Philips Electric Shaver 4805XL User Manual

FULL TWO YEAR WARRANTY  
3. Never operate this razor if it has a dam-  
aged cord or plug, if it is not working prop-  
erly, if it has been dropped or damaged, or  
dropped into water. Return the razor to an  
Authorized Norelco Service Location for  
examination and repair.  
4. Keep the cord away from heated surfaces.  
5. Never drop or insert any object into any  
opening.  
6. Do not charge or plug in razor outdoors or  
operate where aerosol (spray) products  
are being used or where oxygen is being  
administered.  
7. Do not use this razor with a damaged or  
broken comb, as facial injury may occur.  
8. Always attach plug to razor first, then to  
outlet. Be certain that plug is inserted firm-  
ly into razor up to mark indicated on plug.  
To disconnect, turn razor off, then remove  
plug from outlet.  
9. To prevent possible damage to the cord, do  
not wrap cord around the razor.  
Philips Electronics North America Corporation warrants each new Norelco  
Product, Model 4807XL/4805XL (except cutters and combs), against defects  
in materials or workmanship for a period of two years from the date of pur-  
chase, and agrees to repair or replace any defective product without charge.  
IMPORTANT: This warranty does not cover damage resulting from  
accident, misuse or abuse, lack of reasonable care, the affixing of any  
attachment not provided with the product or loss of parts or subjecting  
the product to any but the specified voltage.* Use of unauthorized  
replacement parts will void this warranty.  
IMPORTANT SAFETY  
INSTRUCTIONS  
When using an electric razor, basic precautions  
should always be followed, including the following:  
Read all instructions before using this appliance.  
4807XL/4805XL  
Rechargeable Razor  
With Micro Action  
PHILIPS ELECTRONICS NORTH AMERICA CORPORATION WILL NOT  
PAY FOR WARRANTY SERVICE PERFORMED BY A NON-AUTHO-  
RIZED REPAIR SERVICE AND WILL NOT REIMBURSE THE CON-  
SUMER FOR DAMAGE RESULTING FROM WARRANTY SERVICE  
PERFORMED BY A NON-AUTHORIZED REPAIR SERVICE.  
NO RESPONSIBILITY IS ASSUMED FOR ANY SPECIAL, INCIDENTAL  
OR CONSEQUENTIAL DAMAGES.  
In order to obtain warranty service, simply take or ship the product  
postage prepaid to any Authorized Norelco Service Location. It is sug-  
gested that for your protection you return shipments of product by  
insured mail, insurance prepaid. Damage occurring during shipment  
is not covered by this warranty.  
DANGER  
To reduce the risk of electric shock:  
1. Do not reach for a razor that has fallen into  
water. Unplug immediately.  
2. Do not use while bathing or in a shower.  
3. Do not place or store razor where it can fall  
or be pulled into a tub or sink. Do not place  
in or drop into water or other liquid.  
4. Always unplug this razor from the electrical  
outlet immediately after using, except when  
razor is (re)charging.  
NOTE : No other warranty, written or oral, is authorized by Philips Electronics  
North America Corporation.  
This warranty gives you specific legal rights, and you may also have other  
rights which vary from state to state. Some states do not allow the exclu-  
sion or limitation of incidental or consequential damages, so the above  
exclusion and limitations may not apply to you.  
* Read enclosed instructions carefully.  
5. Unplug this razor before cleaning.  
Manufactured for:  
Norelco Consumer Products Company  
A Division of Philips Electronics North America Corporation  
1010 Washington Blvd.  
Stamford, CT 06912-0015  
TM  
6. When discarding razor, unplug razor and  
remove rechargeable batteries. See  
enclosed sheet for instructions.  
10. Never put razor in direct sunlight or store in  
pouch at a temperature above 140°F.  
MADE IN HOLLAND.  
This symbol on the product’s nameplate means it is listed  
by Underwriters’ Laboratories, Inc.  
WARNING  
SAVE THESE  
To reduce the risk of burns, fire, electric  
shock, or injury to persons:  
If you need help,  
Norelco, Lift and Cut, RAZORMATE and  
are Registered  
answers or service,  
please call us at  
1-800-243-3050  
Trademarks of Philips Electronics North America Corporation.  
INSTRUCTIONS  
1. Close supervision is necessary when this  
razor is used by, on, or near children or the  
disabled.  
and Micro Action are Trademarks of Philips Electronics North  
America Corporation.  
IMPORTANT: Your razor contains NICKEL-  
CADMIUM RECHARGEABLE BATTERIES.  
See enclosed instruction sheet for battery dis-  
posal information.  
or visit our website:  
PHILIPS and Philips Shield are Registered Trademarks of  
Philips Electronics N.V.  
2. Use this razor for its intended household  
use as described in this manual. Do not  
use attachments not recommended by  
Philips Electronics North America  
Corporation.  
© 1998 Philips Electronics North America Corporation.  
All Rights Reserved.  
R
LIFTANDCUT®  
PATENTED SHAVING SYSTEM  
INGENIOUS MEN’S GROOMING SOLUTIONS  
 
1. TO CHARGE  
2. CORD/CORDLESS  
SHAVING  
CORD  
3. ADJUSTABILITY  
BAND  
4. SHAVING  
5. POP-OUT  
TRIMMER  
6. TO CLEAN TRIMMER  
7. MAINTENANCE/  
CLEANING  
INSTRUCTIONS  
1. Select position best  
suited for your skin and  
beard type and which  
will give you the most  
comfortable shave.  
4. Lubricate Trimmer teeth  
twice a year with Norelco  
Razor Lubricant, model  
AL80, or one drop of  
mineral oil (Fig. 5).  
Use only the cord provided.  
(Re)charge at tempera-  
tures between 40°F and  
95°F. Charging at lower  
or higher temperatures  
adversely affects life-  
time of batteries.  
1. Remove Protective Razor  
Head Assembly Guard.  
Turn razor ON.  
2. Shave against the direc-  
tion of beard growth  
using a quick, circular  
motion.  
3. Keep the skin taut using  
your fingers to stretch  
the skin so blades can  
lift and cut whiskers off  
(Fig. 2).  
4. Easy does it. Gently  
press the razor to your  
skin so the floating  
heads can follow the  
contours of your face.  
5. Turn razor OFF (and  
unplug if shaving with  
cord).  
1. Switch razor ON.  
2. Push Trimmer Slide Switch  
up to pop out Trimmer.  
3 . H o l d T r i m m e r , a s  
shown (Fig. 3), to exact  
hairline desired. Move  
Trimmer downward with  
gentle pressure.  
4. Close Trimmer by push-  
ing Trimmer Slide Switch  
down.  
5. Turn razor OFF (and unplug  
if shaving with cord).  
1. Switch razor OFF (and  
unplug if shaving with  
cord).  
IMPORTANT  
1. Connect cord provided  
Always switch razor  
OFF and remove plug  
from outlet before  
cleaning.  
to razor.  
2. Push Trimmer Slide  
Switch up to pop out  
Trimmer.  
2. Plug into 100V to 240V  
AC/DC outlet.  
2. Each position is indicat-  
ed by a clicking sound.  
Move Adjustability Band  
(Fig. 1) on razor clock-  
wise for a lower setting  
and counterclockwise  
for a higher setting.  
Lowest setting for sen-  
sitive skin/soft beard  
(#1).  
Highest setting for not  
so sensitive skin/tough  
beard (#9).  
5. Close Trimmer by push-  
ing Trimmer Slide Switch  
shown.  
3. Slide and depress ON/  
OFF switch ON. Begin  
shaving.  
Always store razor with  
Protective Plastic Head  
Guard on Razor Head  
Assembly.  
Never clean, remove or  
replace head assembly  
while motor is on.  
Do not apply pressure  
to combs. Do not touch  
razor heads with hard  
objects as this may dent  
or damage precision-  
made slotted combs.  
Do not use razor if  
combs are damaged or  
broken.  
3. Brush out Trimmer sec-  
tion using long bristles  
of brush (Fig. 4).  
1. Slide and depress ON  
OFF switch to OFF.  
4. Turn razor OFF and un-  
plug.  
2. Connect cord to razor.  
Plug into 100V to 240V  
AC/DC outlet.  
IMPORTANT: It is not  
recommended that this  
razor be used exclusively as  
a corded razor. Continual  
use as a corded razor as  
well as continuously charg-  
ing razor will reduce life of  
batteries.  
3. Green Charging Indicator  
Light will light to indicate  
razor is (re)charging.  
4. Charging requires a full 8  
hours.  
(Re)charging longer  
than required period of  
time will not harm razor.  
However, continuously  
charging razor will  
reduce life of batteries.  
Choose one setting for  
“custom” shaving cheeks/  
chin, another “comfort”  
setting for neck.  
NOTE: Razor does not  
recharge during corded  
shaving.  
IMPORTANT: Clean razor  
head regularly following  
MAINTENANCE instruc-  
tions.  
CORDLESS  
1. Charge according to  
directions. Unplug razor  
from outlet.  
2. Slide and depress ON/  
OFF switch ON. Begin  
shaving.  
1A.TO RECHARGE  
1. Recharging requires 8  
hours for approximately  
2 weeks of 3 minute  
shaves per day.  
1
2
3
4
5
2. If razor has not been  
used for at least  
a
month, razor must be  
recharged for a full 8  
hours (see TO CHARGE).  
 
7. CLEANING INSTRUC-  
TIONS (CONT.)  
7B.ONCE EVERY 4-8 WEEKS  
8. HQ4 REPLACE-  
MENT HEADS  
9. IMPORTANT  
BATTERY  
R
7A. ONCE A WEEK  
1 . Clean Razor Head Assem-  
bly as shown (Fig. 6).  
2. Press Razor Head Re-  
lease Button and lift  
Razor Head Assembly  
using thumb and index  
finger to remove from  
razor housing (Fig. 7).  
3. Clean inside of Razor  
Head Assembly and  
Hair Chamber with long  
bristles of brush.  
AND RAZOR  
DISPOSAL  
lease frame and lift out.  
Set frame aside (Fig. 8).  
a degreasing liquid (e.g.  
Norelco Razor Cleaner,  
RAZORMATE Electrosonic  
Cleaner or alcohol).  
IMPORTANT: Do NOT  
60-Day Money-Back Guarantee  
ACCESSORIES  
Replacement Heads:  
INFORMATION  
interchange the cutters and  
To enjoy the closest and most comfortable shave from your new  
Norelco Men’s Razor, the razor should be used exclusively for 3  
weeks. This allows your hair and skin enough time to adapt to the  
Norelco Shaving System. If, after that period of time, you are not  
fully satisfied with your Norelco Men’s Razor, send the product back  
and we’ll refund you the full purchase price.  
3. Remove one cutter/  
comb, at a time, out of  
frame as shown (Fig. 9).  
4. Cutter should be held as  
shown and brushed in an  
upward motion (Fig. 10).  
Clean inside of comb with  
long bristles of brush in a  
circular motion.  
5. For consistently close and  
comfortable shaves, razor  
heads should be cleaned  
and lubricated every 4-8  
weeks. Clean heads in  
combs. They are a matched  
set and if interchanged may  
adversely affect shaving  
performance until cutters  
reseat themselves. Therefore,  
remove, clean, and replace  
each set individually.  
When discarding your razor:  
The self-sharpening rotary  
blades in your Norelco  
razor are precision-made to  
give closer shaves. When  
they finally do need replac-  
ing, specify only Norelco  
brand replacement cutters  
and combs, model HQ4.  
DO NOT USE shaver  
sharpeners as this will  
damage your blades and  
lifters and will adversely  
affect the shaving perfor-  
mance.  
6. While holding Razor  
Head Assembly in one  
hand, gently place one  
cutter/comb back into  
Assembly (Fig. 11).  
7. Repeat procedure for  
other two cutting heads.  
8. Replace frame, with  
cutting heads in place,  
back into Razor Head  
Assembly. While press-  
ing down, turn wheel  
clockwise to lock frame  
into place (Fig. 12).  
9 . P r e s s R a z o r H e a d  
Assembly back on razor  
housing.  
10. Spread Norelco Razor  
Lubricant, model AL80,  
or one drop of mineral  
oil over floating heads  
with your finger.  
THIS NORELCO RAZOR  
CONTAINS NICKEL-CAD-  
The razor must be shipped prepaid by insured mail, insurance  
prepaid, and have the sales slip, indicating purchase price and  
the date of purchase, enclosed. The razor must be postmarked  
no later than 60 days after the date of purchase. Norelco reserves  
the right to verify the purchase price of the razor and limit refunds  
not to exceed suggested retail price.  
MIUM  
RECHARGEABLE  
BATTERIES WHICH MUST  
BE RECYCLED OR DIS-  
POSED OF PROPERLY.  
1. Remove Razor Head  
Assembly (Fig. 7).  
2 . While holding Razor  
Head Assembly in one  
hand, press center wheel  
down while turning  
counterclockwise to re-  
Refer to enclosed instruc-  
tion sheet for directions on  
removing rechargeable bat-  
teries.  
Send dated sales slip, your complete name and address as indicated  
below, and the razor, prepaid to:  
4. Press Razor Head Assem-  
bly back on razor hous-  
ing.  
Norelco Consumer Products Company  
A Division of Philips Electronics North America  
Corporation  
CAUTION:  
10  
6
8
Batteries should be re-  
moved by consumer  
only when razor is to  
be discarded.  
Make sure razor is un-  
plugged before disman-  
tling for battery re-  
moval.  
All servicing or battery  
replacement should be per-  
formed by an Authorized  
Norelco Service Location  
only.  
P.O. Box 1116  
Skokie, IL 60076  
NOTE: It is recommended  
that you replace your razor  
heads once a year.  
Please allow 4-6 weeks for delivery of check.  
Razor Cleaners:  
Please Print!  
NAME:  
Norelco RAZORMATE Electro-  
sonic Heads Cleaner, model  
ERC100.  
Norelco Razor Cleaner,  
model RC1776.  
Norelco Razor Lubricant,  
model AL80.  
Norelco Razor Accessories  
may be purchased at a store  
near you, at an Authorized  
Norelco Service Location, or  
by using the handy order  
form enclosed.  
ADDRESS:  
CITY:  
STATE:  
ZIP:  
7
9
11  
12  
TELEPHONE NO.:  
(
)
Area Code  
REASON FOR RETURNING:  
 

Philips DVD Player PET1008 User Manual
Philips Indoor Furnishings 13781 0 User Manual
Philips MP3 Player 8084 User Manual
Philips Projector cBright 2 Series User Manual
Philips Stereo Amplifier TDA7056AT User Manual
Philips Work Light 57904 87 16 User Manual
PMC Sierra Switch Gigabit Ethernet Switch User Manual
Polaroid Portable DVD Player PDM 0744M User Manual
Polycom Projector 61 User Manual
ProForm Elliptical Trainer 83128775 User Manual