Philips Clock Radio AJ6200D User Manual

Always there to help you  
Register your product and get support at  
AJ6200D(White)  
AJ6200DB(Black)  
Question?  
Contact  
Philips  
User manual  
 
1 Important  
2 Your clock radio  
Congratulations on your purchase, and  
welcome to Philips!To fully benefit from the  
support that Philips offers, register your product  
Warning  
Never remove the casing of this clock radio.  
Never lubricate any part of this clock radio.  
Never place this clock radio on other electrical  
equipment.  
Keep this clock radio away from direct sunlight, naked  
What's in the box  
flames or heat.  
Make sure that you always have easy access to the  
power cord, plug or adaptor to disconnect the clock  
radio from the power.  
Always there to help you  
Register your product and get support at  
AJ6200D  
Question?  
Contact  
Philips  
Make sure that there is enough free space  
around the product for ventilation.  
The clock radio shall not be exposed to  
dripping or splashing.  
Do not place any sources of danger on the  
clock radio (e.g. liquid filled objects, lighted  
candles).  
User Manual  
Where the plug of the Direct Plug-in  
Adapter is used as the disconnect device,  
the disconnect device shall remain readily  
operable.  
Only use power supplies listed in the user  
manual.  
Battery usage CAUTION To prevent  
battery leakage which may result in bodily  
injury, property damage, or damage to the  
unit:  
Install all batteries correctly, + and - as  
marked on the unit.  
Do not mix batteries (old and new or  
carbon and alkaline, etc.).  
Remove batteries when the unit is not  
used for a long time.  
The batteries should not be exposed  
to excessive heat such as sunshine fire  
or the like.  
3
EN  
 
 
Overview of the main unit  
e
f
a
b
c
g
h
d
i
j
l
m
k
BUZZ  
DOCK  
FM  
AUDIO IN  
n
f AL1/AL2  
a SOURCE  
View alarm settings.  
Press to select a source.(DOCK/FM/  
Activate or deactivate alarm timer.  
AUDIO IN)  
Press and hold for 3 seconds to switch  
to standby mode.  
g VOLUME +/-  
Adjust volume.  
b SLEEP  
h First Knob (HOUR/PRESET)  
Set sleep timer.  
Adjust hour.  
Select a preset radio station.  
c SNOOZE/BRIGHTNESS  
Snooze alarm.  
Adjust display brightness.  
i Second Knob (MINUTE/TUNING)  
Adjust minute.  
Tune to an FM radio station.  
Skip to the previous or next track.  
d Display panel  
Show current information.  
e Dock for iPod/iPhone  
EN  
4
 
 
j Third Knob (SETTIME/SET RADIO/  
3 Get started  
CLOCK/SET AL1/SET AL2)  
Set time.  
Scan/store FM radio stations.  
Set alarm.  
Always follow the instructions in this chapter in  
sequence.  
k BUZZ/FM/DOCK  
Select an alarm source for Alarm 1 and  
Alarm 2.  
Connect power  
l
(5.0V 1 A)  
Charge your iPod/iPhone through USB  
cable (not included).  
The unit uses AC power supply. Batteries are  
used for alarm backup purpose only.  
m AUDIO IN  
Connect an external audio device.  
AC power  
n FM ANT  
Warning  
Improve FM reception.  
Risk of product damage! Make sure that the power  
supply voltage corresponds to the voltage printed on  
the back or the underside of the unit.  
Risk of electric shock! When you disconnect the AC  
power, always pull the plug from the socket. Never pull  
the cord.  
Connect the AC power cord to the wall socket.  
Tip  
To save energy, turn the unit off after use.  
Battery power  
Caution  
Batteries contain chemical substances, so they should  
be disposed of properly.  
5
EN  
 
 
4 Press OK on the First Knob to confirm.  
Note  
» The setting time is displayed.  
Batteries are not supplied with the accessories.  
bAt shows on the display when the battery level is low.  
5 Rotate the Third Knob to CLOCK after  
setting.  
» The hour and minute digits stops  
1 Open the battery compartment.  
blinking.  
2 Insert 2 batteries (type: 1.5V LR6/AA) with  
correct polarity (+/-) as indicated.  
Note  
3 Close the battery compartment.  
When an iPod/iPhone is connected, the clock radio  
synchronizes time from the iPod/iPhone automatically.  
Turn on  
The clock radio turns on automatically once  
your plugged in.  
Switch to standby mode  
Press SOURCE for 3 seconds to switch to  
standby mode.  
»
The source indicator on the display panel  
turns off.  
Set time  
1 Rotate the Third Knob to "SETTIME" to  
activate clock setting mode.  
» Hour and minute digits blinks.  
2 Rotate the First Knob to adjust the hour.  
3 Rotate the Second Knob to adjust the  
minute.  
EN  
6
 
 
4 Play from iPod/  
iPhone  
You can enjoy audio from iPod/iPhone through  
this clock radio.  
Compatible iPod/iPhone  
The clock radio supports these iPod and iPhone  
models:  
Made for.  
iPod touch (5th generation)  
iPod nano (7th generation)  
iPhone 5  
Listen to audio from iPod/  
iPhone  
Charge the iPod/iPhone  
Note  
When the clock radio is connected to power,  
the docked iPod/iPhone starts charging.  
Make sure that the Third Knob switched to CLOCK  
before setting.  
1 Place the iPod/iPhone in the dock.  
Adjust volume  
2 Press SOURCE repeatedly to select iPod/  
iPhone mode.  
You can adjust volume by pressing  
VOLUME +/- repeatedly.  
» The  
on the display panel lights up.  
3 Play audio on the iPod/iPhone.  
4 Rotate the Second Knob to select  
previous or next track.  
To remove the iPod/iPhone:  
Pull the iPod/iPhone out of the dock.  
7
EN  
 
 
5 Listen to FM  
radio  
Store FM radio stations  
automatically  
Note  
You can store a maximum of 20 FM radio stations.  
Tune to FM radio stations  
1 In FM mode, rotate the Third knob to SET  
RADIO.  
Tip  
FM  
»
begins to blink.  
Position the antenna as far as possible fromTV,VCR, or  
other radiation source.  
For better reception, fully extend and adjust the  
position of the antenna.  
2 Press and hold OK on the First Knob for  
three seconds.  
» The clock radio stores all the available  
FM radio stations, and broadcasts the  
first available station automatically.  
Note  
Make sure that the Third Knob switched to CLOCK  
before setting.  
Store FM radio stations  
manually  
1 Press SOURCE repeatedly to select FM  
tuner source.  
1 In FM mode, rotate the Third Knob to  
FM  
»
on the display panel lights up.  
SET RADIO.  
FM  
»
begins to blink.  
2 Rotate and hold the Second Knob for two  
seconds.  
2 Rotate and hold the Second Knob for two  
seconds.  
» The clock radio tunes to a station with  
strong reception automatically.  
» The last selected channel is displayed  
on the display panel.  
3 Repeat step 2 to tune in to more radio  
stations.  
To tune to a station manually:  
Rotate the Second Knob repeatedly until you  
find optimal reception.  
3 Rotate the First Knob again to select the  
target preset position.  
4 Press OK on the First Knob to confirm.  
5 Repeat steps 2-4 to store other stations.  
Note  
To remove a pre-stored station, store another station  
in its place.  
EN  
8
 
 
6 Other features  
Select a preset radio station  
Note  
Make sure that the Third Knob switched to CLOCK  
before setting.  
Set alarm timer  
1 Press SOURCE repeatedly to select FM  
In standby mode, you can set two alarms to ring  
at different time.  
tuner source.  
FM  
»
on the display lights up.  
2 Rotate the First Knob repeatedly to select  
Note  
a preset radio station.  
Make sure that you have set the clock correctly.  
1 Rotate theThird Knob to SET AL1 or SET  
AL2 to activate alarm setting mode.  
» The  
/
and time digits blink.  
2 Rotate the First Knob to adjust the hour.  
3 Rotate the Second Knob to adjust the  
minute.  
4 Press OK on First Knob to confirm.  
5 Rotate the Third Knob to CLOCK after  
setting.  
Select alarm source  
For alarm sound, you can select buzzer, your last  
listened radio station, or the last played audio  
on your iPod/iPhone.  
Tip  
If DOCK is selected as the alarm source, yet the audio  
cannot be played, buzzer will sound when alarm time  
comes.  
If FM is selected as the alarm source and the DOCK is  
playing under FM mode, buzzer will sound when alarm  
time comes.  
9
EN  
 
 
Set sleep timer  
Note  
Make sure that the Third Knob switched to CLOCK  
before setting.  
FM  
BUZZ  
DOCK  
This clock radio can switch to standby mode  
automatically after a preset period.  
Press SLEEP repeatedly to select the sleep  
timer period (in minutes).  
» When the sleep timer is activated,  
appears.  
Activate/deactivate alarm timer  
To deactivate the sleep timer:  
Press SLEEP repeatedly until [OFF] (off)  
appears.  
Note  
Make sure that the Third Knob switched to CLOCK  
before setting.  
15  
30  
60  
OFF  
90  
120  
1 Press AL1/AL2 to view alarm settings.  
» The  
/
lights up.  
2 Press AL1/AL2 again to activate or  
deactivate the alarm timer.  
Play audio from an external  
device  
» The  
/
appears if alarm timer is on  
and disappears if it is off.  
To stop the ringing alarm, press the  
Note  
corresponding AL1/AL2.  
» The alarm repeats ringing for the next  
Make sure that the Third Knob switched to CLOCK  
before setting.  
day.  
You can listen to audio from an external device  
through this clock radio.  
Snooze the alarm  
When alarm sounds, press SNOOZE.  
» The alarm snoozes and repeats ringing  
nine minutes later.  
1 Connect an audio cable to:  
the AUDIO IN socket on the clock radio.  
the headphone socket on an external device.  
2 Press SOURCE repeatedly to select the  
Audio-in source.  
» The on the display panel lights up.  
3 Play the external device (refer to its user  
manual).  
EN 10  
 
 
7 Product  
information  
Note  
Product information is subject to change without prior  
notice.  
Specifications  
Adjust display brightness  
Amplifier  
Rated Output Power  
5W RMS  
SNOOZE  
BRIGHTNESS  
Tuner  
Tuning Range  
FM: 87.5 - 108  
MHz  
Sensitivity  
FM: <22 dBf  
- Mono, 26dB S/N Ratio  
Search Selectivity  
Total Harmonic Distortion  
Signal to Noise Ratio  
FM: <30 dBf  
FM: <3%  
FM: >50 dBA  
General information  
AC Power  
Model:AS190-090-  
AD160; Input: 100-240  
V ~, 50/60Hz, 0.6A;  
Output: 9.0V 1600  
mA  
Operation Power  
Consumption  
<15 W  
Standby Power  
<1 W  
Consumption  
Dimensions - Main  
Unit (W x H x D)  
Weight - Main Unit  
195 x 99 x 113 mm  
0.79 kg  
11 EN  
 
 
8 Troubleshooting 9 Notice  
Any changes or modifications made to this  
Warning  
device that are not expressly approved by  
WOOX Innovations may void the user’s  
authority to operate the equipment.  
Never remove the casing of this device.  
To keep the warranty valid, never try to repair  
the system yourself.  
If you encounter problems when using this  
device, check the following points before  
requesting service. If the problem remains  
unsolved, go to the Philips Web page (www.  
philips.com/support).When you contact Philips,  
make sure that the device is nearby and the  
model number and serial number are available.  
No power  
Your product is designed and manufactured  
with high quality materials and components,  
which can be recycled and reused.  
Ensure that the power cord is connected  
securely.  
Ensure that there is power at the power  
supply socket.  
Ensure that the batteries are installed  
correctly.  
When this crossed-out wheeled bin symbol is  
attached to a product it means that the product  
is covered by the European Directive 2002/96/  
EC.  
Please inform yourself about the local separate  
collection system for electrical and electronic  
products.  
Please act according to your local rules and  
do not dispose of your old products with your  
normal household waste. Correct disposal of  
your old product helps to prevent potential  
negative consequences for the environment and  
human health.  
No response from the clock radio  
Disconnect and reconnect the AC power  
plug, then turn on the clock radio again.  
Poor radio reception  
Keep the clock radio away from other  
electronic devices to avoid radio  
interference.  
Fully extend and adjust the position of the  
FM antenna.  
Alarm does not work  
Set the clock/alarm correctly.  
Your product contains batteries covered by  
the European Directive 2006/66/EC, which  
cannot be disposed with normal household  
waste.Please inform yourself about the local  
rules on separate collection of batteries  
because correct disposal helps to prevent  
negative consequences for the environmental  
and human health.  
Clock/alarm setting erased  
Power has been interrupted or the power  
plug has been disconnected.  
Reset the clock/alarm.  
Environmental information  
All unnecessary packaging has been omitted.  
We have tried to make the packaging easy to  
EN 12  
 
 
separate into three materials: cardboard (box),  
polystyrene foam (buffer) and polyethylene  
(bags, protective foam sheet.)  
Your system consists of materials which can  
be recycled and reused if disassembled by  
a specialized company. Please observe the  
local regulations regarding the disposal of  
packaging materials, exhausted batteries and old  
equipment.  
“Made for iPod” and “Made for iPhone”  
mean that an electronic accessory has been  
designed to connect specifically to iPod or  
iPhone respectively, and has been certified by  
the developer to meet Apple performance  
standards.Apple is not responsible for the  
operation of this device or its compliance with  
safety and regulatory standards. Please note that  
the use of this accessory with iPod or iPhone  
may affect wireless performance.  
iPod and iPhone are trademarks of Apple Inc.,  
registered in the U.S. and other countries.  
Note  
The type plate is located on the bottom of the  
apparatus.  
13 EN  
 
Specifications are subject to change without notice  
2014 ©WOOX Innovations Limited.  
All rights reserved.  
Philips and the Philips’ Shield Emblem are registered  
trademarks of Koninklijke Philips N.V. and are used byWOOX  
Innovations Limited under license from Koninklijke Philips N.V.  
AJ6200D_AJ6200DB_98_UM_V3.0  
 

Peavey Music Mixer 2443 3243 User Manual
Pelco Home Security System C2406M F User Manual
Pengo Computer Accessories Car Stereo System 06201 User Manual
Philips Bottle Warmer SCF260 37 User Manual
Philips Headphones SHE9551 User Manual
Philips Home Theater System HSB2351 51 User Manual
Philips MP3 Docking Station DS9000 User Manual
Philips Switch CBTD3306 User Manual
Philips TV Antenna 21PT5107 User Manual
Philips Webcam CT9A9KBRN User Manual