 19.  
See page 18.  
See page 19.  
See page 20.  
See page 21.  
Auto Ch Memory  
Ch Label  
Lock  
Setup  
Closed Caption  
Language  
You can choose from three different languages (English, Français (French) and  
Español (Spanish)) for the on-screen displays.  
Select the language you prefer first, then proceed with the other menu options.  
Video Label  
On Timer  
See page 19.  
Off / 0h30m /  
You can set On Timer to automatically turn on the TV. To cancel the On  
1h00m / 1h30m  
/ 2h00m /  
Timer, set to “Off”.  
3h00m⋅⋅⋅12h00m  
On/Off  
Auto Shut  
Off*1  
If the Auto Shut Off feature is On, a station being viewed stops broadcasting and  
the TV is not operated, the TV will automatically shut itself off after 15 minutes.  
Auto Setup  
Power On LED On/Off  
See page 15.  
When you turn on the TV, Power indicator on the front of the TV will light.You can  
select On or Off.  
Reset*2  
The Reset function returns your Picture/Audio settings to the factory settings.  
“Picture Setting”, “DBC”, “Picture Preference”, “Film Mode”, “PC Setting”,  
“DNR”, “Motion 120Hz”, “Bass”, “Treble” and “Balance” can be reset by this  
function.  
NOTE:  
1
*
*
If there is no input signal in the HDMI or PC mode, after 1 minute Auto Shut Off will be activated.  
2
The device may not conform to the Energy Star standard after Reset is performed or the Backlight is adjusted.  
 
17  
The TV will begin memorizing all the channels  
available in your area.  
Memorizing channels  
4
• It may take from 15 minutes to 30 minutes to  
complete memorizing digital cable channels.  
Depending on the reception condition, a bar  
display may not advance for several minutes,  
please be patient.  
This TV is equipped with a channel memory  
feature which allows channels to skip up or down  
to the next channel set into memory, skipping  
over unwanted channels. Before selecting  
channels, they must be programmed into the  
TV’s memory. To use this TV with an antenna, set  
the Signal Type option to the Air mode. When  
shipped from the factory, this menu option is in  
the Cable mode.  
NOTE:  
Memorizing channels is best accomplished during  
evening “PRIMETIME” hours, as more stations are  
broadcasting digital signals. Memorizing channels can  
only be accomplished while a station is broadcasting  
a digital signal to set that channel into memory.  
Air/Cable selection  
• If you are unsure of the digital channels available  
receive a list based on your address or zip code.  
Should you require further assistance you may call  
our toll-free customer service line at 1-800-289-0980.  
• New digital channels may be added to your area  
periodically, it is recommended to perform the  
“Automatic Search” procedure regularly.  
Select “Channel”, then press or ENTER.  
1
Press or to select “Auto Ch Memory”, then  
2
press or ENTER.  
Press or to select “Signal Type”.  
3
Press or to select “Air” or “Cable”.  
4
Air - VHF/UHF channels  
Adding Channel  
Cable - CABLE TV channels  
If you find a new digital channel unregistered, you can  
add the new channel into the channel memory.  
Auto Ch Memory  
Signal Type  
Cable  
Start  
Automatic Search  
Tune in the new channel.  
1
Select “Channel”, then press or ENTER.  
2
: Select  
: Adjust  
Press or to select “Add/Delete”, then press ▶  
3
or ENTER.  
CABLE CHART  
Add/Delete  
The chart below is typical of many cable system  
channel allocations.  
Adding Channel  
Add/Delete  
Clear All  
>>  
>>  
>>  
: Select  
ENTER:Set  
Press or to select “Adding Channel”, then  
press or ENTER. The new channel will be  
added into the channel memory.  
4
Add/Delete channel  
NOTE:  
You can select the channel that you want to skip.  
• It may take a few seconds for a digital channel  
picture to appear on screen after being selected.  
Select “Channel”, then press or ENTER.  
1
Press or to select “Add/Delete”, then press  
2
Automatic Search  
or ENTER.  
Select “Channel”, then press or ENTER.  
1
Press or to select “Add/Delete”, then press  
3
4
or ENTER.  
Press or to select “Auto Ch Memory”, then  
2
press or ENTER.  
Press or to select the channel that you want  
to skip.  
Add/Delete  
Press or to select “Automatic Search”, then  
3
press or ENTER.  
CH  
Signal  
Analog  
Analog  
Digital  
Digital  
Analog  
Auto Ch Memory  
2
3
Add  
Add  
Signal Type  
Cable  
Stop  
3-1  
3-2  
4
Delete  
Add  
Automatic Search  
Delete  
Analog Channel Found : 7  
Digital Channel Found : 5  
: Select  
: Adjust  
Programming Now  
: Select  
ENTER:Cancel  
Press or to select “Add” or “Delete”,  
5
6
whichever function you want to perform.  
Repeat steps 4 - 5 for other channels you want to  
add or delete.  
 
18  
Ch Label  
Clear All  
Channel Number  
15-1  
>>  
Ch Label  
All channels are deleted from the channel memory.  
Label Clear  
Select “Channel”, then press or ENTER.  
1
: Select  
: Adjust  
Press or to select “Add/Delete”, then press ▶  
2
or ENTER.  
Press or repeatedly until the character you  
4
want appears in the first space.  
Press or to select “Clear All”, then press or  
3
ENTER.  
Ch Label  
Channel Number  
15-1  
A
Add/Delete  
Ch Label  
Adding Channel  
Add/Delete  
Clear All  
>>  
>>  
>>  
Label Clear  
>>  
: Select  
: Adjust ENTER:Set  
: Select  
ENTER:Set  
The characters rotation as follows:  
, () @ / + =  
-
-
Checking the digital  
signal strength  
SPACE  
If the character which you desire appears, press  
ENTER.  
This TV will allow you to view the digital signal  
meter for digital channels.  
Repeat this step to enter the rest of the characters.  
If you would like a blank space in the label name,  
you must choose the empty space from the list of  
characters.  
Select “Channel”, then press or ENTER.  
1
Press or to select “DTV Signal”.  
2
Repeat steps 3-4 for other channel.You can  
assign a label to each channel.  
5
6
Press or ENTER to check the digital signal  
3
When you finish inputting the label name, press  
strength.  
EXIT to return to the normal screen.  
The digital signal strength screen will appear.  
If necessary, adjust the direction of the antenna to  
To clear a Ch Label  
obtain the maximum signal strength.  
After step 3 above, press or to select “Label  
Clear”, then press or ENTER.  
DTV Signal  
NOTE:  
• The channel labels will be reset after “Automatic  
Search” on page 18.  
50  
100  
Signal Level 0  
NOTE:  
Labeling video inputs  
• Signal meter feature is not available for analog  
channels.  
The Video Label feature allows you to label each  
input source for your TV.  
• After 240 seconds, DTV Signal screen will return to  
normal TV-operation automatically.  
Select “Setup”, then press or ENTER.  
1
Press or to select “Video Label”, then press  
2
Labeling channels  
or ENTER.  
Channel label appear with the channel number  
display each time you turn on the TV, select a  
channel, or press DISPLAY.  
Press or to select an input which you want to  
3
label.  
Press or to select the desired label for that  
4
You can choose any four characters to identify a  
channel.  
input source.  
Video Label  
Video1  
-
-
-
-
-
-
To create channel labels  
Video2  
Component  
HDMI1  
Select “Channel”, then press or ENTER.  
1
HDMI2  
HDMI3  
Press or to select “Ch Label”, then press ▶  
2
: Select  
: Adjust  
or ENTER.  
: Uses the default label name  
:Video cassette recorder  
: DVD video  
The Ch Label menu will appear.  
VCR  
DVD  
DTV  
SAT  
CBL  
HD  
Press or to select a channel you want to  
3
: Digital TV set-top box  
: Satellite box  
label, then press .  
: Cable box  
: HDMI device (only for HDMI inputs)  
 
19  
Genre:  
Setting the V-Chip  
ALL  
D
: All  
: Dialogue  
: Language  
: Sex  
An age limitation can be set to restrict children from  
viewing or hearing violent scenes or pictures that you  
may choose to exclude. The restriction applies to “TV  
Rating” and “Movie Rating” if this data is transmitted.  
You may set this restriction separately. To use the  
V-Chip function, you must register a password.  
L
S
V
:Violence  
: Fantasy Violence  
FV  
Movie Rating  
Movie Rating  
To register a password  
G
PG  
PG-13  
R
Select “Lock”, then press or ENTER.  
1
NC-17  
X
Select and enter your password (4 digits) using  
2
: Select  
ENTER:Set  
Number buttons (0-9), then press ENTER.  
G
: All ages  
Lock  
_
New Password  
* * *  
PG  
: Parental guidance  
PG-13 : Parental guidance less than 13 years old  
R
: Under 17 years old parental guidance  
suggested  
NC-17 : 17 years old and above  
[0-9] : Select  
ENTER:Set  
X
: Adult only  
” appears instead of the number.  
Press ///to select the desired rating, then  
6
7
Enter the same password again to confirm, then  
press ENTER.  
3
press ENTER.  
The password is now registered.  
Press EXIT to return to the normal screen.  
V-Chip function is activated now.  
NOTE:  
• If you forget the password, contact Customer  
Service at 1-800-289-0980 for assistance.  
Your original remote control will be required.  
To avoid forgetting the password, write it down and  
keep in a safe place.  
To use the TV after the TV is protected.  
When a program is received that is blocked by the  
V-Chip, press MUTE, then enter your password.  
The protection will be temporarily overridden. If the  
TV is turned off or the channel is changed, the V-Chip  
restriction will be reactivated.  
To set the V-Chip  
NOTE:  
• The V-Chip function is activated only on programs  
and input sources that include a rating signal.  
Select “Lock”, then press or ENTER.  
1
Use Number buttons (0-9) to enter your  
2
To change the password  
password, then press ENTER. The Lock menu  
will appear.  
Select “Lock”, then press or ENTER.  
1
Press or to set “V-Chip” to “On”.  
3
Use Number buttons (0-9) to enter your password,  
2
then press ENTER. The Lock menu will appear.  
Press or to select “V-Chip Set”, then press  
4
or ENTER.  
Press or to select “Change Password”, then  
3
The V-Chip Set menu appears.  
press or ENTER.  
The Change Password screen will appear.  
Press or to select which rating will be used,  
5
then press or ENTER. Each rating below will  
Enter a new password using Number buttons  
4
5
appear.  
(0-9), then press ENTER.  
TV Rating  
Enter the same password again to confirm, then  
TV Rating  
ALL  
D
L
S
V
FV  
press ENTER.  
TV-Y  
The password is now registered.  
TV-Y7  
TV-G  
TV-PG  
TV-14  
TV-MA  
Downloading the additional V-Chip rating system  
As a supplement to the standard V-Chip rating  
system, your television will be able to download an  
additional rating system, if such a system becomes  
available in the future.  
: Select  
ENTER:Set  
You can set the rating using age level and genre.  
Age:  
TV-Y  
: All children  
To download the additional V-Chip rating system  
(when available)  
TV-Y7 : 7 years old and above  
TV-G  
: General audience  
TV-PG : Parental guidance  
Select “Lock”, then press or ENTER.  
1
TV-14 : 14 years old and above  
TV-MA : 17 years old and above  
Use Number buttons (0-9) to enter your password,  
2
then press ENTER.The Lock menu will appear.  
 
20  
Press or to set “V-Chip” to “On”.  
Press or to set “CC Setting” to “On”.  
3
4
3
4
On: Captions will be displayed on the screen.  
Off: Captions will not be displayed on the screen.  
Press or to select “V-Chip Set (DTV)”, then  
press or ENTER.  
Press or to select “Analog Caption” or “Digital  
If the TV is not storing the additional rating  
system, the TV will begin downloading it, which  
may take some time to be completed.  
5
Caption”.  
When you select “Analog Caption”, you can  
choose from C1, C2, C3, C4, T1, T2, T3 and T4.  
Set your preferred content rating limits for the  
6
7
additional rating system.  
When you select “Digital Caption”, you can  
choose from CS1, CS2, CS3, CS4, CS5 and CS6.  
You also need “Update” procedure to update  
rating information.  
Press or to select the desired Closed  
5
6
Caption mode for both Digital and Analog Caption.  
NOTE:  
You can only download the additional V-Chip rating  
system when your TV is receiving a digital signal.  
• When you download the additional rating system, it  
may take some time for the download to occur.  
• The V-Chip rating information and system are not  
determined or controlled by the TV.  
Press or to select “CC Priority”, then press  
or to select “Digital CC” or “Analog CC”.  
NOTE:  
• Depending on the broadcast signal, some  
Analog Captions will function with a Digital  
broadcast signal. This step prevent that two  
kind of captions are overlapping.  
• The standard V-Chip rating system is available  
whether your TV is receiving a digital signal or not,  
and will block both analog and digital programs. To  
set the restriction level using the standard V-Chip  
rating system, select V-Chip Set in step 4.  
• The downloadable V-Chip rating system is an  
evolving technology, and availability, content, and  
format may vary.  
NOTE:  
• If the program or video you selected is not closed-  
captioned, no captions will display on-screen.  
• If text is not available in your viewing area, a black  
rectangle may appear on-screen. If this happens,  
set the CC Setting to “Off”.  
You cannot select this feature if the TV is not  
receiving a digital signal for the current station.  
• When selecting Closed Captions, the captioning will  
be delayed approx. 10 seconds.  
If no caption signal is received, no captions will appear,  
but the television will remain in the Caption mode.  
To clear the all V-Chip settings  
• Misspellings or unusual characters may  
Select “Lock”, then press or ENTER.  
1
occasionally appear during Closed Captioning.  
This is normal with Closed Captioning, especially  
with live programs. This is because during live  
programs, captions are also entered live. These  
transmissions do not allow time for editing.  
• When Captions are being displayed, on-screen  
displays, such as volume and mute may be seen  
but may interfere with Closed Captions.  
Use Number buttons (0-9) to enter your password,  
2
then press ENTER. The Lock menu will appear.  
Press or to select “V-Chip Clear”, then press  
3
or ENTER.  
The V-Chip Clear screen will appear.  
Use Number buttons (0-9) to enter your  
4
• Some cable systems and copy protection systems  
may interfere with the Closed Captioned signal.  
• If using an indoor antenna or if TV reception is  
very poor, the Closed Caption Decoder may not  
appear or may appear with strange characters or  
misspelled words. In this case, adjust the antenna  
for better reception or use an outdoor antenna.  
• Closed Caption menu also can be displayed by  
pressing CCD on the remote control.  
password, then press ENTER. All of your settings  
return to the factory settings.  
Closed Caption  
WHAT IS CLOSED CAPTIONING?  
This television has the capability to decode and  
display Closed Captioned television programs.  
Closed Captioning will display text on the screen  
for hearing impaired viewers or it will translate and  
display text in another language.  
CC advanced  
When you have selected Custom as the display  
method, you can adjust the various setting listed  
below as follows:  
Captions: This Closed Caption mode will display  
text on the screen in English or another language.  
Generally, Closed Captions in English are transmitted  
on C1 and Closed Captions in other languages are  
transmitted on C2.  
This feature is designed to customize Digital Captions  
only.  
Text: The Text Closed Caption mode will usually fill  
1/2 of the screen with a programming schedule or  
other information.  
Select “Setup”, then press or ENTER.  
1
Press or to select “Closed Caption”, then  
2
press or ENTER.  
Select “Setup”, then press or ENTER.  
1
The Closed Caption menu will appear.  
Press or to select “Closed Caption”, then  
2
Press or to set “CC Setting” to “On”.  
3
press or ENTER.  
The Closed Caption menu will appear.  
Press or to select “Digital CC Preset”, then  
4
 
press or to select “Custom”.  
21  
Press or to select “CC Advanced”, then  
press or ENTER.  
5
6
The CC Advanced menu will appear.  
Press or to select the desired item, then  
press or to change the setting.  
Cinema Wide1 (for 4:3 format programs)  
To fill the screen, the right and left edges are  
extended, however; the center of the picture remains  
near its former ratio.  
CC Advanced  
Text Size  
Auto  
Auto  
Auto  
Auto  
Auto  
Auto  
Auto  
Text Type  
Text Edge  
Text Color  
Text Opacity  
Background Color  
Background Opacity  
The top and bottom edges of the picture may be hidden.  
: Adjust  
: Select  
You can select from among the following items  
and parameters.  
Text Size:  
Text Type:  
Auto, Small, Standard, Large  
Cinema Wide2 (for letter box programs)  
The entire picture is uniformly enlarged—it is  
stretched the same amount both wider and taller  
(retains its original proportion).  
Auto, Style1, Style2, Style3, Style4,  
Style5, Style6, Style7  
Text Edge: Auto, None, Raised, Depressed,  
Uniform, Left Shadow, Right  
Shadow  
The top and bottom edges of the picture may be hidden.  
Text Color: Auto, Black, White, Red, Green,  
Blue, Yellow, Magenta, Cyan  
Text Opacity: Auto, Solid, Transparent,  
Translucent, Flashing  
Background Auto, Black, White, Red, Green,  
Color:  
Blue, Yellow, Magenta, Cyan  
Cinema Wide3 (for letter box programs with  
subtitles)  
Background Auto, Solid, Transparent,  
Opacity: Translucent, Flashing  
To fill the width of the screen, it is extended  
horizontally. However; it is only slightly extended at the  
top and the bottom.  
NOTE:  
You cannot set both “Text Color” and “Background  
Color” as a same color.  
The top and bottom edges of the picture may be hidden.  
You cannot set both “Text Opacity” and “Background  
Opacity” to “Transparent”.  
A B C D E F G - - - - - - - - - - - - - - - -  
A B C D E F G - - - - - - - - - - - - - - - - - - - - - - - - - -  
Setting the picture size  
Full (for 16:9 source programs)  
Full will display the picture at the maximum size.  
You can view 480i and 480p format programs in a  
variety of picture sizes— Natural, Cinema Wide1,  
Cinema Wide2, Cinema Wide3, Full and Native.  
Selecting the picture size  
Select “Picture”, then press or ENTER.  
1
Native (for PC mode only)  
Detects the resolution of the signal of the image and it  
will be shown on the screen with same amount of pixels.  
Press or to select “Picture Size”, then press  
2
or ENTER to display Picture Size menu. Press  
or or corresponding Number buttons (0-4) to  
select the desired picture size, as described below.  
Picture Size  
0.Natural  
1.Cinema Wide1  
2.Cinema Wide2  
3.Cinema Wide3  
4.Full  
NOTE:  
• Some High Definition and/or Digital broadcasts may  
not allow you to change the picture size.  
• In HDMI or COMPONENT mode with a scanning  
rate of 720p, 1080i or 1080p (HDMI only) only the  
Cinema Wide2 and Full picture size feature are  
available.  
[0-4]:Select  
NOTE:  
• Selectable picture sizes may vary depending on the  
input source or broadcast signal.  
• In PC mode, only the Natural, Full and Native  
picture size features are available. In PC mode  
(WXGA, WXGA+, FHD), only the Full and Native  
picture size features are available.  
• Picture Size menu also can be displayed by  
pressing PICTURE SIZE on the remote control.  
• When the PC connected to the HDMI terminal and  
1920x1080 resolution (FHD) is selected, the top  
and bottom, right and left edges of the picture may  
Natural  
In some cases, this image will display the size of  
standard 4:3 with a black side bar.  
 
be hidden on all PICTURE SIZE.  
22  
Reception disturbances  
Most types of television interference can be remedied by adjusting the height and position of the VHF/  
UHF antenna. Outdoor antennas are recommended for best results. The most common types of television  
interference are shown below. If one of these symptoms appear when the TV is connected to a Cable TV  
system, the disturbance may be caused by the local Cable TV company broadcast.  
IGNITION  
Black spots or horizontal streaks may appear, the picture may flutter or  
drift. Usually caused by interference from automobile ignition systems,  
neon lamps or AC powered tools and appliances such as drills or hair  
dryers.  
GHOSTS  
Ghosts are caused by the television signal following two paths. One is the  
direct path and the other is reflected by tall buildings, hills or other large  
objects. Changing the direction or position of the antenna may improve  
the reception.  
SNOW  
If the TV is located far from the TV station, in a fringe reception area where  
the signal is weak, small dots may appear in the picture.  
If the signal is extremely weak, the installation of a larger external antenna  
may be necessary.  
RADIO FREQUENCY INTERFERENCE (RFI)  
Caused by two-way radios, this type of interference produces moving  
ripples or diagonal streaks in the picture. Some cases may cause a loss of  
contrast in the picture. Changing the direction and position of the antenna  
or installing an RFI filter may improve the picture.  
PICTURE SIZE VARIATION  
A slight picture size variation is normal when you adjust the CONTRAST or  
BRIGHTNESS settings.  
CARE AND MAINTENANCE  
To prevent fire or shock hazard, disconnect the TV from the power source before cleaning.  
The finish on the cabinet may be cleaned with mild soap and a soft, damp cloth and cared for as other furniture.  
Use caution when cleaning or wiping the plastic parts.  
 
23  
Troubleshooting  
Use the following checklist for troubleshooting if you have problems with your LCD TV. Consult your local dealer  
or service outlet if problems persist. Be sure all connections are properly made when using with other units.  
SYMPTOMS  
POSSIBLE SOLUTIONS  
SYMPTOMS  
POSSIBLE SOLUTIONS  
Digital  
• Make sure the power cord is plugged in.  
broadcasting  
screen  
Try another AC outlet.  
• Check digital signal strength.  
TV does not  
operate.  
• Power is off, check fuse or circuit breaker.  
• Unplug unit for an hour, then plug it back  
in.  
problem.  
• Check all Cable TV connections.  
• Set Signal Type menu option to the  
Cable mode.  
• Station or Cable TV experiencing  
problems, tune to another station.  
• Check sound adjustments (VOL +/– or  
MUTE).  
No CATV  
reception.  
• Station or Cable TV system problems,  
Poor sound  
or no sound.  
try another station.  
• Check for sources of possible  
interference.  
• Check antenna connections, adjust or  
re-direct antenna.  
Horizontal or  
diagonal bars  
on screen.  
• Check for sources of possible  
interference.  
• Station or Cable TV experiencing  
problems, tune to another station.  
• Make sure channels are set into memory.  
• Make sure Signal Type option is in the  
No reception  
above  
Poor picture • Check antenna or Cable TV  
appropriate mode.  
or no picture.  
connections, adjust antenna.  
• Check for sources of possible  
interference.  
• If using antenna, check UHF antenna  
connections.  
channel 13.  
• Batteries are weak, dead or inserted  
• Check picture control adjustments.  
incorrectly.  
• Station or Cable TV experiencing  
problems, tune to another station.  
• Make sure channels are set into memory.  
• Station is weak, adjust antenna to  
receive desired station.  
• Remote is out of range, move closer to  
TV (within 15 feet).  
No Remote  
operation.  
Poor  
• Make sure Remote is aimed at sensor.  
• Confirm there are no obstructions  
between the Remote and the TV.  
• Make sure the power cord is plugged in.  
reception on  
some  
channels.  
• Check for sources of possible  
interference.  
• Sleep Timer is set.  
TV shuts off.  
• Station or Cable TV experiencing  
problems, tune to another station.  
• Make sure channels are set into memory.  
• Power interrupted.  
• TV station experiencing problems or  
program tuned is not closed captioned.  
Try another channel.  
Poor color or • Check picture control adjustments.  
Closed  
no color.  
• Check antenna or Cable TV  
connections, adjust antenna.  
• Check for sources of possible  
interference.  
Caption is not  
activated.  
• Check Cable TV connection or VHF/UHF  
antenna, reposition or rotate antenna.  
• Set closed caption decoder in the menu.  
TV is not  
• Station or Cable TV experiencing  
problems, tune to another station.  
• Make sure channels are set into memory.  
• Cable TV company is scrambling signal.  
• Adjust antenna.  
• Select proper language in the menu  
options.  
shown in your  
language.  
Picture  
wobbles or  
drifts.  
BLOCK NOISE / PICTURE FREEZE  
Block noise or picture freeze may appear on the screen caused by weak signals, interference from automobile  
ignition systems, neon lamps or AC powered tools and appliances such as drills or hair dryers.  
FOR CUSTOMER SERVICE, ADDITIONAL SET-UP AND OPERATING ASSISTANCE, OR TO ORDER ACCESSORIES PLEASE CALL:  
1-800-289-0980  
WHEN CALLING CUSTOMER SERVICE PLEASE HAVE YOUR MODEL NUMBER READY  
OR WRITE TO:  
ORION SALES, INC.  
3471 N. UNION DR.  
OLNEY, ILLINOIS 62450  
FOR INFORMATION ON OUR OTHER PRODUCTS, OR TO ORDER ACCESSORIES ONLINE, PLEASE VISIT OUR WEBSITE AT  
 
24  
Specifications  
SLED4280  
SLED4680  
GENERAL  
Power supply:  
Power consumption:  
AC 120V 60Hz  
Operation: 135 W  
Standby: 0.3 W  
15.8 kg (34.8 lbs)  
Width: 1013 mm (39-7/8 inches)  
Height: 679.5 mm (26-3/4 inches)  
Depth: 255 mm (10-1/16 inches)  
Operation: 152 W  
18 kg (39.7 lbs)  
Width: 1117 mm (43-15/16 inches)  
Height: 748 mm (29-7/16 inches)  
Depth: 255 mm (10-1/16 inches)  
Weight:  
Dimensions:  
Operating temperature:  
Operating humidity:  
Type:  
Display method:  
Number of Pixels:  
Broadcasting system:  
5˚C - 40˚C  
Less than 80% RH  
106.73 cm (42" class/42.02" diagonal)  
Transmission TFT color LCD panel  
1920 (H) x 1080 (V)  
116.81 cm (46" class/45.99" diagonal)  
US system M  
ATSC standard (8VSB), QAM  
Receiving channels:  
VHF  
2-13  
UHF  
14-69  
CATV 14-36 (A)-(W)  
37-59 (AA)-(WW)  
60-85 (AAA)-(ZZZ)  
86-94 (86)-(94)  
95-99 (A-5)-(A-1)  
100-135 (100)-(135)  
01 (4A)  
Tuner type:  
Inputs:  
Frequency synthesized  
Video: (RCA) 1 V (p-p), 75 ohms  
Audio:  
(RCA) –8 dBm/50k ohms  
Component video:  
(Y) 1 V (p-p), 75 ohms  
(Pb)/(Pr) 0.7 V (p-p), 75 ohms  
HDMI: HDMI compliant (type A connector)  
HDCP compliant  
E-EDID compliant  
Suggested scan rates: 480p, 480i, 720p,1080i,1080p  
HDMI Audio: 2-channel PCM  
32/44.1/48 kHz sampling frequency  
16/20/24 bits per sample  
PC Monitor: Mini-Dsub 15pin x 1  
Antenna:  
VHF/UHF In 75 ohms coaxial  
Outputs:  
Digital audio out:  
0.5 V(p-p), 75 ohms terminated  
Audio: 0-600 mV rms / 1k ohm  
Speaker:  
Woofer:  
Audio output power:  
ACCESSORIES  
20.3 mm x 149.9 mm (13/16 inches x 5-7/8 inches), 8 ohms x 2  
109.2 mm x 137.2 mm (4-5/16 inches x 5-3/8 inches), 4 ohms x 1  
10W + 10W + 15W  
Remote control  
Batteries AAA x 2  
Stand  
Screws x 4  
Designs and specifications are subject to change without notice.  
 
25  
limited  
WARRANTY  
42/46” CLASS WIDE LED TV  
ORION warrants this product to be free from manufacturing defects in material and workmanship under  
normal use and conditions for a period of 1 year from date of original purchase in the United States.  
Should service be necessary under this warranty for any reason due to a manufacturing defect or  
malfunction during the first 12 months from date of original purchase, ORION will provide in-home repair  
service by an ORION authorized Independent Service Center at no charge. Also, if an original part fails due to  
manufacturing defect in material and workmanship within one year from date of original purchase we will replace  
the defective part, provided the defect or malfunction is verified along with dated proof of purchase.  
There are ORION authorized Independent Service Centers located throughout the country. For the one  
be liable for damages incurred in shipment of the unit. If there are no ORION authorized Independent Service  
Centers in your area please call - 1-888-296-7466 for assistance.  
Note: This warranty is void if the product is:  
(a) Damaged through negligence, misuse, abuse, or accident.  
(b) Used in a commercial application or rentals.  
(c) Modified or repaired by anyone other than an Independent Service Center authorized by ORION to effect  
warranty repairs to the class of product or by the ORION Factory Service Center.  
(d) Damaged because it is improperly connected to the equipment of other manufacturers.  
This warranty does not cover:  
(a) Damage to equipment not properly connected to the product.  
(b) Costs incurred in the shipping of the product to an ORION authorized Independent Service Center or  
ORION Factory Service Center.  
(c) Damage or improper operation of unit caused by customer abuse, misuse, negligence, or failure to follow  
operating instructions provided with the product.  
(d) Ordinary adjustments to the product which can be performed by customer as outlined in the owner’s  
manual.  
(e) Signal reception problems caused by external antenna or cable systems.  
THIS WARRANTY IS NON TRANSFERABLE AND APPLIES ONLY TO THE ORIGINAL PURCHASER  
AND DOES NOT EXTEND TO SUBSEQUENT OWNERS OF THE PRODUCT. ANY APPLICABLE IMPLIED  
WARRANTIES, INCLUDING THE WARRANTY OF MERCHANTABILITY, ARE LIMITED IN DURATION TO A  
PERIOD OF THE EXPRESS WARRANTY AS PROVIDED HEREIN BEGINNING WITH THE DATE OF ORIGINAL  
PURCHASE AT RETAIL AND NO WARRANTIES, WHETHER EXPRESS OR IMPLIED SHALL APPLY TO THIS  
PRODUCT THEREAFTER. ORION MAKES NO WARRANTY AS TO THE FITNESS OF THE PRODUCT FOR  
ANY PARTICULAR PURPOSE AND USE.  
UNDER NO CIRCUMSTANCES SHALL ORION BE LIABLE FOR ANY LOSS, DIRECT, INDIRECT,  
INCIDENTAL, SPECIAL, OR CONSEQUENTIAL DAMAGE ARISING OUT OF OR IN CONNECTION WITH THE  
USE OF THIS PRODUCT.  
THIS WARRANTY IS VALID ONLY IN THE UNITED STATES OF AMERICA. THIS WARRANTY GIVES YOU  
SPECIFIC LEGAL RIGHTS, HOWEVER, YOU MAY HAVE OTHER RIGHTS WHICH MAY VARY FROM STATE  
TO STATE. SOME STATES DO NOT ALLOW LIMITATION ON IMPLIED WARRANTIES OR EXCLUSION OF  
CONSEQUENTIAL DAMAGE, THEREFORE THESE RESTRICTIONS MAY NOT APPLY TO YOU.  
ORION SALES, INC.  
3471 N. UNION DR.  
OLNEY, ILLINOIS 62450  
 
26  
Memo  
..................................................................................................  
..................................................................................................  
..................................................................................................  
..................................................................................................  
..................................................................................................  
..................................................................................................  
..................................................................................................  
..................................................................................................  
..................................................................................................  
..................................................................................................  
..................................................................................................  
..................................................................................................  
..................................................................................................  
..................................................................................................  
..................................................................................................  
..................................................................................................  
..................................................................................................  
..................................................................................................  
..................................................................................................  
..................................................................................................  
..................................................................................................  
..................................................................................................  
..................................................................................................  
..................................................................................................  
..................................................................................................  
..................................................................................................  
..................................................................................................  
..................................................................................................  
..................................................................................................  
..................................................................................................  
..................................................................................................  
..................................................................................................  
..................................................................................................  
..................................................................................................  
 

Quantum Mobility Aid 6000Z User Guide
RCA Flat Panel Television HDLP61W151 User Guide
RCA MP3 Player M4202 User Guide
Remington Power Tools Car Speaker DPS 1 111409 01 User Guide
Rockford Fosgate Car Amplifier T10001 BD User Guide
Ryobi Chainsaw P514 User Guide
Ryobi Trimmer 767r User Guide
Samsung Microwave Oven SMH5165 User Guide
Sanyo Vacuum Cleaner SC B550 User Guide
Schneider Electric Marine Radio VW3 A3 303 User Guide