Philips Headphones SHB7000 User Manual

Always there to help you  
Register your product and get support at  
SHB7000  
Question?  
Contact  
Philips  
User manual  
 
Contents  
5 Technical data  
9
1 Important  
2
2
Hearing Safety  
Electric-, Magnetic- and  
Electromagnetic Fields (EMF)  
General information  
Disposal of your old product  
Remove the integrated battery  
Notice for the European Union  
Trademarks  
6 Frequently asked questions  
10  
2
2
3
3
3
3
Bluetooth headset does not switch on. 10  
Fail to pair with a mobile phone.  
Pairing does not work.  
The mobile phone cannot find the  
headset.  
10  
10  
10  
Voice dialing or redialing does not work. 10  
The other side cannot hear me.  
The headset is connected to a  
Bluetooth stereo enabled mobile  
phone, but music will play on the  
mobile phone's speaker only.  
Audio quality is poor and crackling  
noises can be heard.  
Audio quality is poor when streaming  
from the mobile phone is very slow,  
or audio streaming does not work  
at all.  
10  
2 Your bluetooth stereo headset  
Introduction  
4
4
4
4
4
What's in the box  
What else you'll need  
Compatibility  
Overview of your Bluetooth stereo  
headset  
10  
10  
5
3 Get started  
6
6
11  
11  
Charge the headset  
Pair the headset with your mobile phone 6  
I hear but cannot control music on my  
device (e.g. skip forward/backward).  
Headset does not work when audio  
cable is connected.  
11  
11  
4 Use the headset  
Connect the headset to a mobile phone  
Automatic power saving  
Use your headset  
7
7
7
7
8
8
Restore the factory setting  
Wear your headset  
Use with an audio cable  
EN  
1
 
which, like any electronic apparatus, in  
general have the ability to emit and receive  
electromagnetic signals.  
1 Important  
Hearing Safety  
Danger  
2. One of Philips’ leading Business Principles  
is to take all necessary health and safety  
measures for our products, to comply with all  
applicable legal requirements and to stay well  
within the EMF standards applicable at the  
time of producing products.  
3. Philips is committed to develop, produce and  
market products that cause no adverse health  
effects.  
4. Philips confirms that if its products are  
handled properly for their intended use,  
they are safe to use according to scientific  
evidence available today.  
To avoid hearing damage, limit the time you use the  
headphones at high volume and set the volume to a  
safe level.The louder the volume, the shorter is the safe  
listening time.  
5. Philips plays an active role in the development  
of international EMF and safety standards,  
enabling Philips to anticipate further  
developments in standardization for early  
integration in its products.  
Be sure to observe the following guidelines  
when using your headphones.  
Listen at reasonable volumes for  
reasonable periods of time.  
Be careful not to adjust the volume  
continuously upwards as your hearing  
adapts.  
General information  
To avoid damage or malfunction:  
Do not turn up the volume so high that  
you can’t hear what’s around you.  
• Do not expose the headset to excessive heat.  
• Do not drop your headset.  
• Apparatus shall not be exposed to dripping  
or splashing.  
• Do not allow your headset to be submerged  
You should use caution or temporarily  
discontinue use in potentially hazardous  
situations.  
Excessive sound pressure from earphones  
and headphones can cause hearing loss.  
in water.  
• Do not use any cleaning agents containing  
alcohol, ammonia, benzene, or abrasives.  
• If cleaning is required use a soft cloth, if  
necessary dampened with a minimum  
amount of water or diluted mild soap, to  
clean the product.  
Using this headset with both ears covered  
while driving is not recommended and may  
be illegal in some areas while driving.  
For your safety, avoid distractions from  
music or phone calls while in traffic or  
other potentially dangerous environments.  
About operating and storage temperatures  
• Do not operate or store in a place where  
temperature is below -15ºC (5ºF) or above  
55ºC (131ºF) as this may shorten your  
battery life.  
The integrated battery shall not be exposed  
to excessive heat such as sunshine, fire or the  
like.  
Electric-, Magnetic- and  
Electromagnetic Fields (EMF)  
1. Royal Philips Electronics manufactures and  
sells many products targeted at consumers,  
2
EN  
 
If there is no collection/recycling system for  
electronic products in your country, you can  
protect the environment by removing and  
recycling the battery before disposing the  
headset.  
Disposal of your old product  
Your product is designed and manufactured  
with high quality materials and components,  
which can be recycled and reused.  
a
b
When this crossed-out wheeled bin symbol is  
attached to a product it means that the product is  
covered by the European Directive 2002/96/EC.  
Please inform yourself about the local separate  
collection system for electrical and electronic  
products.  
c
d
Please act according to your local rules and  
do not dispose of your old products with your  
normal household waste. Correct disposal of  
your old product helps to prevent potential  
negative consequences for the environment and  
human health.  
Battery disposal  
Notice for the European  
Union  
Your product contains batteries covered by the  
European Directive 2006/66/EC, which cannot  
be disposed of with normal household waste.  
Hereby, Philips Consumer Lifestyle, BG  
Communications, Headphones & Accessories,  
declares that this Philips Bluetooth stereo  
headset SHB7000/SHB7000WT is in  
compliance with the essential requirements and  
other relevant provisions of Directive 1999/5/  
EC.  
Please inform yourself about the local rules on  
separate collection of batteries.The correct  
disposal of batteries helps prevent potentially  
negative consequences on the environment and  
human health.  
Remove the integrated  
battery  
Trademarks  
Trademarks are the property of Koninklijke  
Philips Electronics N.V. or their respective  
owners.The Bluetooth word mark and logos  
are owned by the Bluetooth SIG, Inc. and  
any use of such marks by Koninklijke Philips  
Electronics N.V. is under license.  
Warning  
Make sure the headset is disconnected from the USB  
charging cable before removing the battery.  
EN  
3
 
2 Your bluetooth  
stereo headset  
Quick start guide  
EN  
Philips Bluetooth stereo headset SHB7000/SHB7000WT  
Congratulations on your purchase, and  
welcome to Philips!To fully benefit from the  
support that Philips offers, register your product  
Quick start guide  
Introduction  
With this Philips Bluetooth stereo headset, you can:  
What else you'll need  
A mobile phone that is capable of Bluetooth  
stereo streaming is compatible with the  
Bluetooth A2DP profile.  
Enjoy convenient wireless hands-free call  
Enjoy and control wireless music  
Switch between calls and music  
Enjoy music on non-Bluetooth devices with  
audio cable  
Other devices (Notebooks, PDA's, Bluetooth  
adapters, MP3 players etc.) are also compatible  
if they share the Bluetooth profiles supported  
by the headsets.These profiles are:  
For wireless Hands-Free communication:  
What's in the box  
The Bluetooth Headset profiles (HSP) or  
the Bluetooth Hands-Free profile (HFP).  
For wireless stereo listening:  
The Bluetooth Advanced Audio  
Distribution profile (A2DP).  
For wireless music control:  
The Bluetooth AudioVideo Remote  
Control profile (AVRCP).  
Headset  
Compatibility  
Your headset is compatible with Bluetooth  
enabled mobile phones. It features Bluetooth  
version 3.0. It also works with devices featuring  
other Bluetooth versions that support the  
Headset profile (HSP), Hands-Free profile  
(HFP),Advanced Audio Distribution profile  
(A2DP) and Audio/Video Remote Control  
profile (AVRCP).  
USB charging cable  
Audio cable  
4
EN  
 
Overview of your Bluetooth  
stereo headset  
a Mic  
b
Turn the headset on or off  
Play/Pause/Pick up call/Hang up/Redial/  
Reject call  
c Audio input jack  
d Volume/Track control  
e Charging slot  
EN  
5
 
3
4
Press and hold  
until the LED starts  
3 Get started  
flashing white and blue alternately.  
» The headset is in pairing mode, which  
lasts five minutes.  
Pair the headset with the mobile phone.  
For details, refer to the user manual of  
your mobile phone.  
Charge the headset  
A sample pairing is shown below.  
Warning  
1
2
3
Activate the Bluetooth feature of your  
mobile phone, search for the model  
number of the headset.  
Before you use your headset for the first time, charge  
the battery for four hours for optimum battery capacity  
and lifetime.  
Use only the original USB charging cable to avoid any  
damage.  
On mobile phones featuring Bluetooth  
2.1+EDR or higher, you do not need to  
enter a pass code.  
End a call before charging the headset, as connecting  
the headset for charging will power off the unit.  
Plug the headset into a powered USB port with  
an USB charging cable.  
From the found devices, select Philips  
SHB7000.  
» LED turns white during charging and  
turns off when the headset is fully  
charged.  
Enter "0000" (4 zeros) if prompted to  
enter the pin code of the headset.  
Tip  
10:35  
10:36  
10:37  
Settings  
Connectivity  
Settings  
Settings  
Connectivity  
Normally, a full charge takes three hours.  
Bluetooth  
Devices Found  
Enter Password  
****  
Add  
Bluetooth  
device  
Philips SHB7000  
0000  
Select  
Pair the headset with your  
mobile phone  
Select  
Select  
Back  
Back  
Back  
Before you use the headset with your mobile  
phone for the first time, pair it with the mobile  
phone.A successful pairing establishes a unique  
encrypted link between the headset and the  
mobile phone.The headset stores the last eight  
links in the memory. If you try to pair more than  
eight devices, the link for the earliest paired  
devices is replaced by the new link.  
1
2
Make sure that the mobile phone is turned  
on and its Bluetooth feature is activated.  
Make sure that the headset is charged and  
turned off.  
6
EN  
 
Play or pause  
music.  
Pick up or  
terminate a  
call.  
1 short beep  
1 short beep  
Press  
Press  
4 Use the headset  
Reject a call.  
Press and  
hold  
1 short beep  
1 short beep  
1 long beep  
Connect the headset to a  
mobile phone  
Redial the last  
number.  
Press  
twice  
1
2
Turn on your mobile phone.  
Switch caller in  
a call.  
Press  
twice  
Press and hold  
to turn the headset on.  
» The blue LED flashes.  
Adjust volume. Slide up and 1 short beep  
down +/-  
Press  
» The headset is reconnected to the last  
connected device automatically. If the  
last one is not available, the headset  
tries to reconnect to the second last  
connected device.  
Skip forward.  
1 short beep  
1 short beep  
Skip backward. Press  
twice  
Tip  
Mute/unmute  
the mic while  
in a call  
1 short beep  
Press  
twice  
If you turn on the mobile phone or its Bluetooth  
feature after turning on the headset, connect the  
headset from the Bluetooth menu on your mobile  
phone.  
Other status and indicators  
Headset status  
Indicator  
The headset is connected  
to a Bluetooth device, while flashes every 6  
Blue LED  
Automatic power saving  
the headset is in standby  
mode or while you are  
listening to music.  
seconds.  
If the headset fails to connect any Bluetooth  
device within range in five minutes, it powers  
down automatically to save the battery life.  
The headset is ready for  
pairing.  
LED flashes  
whiteand  
bluealternately.  
Blue LED  
flashes fast.  
Use your headset  
The headset is on but not  
connected to a Bluetooth  
device.  
Task  
Operation Sound or LED  
Indicator  
Turn the  
headset on.  
Press and  
hold  
1 short beep  
There is an incoming call.  
Blue LED  
flashes twice  
per second.  
for  
• 1 blue flash:  
Battery level  
> 50%  
more than 1  
second  
Low battery.  
White LED  
flashes.  
White LED is  
off.  
• 1 white flash:  
Battery level  
< 50%  
Battery is fully charged.  
Turn the  
Press and  
1 long beep  
headset off.  
hold  
more than 4  
seconds  
for  
1 long white  
flash  
EN  
7
 
Wear your headset  
Adjust the headband for the best fit.  
Use with an audio cable  
With the supplied audio cable, you can use the  
headset with non-Bluetooth enabled devices or  
use the headset on airplane. No battery power  
is required when you use the headset with an  
audio cable.  
Caution  
Finish your call before connecting the audio cable, as  
this will switch off battery power and end an incoming  
call.  
Connect the supplied audio cable to  
the headset and;  
an external audio device.  
8
EN  
 
5 Technical data  
Up to 9 hours of play time or talk time  
Up to 200 hours of standby time  
Normal time for a full charge: 3 hours  
Rechargeable Lithium-Polymer battery  
(200 mAh)  
Bluetooth 3.0, Bluetooth mono support  
(Headset Profile - HSP, Hands-Free  
Profile - HFP), Bluetooth stereo supported  
(Advanced Audio Distribution Profile  
- A2DP;AudioVideo Remote Control  
Profile - AVRCP)  
Operating range: Up to 15 meters (50  
feet)  
Adjustable, flat-folding headband  
Noise isolating slow recovery foam  
Digital echo & noise reduction  
Auto power off  
Battery status check  
Specifications are subject to change without  
notice.  
EN  
9
 
Pairings may have been reset or headset has  
been previously paired with other device.  
6 Frequently  
Pair the headset with the mobile phone  
again as described in the user manual.  
asked questions  
Voice dialing or redialing does  
not work.  
Your mobile phone may not support this  
feature.  
Bluetooth headset does not  
switch on.  
Battery is low.  
Charge the headset.  
The audio cable is connected to the headset.  
Disconnect the audio cable.  
The other side cannot hear  
me.  
The microphone is muted.  
Press  
to enable the microphone.  
Fail to pair with a mobile  
phone.  
Bluetooth disabled.  
The headset is connected to  
a Bluetooth stereo enabled  
mobile phone, but music will  
play on the mobile phone's  
speaker only.  
Enable the Bluetooth feature on your  
mobile phone and turn on the mobile  
phone before you turn on the headset.  
Pairing does not work.  
The headset is not in pairing mode.  
The mobile phone may have the option to  
listen to music via speaker or headset.  
Refer to the user manual of your  
mobile phone on how to transfer the  
music to the headset.  
Follow the steps described in this user  
manual.  
Make sure that the LED light flashes  
whiteand blue alternately before you  
release . Do not stop holding the button  
after seeing the blue LED only.  
Audio quality is poor and  
crackling noises can be heard.  
The Bluetooth audio source is out of range.  
The mobile phone cannot  
Reduce the distance between the headset  
and the Bluetooth audio source, or  
remove obstacles between them.  
find the headset.  
The headset may be connected to another  
previously paired device.  
Turn the connected device off or move it  
out of range.  
10 EN  
 
Audio quality is poor when  
streaming from the mobile  
phone is very slow, or audio  
streaming does not work at  
all.  
The mobile phone may only support (mono)  
HSP/HFP but not support A2DP.  
Refer to the user manual of the mobile  
phone for detailed information on  
compatibility.  
I hear but cannot control  
music on my device (e.g. skip  
forward/backward).  
The Bluetooth audio source does not support  
AVRCP.  
Refer to the user manual of the audio  
source for detailed information on  
compatibility.  
Headset does not work when  
audio cable is connected.  
Mic function will be deactivated if 3.5mm  
audio cable is connected to the headphone.  
In such case, the headphone is only for  
music enjoyment.  
Restore the factory setting  
Restore all original headset setting.  
Press  
and  
until the LED  
flashing white for 5 times sequentially.  
further support.  
EN 11  
 
0168  
Specifications are subject to change without notice  
© 2013 Koninklijke Philips Electronics N.V.  
All rights reserved.  
SHB7000_UM_00_EN  
 

Pelco Webcam System 9760 User Manual
Pentair Swimming Pool Quasar User Manual
Philips Digital Photo Frame ESXMIM User Manual
Philips Flat Panel Television 15PT2594 User Manual
Philips VCR VCR VR 170 07 User Manual
Pioneer CD Player SRC7127 B N User Manual
Porter Cable Air Compressor A18760 1006 1 User Manual
Porter Cable Cordless Drill 8500 User Manual
Poulan Tiller 423813 User Manual
Printronix Printer SL5000 User Manual