Philips Home Security System M100 User Manual

Always there to help you  
Register your product and get support at  
M100  
Question?  
Contact  
Philips  
Wireless Home Monitor  
User manual  
 
Contents  
1 Important  
Safety  
2
2
2
Notice  
2 Your wireless home monitor  
What's in the box  
4
4
4
Product overview  
3 Placement  
5
4 Set-up  
6
6
6
Connect Monitor to Wi-Fi network  
Use the monitor  
5
Specifications  
9
6 Troubleshooting  
10  
EN  
1
 
Do not place any sources of danger on the  
apparatus (e.g. liquid filled objects, lighted  
candles).  
Where the plug of the Direct Plug-in  
Adapter is used as the disconnect device,  
the disconnect device shall remain readily  
operable.  
The small parts of this monitor can be  
swallowed by babies or small children.  
Keep these parts out of reach of children.  
1 Important  
Safety  
Caution  
To reduce the risk of fire or electric shock, this  
apparatus should not be exposed to rain or moisture  
and objects filled with liquids, such as vases, should not  
be placed on this apparatus.  
Notice  
Read these instructions.  
Keep these instructions.  
Heed all warnings.  
Follow all instructions.  
Do not use this apparatus near water.  
Clean only with dry cloth.  
Do not block any ventilation openings.  
Install in accordance with the  
Any changes or modifications made to this  
device that are not expressly approved by  
Philips Consumer Lifestyle may void the user’s  
authority to operate the equipment.  
Disclaimer  
If you are on a remote Wi-Fi network or 3G  
connection, 10 seconds to 15 seconds delay in  
video and audio streaming to your smartphone  
can occur.  
Your use of Philips In.Sight, which is provided by  
Yoics Inc., is at your sole risk. Koninklijke Philips  
Electronics N.V. and its subsidiary companies  
(individually and collectively “Philips”) are not  
responsible for the operation of such Philips  
In.Sight or your use thereof and Philips shall  
have no liability to you related thereto.  
manufacturer's instructions.  
Do not install near any heat sources such  
as radiators, heat registers, stoves, or  
other apparatus (including amplifiers) that  
produce heat.  
Protect the power cord from being  
walked on or pinched, particularly at plugs,  
convenience receptacles, and the point  
where they exit from the apparatus.  
Only use attachments/accessories specified  
by the manufacturer.  
Unplug this apparatus during lightning  
storms or when unused for long periods  
of time.  
Your product is designed and manufactured  
with high quality materials and components,  
which can be recycled and reused.  
Refer all servicing to qualified service  
personnel. Servicing is required when  
the apparatus has been damaged in any  
way, such as power-supply cord or plug  
is damaged, liquid has been spilled or  
objects have fallen into the apparatus, the  
apparatus has been exposed to rain or  
moisture, does not operate normally, or  
has been dropped.  
When this crossed-out wheeled bin symbol is  
attached to a product it means that the product  
is covered by the European Directive 2002/96/  
EC.  
Apparatus shall not be exposed to  
dripping or splashing.  
2
EN  
 
Please inform yourself about the local separate  
collection system for electrical and electronic  
products.  
Please act according to your local rules and  
do not dispose of your old products with your  
normal household waste. Correct disposal of  
your old product helps to prevent potential  
negative consequences for the environment and  
human health.  
This offer is valid up to three years after  
product purchase to anyone in receipt of this  
information.To obtain source code, please  
contact [email protected]. If you prefer  
not to use email or if you do not receive  
confirmation receipt within a week after mailing  
to this email address, please write to "Open  
SourceTeam, Philips Intellectual Property &  
Standards, P.O. Box 220, 5600 AE Eindhoven,  
The Netherlands." If you do not receive timely  
confirmation of your letter, please email to the  
email address above.  
This product complies with the radio  
interference requirements of the European  
Community.  
ꢀꢁꢂꢃ  
* Wireless and Ethernet LAN functions are  
authorized for indoor use only.  
Hereby, Philips Consumer Lifestyle, declares that  
this wireless Home Monitor (M100/M100D) is  
in compliance with the essential requirements  
and other relevant provisions of Directive  
1999/5/EC.  
A copy of the EC Declaration of Conformity  
is available from the electronic user manual on  
Open source software  
Philips Electronics Hong Kong Ltd. hereby offers  
to deliver, upon request, a copy of the complete  
corresponding source code for the copyrighted  
open source software packages used in this  
product for which such offer is requested by  
the respective licenses.  
EN  
3
 
2 Your wireless  
home monitor  
Product overview  
a
Please read and understand the accompanied  
safety sheet before you use this monitor.  
To fully benefit from the support that Philips  
com/welcome.  
b
c
f
e
d
What's in the box  
a Camera lens  
b Microphone  
c LED light  
d Magnetic base  
e DC power connector  
f Reset key  
4
EN  
 
Mount on ceiling  
3 Placement  
If you install on a ceiling, select ‘Image Flip  
(Image Flip)’ in the ‘Settings ( )’ options of  
your monitor.  
You can place the Monitor on a flat surface with  
the magnetic base. Or you can attach it to the  
ceiling or wall, see the pictures below:  
Note  
Before you place the monitor, make sure the monitor is  
close to a power outlet.  
Before you secure the supplied dowels and screws, drill  
holes on a flat and hard surface.  
Mount on wall  
EN  
5
 
4 Follow the on-screen App instructions.  
4 Set-up  
5 When prompted, input your Wi-Fi network  
name and your Wi-Fi password.  
If you want to set-up another monitor,  
repeat the steps of ‘3 – Set-up’.  
You can see and hear what is happening in  
your room from anywhere in the world with a  
smartphone.  
6 In.Sight App will generate a QR code, and  
hold approx. 15 cm (0.5 ft) in front of the  
monitor lens.  
What you need  
1 Make sure your Wi-Fi router is turned  
on and that your Smartphone orTablet is  
wirelessly connected to your Wi-Fi router  
network.  
2 Have your Wi-Fi network name (SSID) and  
Wi-Fi network password available as you  
need to fill these in.You can look up your  
Wi-Fi network name in the settings of your  
phone or tablet.  
3 Download ‘Philips In.SightApp from Apple  
App Store.  
4 Connect the monitor to power.When  
power is connected, wait till the Monitor  
light flashes Amber.  
Use the monitor  
After set-up, you are ready to use the monitor.  
Launch the Philips In.Sight App on your  
smartphone or tablet.  
3
You can use the monitor when it is connected  
to your own Wi-Fi network or any other Wi-Fi  
network. If there is no Wi-Fi network available,  
it will work over 3G. Please note that 3G data  
charges can occur.  
After log-in, you see thumbnail overview of the  
monitor(s).Tap the thumbnail for full screen  
viewing.  
1
2
Connect Monitor toWi-Fi  
network  
1 Make sure that your smartphone or tablet  
is connected to your Wi-Fi network.  
2 Start the App.  
3 Log in with your Philips In.Sight account –  
or create a new account if you don’t have  
an account.  
6
EN  
 
Application Overview  
Motion alert  
: Monitor Connection status. Green light dot  
means the monitor is connected to Wi-Fi, and  
able to stream video. Red light dot means the  
monitor is not connected or has a problem  
with connection and no video streaming  
is possible. In this case, make sure that the  
monitor is connected to Wi-Fi, and repeat  
the ‘3 – Set-Up’ if necessary, or consult the  
Troubleshooting’ section.  
If the monitor detects a movement within a  
specified range, a 30-second video is recorded  
to your Dropbox account, and you will receive  
an alert from your smartphone or tablet.You  
have an overview of all alerts in the  
list.To  
enable Dropbox upload, fill in your Dropbox  
account details in ‘Settings’ – ‘General  
(General)’.  
Set-up Motion Alert:  
: Motion alert: this highlights when the  
monitor detects motion – enable this in  
‘Settings’.  
:Audio alert: this highlights when the  
monitor detects audio – enable this in  
‘Settings’.  
: Share Monitor: share your monitor to  
friends so they can view your monitor –  
enable this in ‘Settings’.  
: Monitor list: list all your monitors.  
:Alert list: list the alerts from your  
monitors.  
1)Tap , and tap a monitor name, and tap  
Motion alert (Motion alert).  
2) Drag and resize on the screen view to  
select the area to be monitored. Use the slider  
to set a sensitivity level.  
Log-in to your Dropbox account to look at  
the recorded alert video.  
Audio alert  
If the monitor detects noise within a specified  
range, a 30-second video is recorded to your  
Dropbox account, and you will receive an  
alert from your smartphone or tablet.You  
: Settings: settings and options for monitors.  
My Monitors (My Monitor) tab: Lists your  
monitors.  
Friend’s (Friend's) tab:View monitor’s video  
shared by your friends.  
Add (Add) tab:Add additional monitors.  
Take a photo  
have an overview of all alerts in the  
list.To  
enable Dropbox upload, fill in your Dropbox  
account details in ‘Settings’ – ‘General  
(General)’.  
Set-up Audio Alert:  
1)Tap , and tap a monitor name, and tap  
Audio alert (Audio alert).  
Tap to take a picture.The picture is stored  
on your smartphone.  
Record video  
2) Use the slider to set a sensitivity level.  
Log-in to your Dropbox account to look at  
the recorded alert video.  
Tap  
to record a video.The video is directly  
Share your monitor  
uploaded to your private Dropbox account.  
Fill in your Dropbox account details in  
‘Settings’ – ‘General (General)’. Please register  
yourself for a free account at Dropbox.com if  
you don’t have an account.  
Share the monitor’s video to your family,  
friends or colleagues.  
1)Tap from the monitor overview page  
(you can also enable this in the settings part).  
2) Make sure on your friend’s smartphone or  
tablet, the Philips In.Sight App is installed and  
that an Philips In.Sight Account is created.  
3) Fill in the email address of your friend you  
want to share the monitor with.The email  
address of your friend must be the same email  
address used to create the Philips In.Sight  
Account.  
EN  
7
 
Watch the monitor on your web browser  
After you have registered your account and  
set up the monitor via your smartphone or  
tablet, you can also watch it via your favorite  
web browser (Safari, Chrome, Internet  
Explorer, Firefox). Enter the following address  
insightwebview  
Access more options  
Tap to enable or disable more options like  
audio and movement alerts, turn on or off  
the monitor light, Dropbox settings, change  
monitor name,Image Flip (Image Flip)’ or  
other settings.  
8
EN  
 
5 Specifications  
Note  
Specifications are subject to change without notice  
Output  
VGA, QVGA  
resolution  
Lens  
F2.8  
Frame rate  
30 fps atVGA, QVGA  
Focus mode 0.4m  
Focus range  
Video  
1 m to infinity  
h.264  
format  
Connectivity Wi-Fi  
Power  
supply  
DC 5V, 600mA;  
Model name:ASUC30z-050060  
(z = a, b, c, and e)  
a direct plug-in power adapter  
with USB output terminal  
and a different country plug  
type ('a'=America, 'b'=Britain,  
'c'=Australia, 'e'=Europe)  
Dimensions  
(w x h x d)  
Net weight  
Operating  
temperature  
Software  
35.9 x 83.8 x 34.3mm  
approx. 52g  
0 to 40 degrees celsius  
iOS 4.3, iPhone 3GS and up,  
iPodTouch 4th generation and  
up  
supported  
EN  
9
 
Unlike legacy solutions, In.Sight does  
not require port forwarding.There is  
no risk from leaving ports open on the  
network. In.Sight uses secure peer to peer  
networking solution which provides a  
secure, encrypted connection each time  
your camera is viewed from a remote  
location.To learn more about secure  
connectivity with Philips In.Sight, visit http://  
will work with most standard router  
settings and is also typically compatible  
with most anti-virus and internet security  
programs. On-line test diagnostic is  
available to determine if your network is  
compatible with these modern internet  
yp_diags.php  
6 Troubleshooting  
Warning  
Risk of electric shock. Never remove the casing of the  
monitor.  
To keep the warranty valid, never try to repair  
the monitor yourself.  
If you have problems using this monitor, check  
the following points before you request service.  
If you still have a problem, register your monitor  
Cannot connect the monitor to aWi-Fi  
network (the monitor light is blinking amber  
or green).  
What do the colored LED lights on the  
monitor mean?  
If the monitor blinks amber, you can set-up  
the monitor again - please repeat '3 – Set-  
up' of this user manual.  
No light: no power is connected to  
monitor  
Solid amber light: Monitor is booting up  
Blinking amber light: Monitor is ready to  
set-up, follow App on-screen instructions  
(refer to '3 – Set-Up')  
Blinking green light: Monitor is connecting  
to Wi-Fi network  
Solid green light: Monitor is connected to  
Wi-Fi network and ready to use  
If the monitor still does not work or is  
blinking green or amber, you may need to  
reset the monitor by pressing the reset  
button with a thin object (i.e. paper clip)  
on the back of the monitor, hold this for  
20 seconds.After that, repeat 3 – Set-up of  
this user manual.  
Philips In.Sight supports general WEP,WPA  
and WPA2. Philips recommends using  
WPA or WPA2 as these are safest Wi-Fi  
security settings.The Philips In.Sight does  
not support WEP Sub Key 2, 3 , 4. Please  
change your router settings to WPA or  
WPA2 if you are not able to connect, refer  
to your router’s user manuel.  
Video streaming is slow or has a delay.  
The speed of login and getting the video  
feed from the monitor highly depends on  
the speed of the connection you are using.  
The Internet speed either from your Wi-Fi  
network or 3G/Edge highly influences the  
performance of the App.The faster the  
connection speed, the faster you can see  
the video from the Monitor.  
To improve wireless performance, avoid  
using a Wi-Fi channel that is heavily used  
(e.g. channel 11) or has overlap with a  
nearby other Wi-Fi network.  
Keep away from potential sources of  
interference which may affect Wi-Fi signal,  
such as microwave ovens.  
Philips recommends high-speed Internet  
connection of 800kbps upload speed or  
above for your Wi-Fi router.  
10 EN  
 
When on a remote network (either another  
Wi-Fi network or on 3G), I can only watch for  
5 minutes.  
When on a remote network – either Wi-Fi  
or on 3G, you can only watch 5 minutes  
per session.You have unlimited sessions  
per day. If you want to watch longer per  
session, in-app upgrades are available. Go  
to ‘Settings ( )’ – ‘General (General)’ and  
select ‘In.Sight Account (In.Sight Account)’.  
When you are on your local Wi-Fi  
network, you have unlimited viewing time.  
I can only share to 2 friends, how can I share  
to more friends?  
When you want to share to more than 2  
friends, in-app upgrades are available. Go  
to ‘Settings( )’ – ‘General (General)’ and  
select ‘In.Sight Account (In.Sight Account)’.  
I want to watch more than one monitor at the  
same time on my tablet’s full monitor view.  
You can watch more than one monitor at  
the same time on your tablet via in-app  
upgrade. Go to ‘Settings ( )’ – ‘General  
(General)’ and select ‘In.Sight Account (In.  
Sight Account)’.  
EN 11  
 
Specifications are subject to change without notice  
© 2012 Koninklijke Philips Electronics N.V.  
All rights reserved.  
M100_12_UM_V2.1  
 

Philips Cassette Player AQ 6481 01P User Manual
Philips DVD Recorder DVDR99 User Manual
Philips DVD Recorder DVDR3575H 05 User Manual
Philips Portable DVD Player PET941D 58 User Manual
Pioneer Stereo System VSX 33 User Manual
Pioneer Two Way Radio FM1200 User Manual
Planet Technology Network Card VIP 156 User Manual
Powermate Portable Generator PM054300017 User Manual
Prince Castle Food Warmer FHB 36B User Manual
PYLE Audio Microphone PDWM1500 User Manual