Peavey DJ Equipment DJS 1800 User Manual

Portable  
DJ System  
SPECIFICATIONS  
Enclosure:  
1800 System  
Frequency Response:  
Low Frequency Limit (-3  
point):  
40 Hz  
Low Frequency Limit  
point):  
35 Hz  
Power Handling:  
350 watts continuous (37.4 volts RMS)  
600 watts program  
Sound Pressure Level 1 Watt at 1  
Meter Swept Sine Input in  
Environment:  
98  
Maximum Sound Pressure Level:  
121  
Radiation Angle Measured at -6  
Point of Polar Response:  
96”  
92”  
Horizontal:  
Vertical:  
k-5  
Enclosure Materials and Finish:  
MDF cabinet, braced internally,  
covered with durable black carpet, and  
reinforced with high impact polymer  
corners  
Crossover Frequency:  
DJS 1800 Sub: 200 Hz  
DJS 1800: 1200 Hz  
73”  
74”  
Horizontal:  
Vertical:  
5 k-16  
Horizontal:  
Vertical:  
97”  
46”  
Crossover Type:  
Internal Passive  
Mounting:  
DJS 1800 Sub: Internal mounting block,  
guide pole, and stand adaptor plate  
DJS 1800: Bottom-mounted  
adaptor, DJS 1800 pole stand  
Directivity Factor, (Mean):  
6.87; -4.6  
Electrical Crossover Slope:  
Subwoofer: 12  
octave high output)  
Satellite: 12  
low pass (6  
stand  
Directivity Index Di (Mean):  
8.37 -3  
for satellite internal  
and low pass  
Dimensions:  
DJS 1800 Sub:  
Transducer Complement:  
DJS 1800 Sub:  
Impedance (Nominal):  
4 ohms  
22.5” W x 30.5” H x 25.75” D  
(57.2 cm W x 77.5 cm H x 65.4 cm D)  
4 ohm  
woofer with  
DJS 1800:  
Black  
impregnated cone.  
Impedance (Minimum):  
titanium compression  
H x  
4 ohm 15435  
Peavey 22XT  
driver loaded onto a CH-3  
Input Connections:  
DJS 1800 Sub: One  
female full range  
V horn and a  
input and one  
output  
female high pass  
Sheffield@ midwoofer.  
DJS 1800: Two  
inputs in parallel, one  
low input and one  
input  
female full range  
female biamp  
female biamp high  
Box Tuning Frequency (Fbox):  
DJS 1800 Sub: 55 Hz  
DJS 1800 Closed Box (fc): 80 Hz  
 
DJS 1800:  
Fig. 1  
Frequency  
20.25” W x 27.375” H x 15.25” D  
(51.4 cm W x 69.5 cm H x 38.7 cm D)  
DJS 1800 Pole Stand:  
100  
90  
H x  
diameter  
(131.6 cm H x 3.8 cm diameter)  
80  
Net Weight:  
DJS 1800 Sub: 83.4 Ibs. (37.9 kg)  
DJS 1800: 64.3 Ibs. (29.2 kg)  
50 Hz  
100 Hz  
200 Hz  
500 Hz  
1
5
10  
20  
DJS 1800 Pole Stand: 3 Ibs. (1.4 kg)  
Shipping Weight:  
DJS 1800 Sub: 93.9 Ibs. (42.7 kg)  
Impedance  
Fig. 2  
DJS 1800: 72.2 Ibs. (32.8 kg)  
100 ohm  
31.5 ohm  
10 ohm  
DJS  
Pole Stand: 4 Ibs.  
kg)  
Additional Remarks:  
The 1800 Sub, DJS 1800, and DJS  
3.15 ohm  
1800 pole stand make up the DJS 1800  
System. To prevent the risk of damage and  
injury, do not use the DJS 1800 pole stand to  
support any product or system weighing in  
excess of 65 pounds. Maximum system  
height shall not exceed 80 inches.  
50 Hz  
20  
100 Hz  
200 Hz  
500 Hz  
5
Fig.  
3
20  
100  
I
I
I
I
I
I
I
I
FEATURES  
DJS 1800 System:  
l
Mobile two piece,  
Compact design for ease of transpor-  
tation  
Sheffield 15435 4 ohm  
titanium diaphragm compres-  
sion driver  
DJ system  
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
l
l
l
4 ohm Black  
subwoofer  
with Kevlar impregnated cone  
CH-3 constant directivity horn  
Advanced passive crossover employs  
premium polypropylene capacitors  
Full range, biamp, and processor  
capability  
Heavy-duty black carpet covering  
Custom fitted chrome plated pole  
stand  
l
l
l
l
l
Di  
125  
200  
315  
500  
800  
1. 25  
2
3. 15  
5
8
12.  
5
l
l
stand adaptor  
100  
160  
250  
4 0 0  
630  
4K  
three-dimensional,  
perforated metal grilles  
Fig.  
4
l
l
High quality  
jacks  
320  
350 watts continuous/600 watts  
program power  
Recessed handles  
l
160  
DESCRIPTION  
A new addition to the increasingly  
popular Peavey DJ sound reinforce-  
ment line is the DJS  
System. This  
two-piece, three-way DJ sound rein-  
forcement system is ideal for mobile DJ  
or club use. This system is made up of  
a two-way DJS 1800 satellite enclosure  
and the thunderous DJS 1800 Sub. The  
DJS 1800 features a 4 ohm  
80  
40  
15435 woofer in concert with  
the new  
titanium diaphragm  
compression driver and CH-3 horn. The  
passive crossover design makes a  
significant contribution to the DJS  
1800’s excellent performance in full  
125  
200  
315  
500  
800  
1. 25  
2
3. 15  
5
8
12.  
5
100  
160  
250  
400  
630  
4 K  
1 6 K  
0
Horizontal  
 
HORIZONTAL POLAR PATTERNS  
6
per division  
VERTICAL POLAR PATTERNS  
6
per division  
 
range. Biamp input jacks are also  
available for biamp applications. The  
specially voiced satellite speaker  
projects into the audience via the  
satellite support pole stand while the  
meter with an input of one watt. The  
nominal impedance shall be 4 ohms.  
The continuous power handling shall be  
350 watts, maximum program power of  
600 watts, with a minimum amplifier  
WARNING: TO PREVENT THE  
RISK OF DAMAGE AND IN-  
JURY, DO NOT USE THE  
POLE STAND TO  
DJS  
Sub “pumps up” the bass  
headroom of 3  
sions of the DJS  
22.5 inches wide by 30.5 inches high by  
25.75 inches deep. The weight shall be  
The outside dimen-  
Sub shall be  
SUPPORT ANY PRODUCT  
WEIGHING MORE THAN 65  
POUNDS. MAXIMUM SYSTEM  
HEIGHT MUST NOT EXCEED  
80 INCHES.  
volume with thundering low end. The  
DJS 1800 Sub is fitted with a special  
top mounted stand adaptor to facilitate  
system application. The satellite  
speaker support pole engages through  
the enclosure and seats in the base of  
the DJS 1800 Sub cabinet for truly  
stable operation.  
The DJS 1800 Sub is loaded with the  
18” 1801-4 Black  
for resounding bass response. This  
portable subwoofer is “built to take it,”  
boasting a  
83.4  
DJS  
The outside dimensions of the  
shall be 20.25 inches wide by  
27.375 inches high by 15.25 inches  
deep. The weight shall be 64.3 Ibs.  
ARCHITECTURAL  
ENGINEERING  
SPECIFICATIONS  
The loudspeaker system shall have  
an operating bandwidth of 40 Hz to  
ONE-YEAR  
LIMITED WARRANTY  
subwoofer  
NOTE: For details, refer to the war-  
ranty statement. Copies of this state-  
ment may be obtained by contacting  
Peavey Electronics Corporation, P.O.  
Box 2898, Meridian, Mississippi 39302-  
2898.  
17  
The output level shall be 98  
perforated metal  
when measured at a distance of one  
grille mounted to a high density multi-  
ply cabinet covered in heavy-duty black  
carpet. This system has a rated power  
handling of 350 watts continuous and  
600 watts of program power.  
Features and specifications subject to change without notice.  
Peavey Electronics Corporation 711 A Street Meridian, MS 39301 U.S.A. (601)  
Telex: 504115 Fax: 486-1278  
 
Printed in U.S.A.  

Perlick Freezer F24N User Manual
Philips Breast Pump SCF155 06 User Manual
Philips Camera Accessories R03 P4 User Manual
Philips Digital Camera SPC502NC User Manual
Philips Espresso Maker SIN 006XN User Manual
Philips TV Cables SWV6366 User Manual
Philips Video Game Sound System HTS3532 User Manual
Polaris Heat Pump TBM 200 LH User Manual
Poulan Trimmer 530164253 User Manual
ProForm Treadmill PMTL493050 User Manual