POSIFLEX Business Machines Door KP 300 User Manual

KP-300 / KP-300T  
SIDE MOUNT  
PROGRAMMABLE KEYPAD  
USER’S MANUAL  
Rev.: B0  
FCC Notes:  
This equipment generates, uses, and can radiate radio frequency energy and, if not  
installed and used in accordance with the instructions manual, may cause interference  
to radio communications. It has been tested and found to comply with limits for a Class  
A digital device pursuant to subpart J of Part 15 of FCC Rules, which are designed to  
provide reasonable protection against interference when operated in a commercial  
environment. Operation of this equipment in a residential area is likely to cause  
interference in which case the user at his own expense will be required to take whatever  
measures to correct the interference.  
Warranty Limits:  
Warranty terminates automatically when any person other than the authorized  
technicians opens the machine. The user should consult his/her dealer for the problem  
happened. Warranty voids if the user does not follow the instructions in application of  
this merchandise. The manufacturer is by no means responsible for any damage or  
hazard caused by improper application.  
About This Manual:  
Posiflex Technologies, Inc. has made every effort for the accuracy of the content in this  
manual. However, Posiflex Technologies, Inc. will assume no liability for any technical  
inaccuracies or editorial or other errors or omissions contained herein, nor for direct,  
indirect, incidental, consequential or otherwise damages, including without limitation  
loss of data or profits, resulting from furnishing, performance, or use of this material.  
This information is provided “as is” and Posiflex Technologies, Inc. expressly  
disclaims any warranties, expressed, implied or statutory, including without limitation  
implied warranties of merchantability or fitness for particular purpose, good title and  
against infringement.  
The information in this manual contains only essential hardware concerns for general  
user and is subject to change without notice. Posiflex reserves the right to alter product  
designs, layouts or drivers without notification. The system integrator shall provide  
applicative notices and arrangement for special options utilizing this product. The user  
may find the most up to date information of the hardware from web sites:  
All data should be backed-up prior to the installation of any drive unit or storage  
peripheral. Posiflex Technologies, Inc. will not be responsible for any loss of data  
resulting from the use, disuse or misuse of this or any other Posiflex product.  
All rights are strictly reserved. No part of this documentation may be reproduced,  
stored in a retrieval system, or transmitted in any form or by any means, electronic,  
mechanical, photocopying, or otherwise, without prior express written consent from  
Posiflex Inc. the publisher of this documentation.  
© Copyright Posiflex Technologies, Inc. 2008  
All brand and product names and trademarks are the property of their respective holders.  
Part 1  
P/N: 19830900030  
 
INSTALLATION GUIDE  
UNPACKING CONTENTS  
Items packed in for  
The side mount programmable keypad itself  
Posiflex product information CD  
Transparent key caps for single key  
Key clip  
Qt’y  
1
1
20  
1
Control keys (4 pcs / set)  
1
Legend sheets (4 sh. / set)  
1
This manual  
1
Note: Utility drivers for KP-300 / KP-300T can be found in the CD or DVD  
packaged or please find for latest updates by visiting driver download  
MECHANICAL FIXATION  
For the KP-300 / KP-300T to be  
installed in the KS series host system, the  
upgrade kit is installed to the right edge of  
the LCD panel. You may find two screw  
holes on back of the right side of the main  
unit of KS series as circled in the right  
picture. Remove these 2 screws to remove  
the cover for side mount upgrade kit as arrowed in same picture. Take out the  
cable inside this cover as circled in lower right picture and then connect it to  
connector inside the side mount upgrade kit KP-  
300 / KP-300T as arrowed in same picture.  
Gently arrange the excessive  
length of this cable back in the  
hole and use the 2 original  
screws to fit KP-300 / KP-300T  
back to the position originally occupied by the cover as in the  
left picture. Please reserve the cover if there is chance to have  
the side mount kit removed in the future.  
KEYTOP LAYOUT  
Keytop Replacement  
The keypad in KP-300 / KP-300T is organized into 2 parts: a 4 by 4  
numerical keypad area and a 4 by 6 matrix minus a 2 by 2 square recess  
programmable keypad area. However, this keypad allows some layout  
Part 3  
 
alterations by the system integrator. Besides the standard single key installed,  
there are double keys and blank keys for purchase to provide more convenient  
user interface.  
When replacement of keytop is required, it is advisable to use a  
flattop (minus sign) screw driver (Do not use the attached key clip for this  
operation.) to help getting the key top off gently. Please always first orientate  
the key tops as below before inserting any keytop into the case of the keypad.  
Failure to do so could result in permanent damage not covered in product  
warranty. Please always match the latching tab on bottom stem of keytop with  
the tab in guiding hole and gently press the key top down till a click sound is  
heard as indicated in the pictures below.  
Single key top  
Double key top  
Tab in the  
guide hole  
Latching tab  
Labeling On Keytop  
The programmable keypad is provided with an easy and durable  
method for reminding the user of content programmed in each programmable  
key. First preprint (or write) in each cell of the attached colored legend sheet  
the “name” for each key. Stick each cell to the corresponding keytop and then  
put on the transparent key cap from the accessories. In this way, the labeling  
will be protected and resistant to scratch or rubbing.  
When re-labeling is required, please use the attached key clip to hook  
up the transparent key cap and change the label then re-cap.  
KEYPAD PROGRAMMING  
The programming of the keys above the numerical keypad in KP-300  
/ KP-300T is in general the task of the system integrator and not the average  
end user. For end user, please go to the chapter of “OPERATION GUIDE” of  
this manual directly.  
Utility Installation  
In the Posiflex Product Information CD attached with KP-300 / KP-  
300T, there is a subfolder named as “\Drivers\KP” or please download from  
programming utility for KP-300 / KP-300T.  
In the above mentioned subfolder please find a further subfolder  
“uKBW_xxx” with “xxx” representing any number of the utility revision. This  
Part 4  
 
is a Windows utility for the USB interface KP-300 / KP-300T. Execute  
“uKBW_xxx\SETUP.EXE” to install the programming utility “uKBW.EXE”  
for various editions of Windows OS. After completion of the “Setup”, there  
will be a program group “Posiflex Tools” in the program files. Clicking the  
program “Posiflex USB Programmable Keyboard” in this group will activate  
the uKBW.EXE for KP-300 / KP-300T. Please select the right model when  
entering the program if questioned by the program.  
Keypad Programming  
A normal keyboard may be required for inputting data in keypad  
programming. In the command menu of the programming utility, “Keyboard”  
=> “Read” or “Write” can be used to transfer the current content in KP-300 /  
KP-300T to the program memory or vice versa. “File” => “Open” or “Save”  
can be used to edit an existing template file or preserved the current program  
content to a template file. “View” command alters the key map page  
corresponding to the position of control key. The rightmost column in key map  
for Page 1 refers to the answer back codes for the control key.  
Right click (or left click to select a key and followed by a “Return”  
key of normal keyboard) in the key map starts editing the selected key. Select  
another key or press “Down Arrow” of normal keyboard finishes programming  
of that key. Remember to “Keyboard” => “Write” or “File” => “Save” before  
exiting the program otherwise everything worked will be lost.  
Quick Reference Guide for Programming a Key  
Please refer to our web site for every detail in programming the  
programmable keyboards or keypads. The following simplified guide severs as  
a concise tool for instant application.  
Keys To Program  
How to Program Them  
Esc, Enter, Tab, Back Space, Caps  
Lock, Menu, Window, F1 - F12,  
Shift, Ctrl, Alt, Arrow Keys and  
All Functions like: Print Scrn,  
Scroll Lock, Pause, Insert, Delete,  
Home, End, Page Up, Page Down  
Right click in the key editing area  
and select the desired key from the  
menu/submenu appeared  
A - Z, 0 - 9, ~ ` ! @ # $ % ^ & * ( ) Press: “Desired Key or Keys” of the  
- _ = + } { [ ] | \ ’ ; ” : /. , < > ? normal keyboard  
Part 5  
 
Hardware Limitation in Programming  
In case of “multiple combination key” application which means  
pressing three or more keys at the same time to obtain certain data output from  
the keypad, there could be some limitations inherent from the nature of keypad  
structure. The CPU of keypad detects the contact between the “horizontal” and  
“vertical” lines for each key press, recognizes which key is pressed and sends  
correspondent data to the host computer. When there are many keys pressed at  
the same time, and the pattern of the contacts coincides with some special  
relationship, there are chances that the CPU of keyboard be confused about  
exactly which keys are pressed. The user may change the locations of the key-  
definition to prevent this once such confusion happens.  
MSR CONFIGURATION  
Please find the subfolder “\Drivers\KP\USBMSR_xxx” in the  
Posiflex Product Information CD or DVD or download from our web as  
mentioned earlier and execute the “SETUP.EXE” to install the USB MSR  
manager under Windows OS. The USB MSR manager can control parameters  
like individual track enable/disable, Alt+Num emulation and Start/end sentinel  
substitute.  
SMART CARD READER DRIVER INSTALLATION  
Please find the subfolder “\Drivers\KP\SC200” in the Posiflex  
Product Information CD or DVD or download from our web as mentioned  
earlier. Execute the “SETUP.EXE” to install the driver into the Windows OS.  
The reader is PC/SC 1.0 compliant. The reader is also EMV level 1 compliant.  
The smart card reader is also supported by Microsoft CCID generic class  
driver.  
Part 6  
 
OPERATION GUIDE  
KEYPAD LAYOUT  
6
7
1
2
4
5
3
8
Front Right Side View  
Front View  
1. 6 position lock switch for electronic control key  
2. Multi-page programmable keys  
3. Numerical keypad  
4. MSR mark  
5. MSR slot  
6. Smart card reader slot  
7. Smart card reader mark  
8. Example smart card to be read  
PROGRAMMABLE KEYPAD  
Electronic Control Key  
On top right corner of KP-300 / KP-300T, there is an electronic  
control key that can be turned to one of the following 6 positions: LP, L0, L1,  
L2, L3 and L4. It can only be taken out from the switch at positions L0 and L1.  
The purpose of this electronic key serves 3 folds: When the key is switched to  
(and extracted from) position L0, the keypad output (excluding the optional  
MSR and the optional smart card reader) will be blocked off by hardware to  
work as a security measure. A programmable answer back code for the final  
position of the 6 position electronic key will be sent by the keypad to the host  
computer whenever the key is switched to a new position for a programmable  
delay time or when the host computer sends a specific code (E7h) to inquire  
the keypad. The position of the electronic key determines which page of the  
key content table for the 20 push keys applies, while the definitions of the  
same key within different pages can be programmed so absolutely independent  
to provide instant menu change over.  
This electronic key switch is delivered with a set of 4 pcs of keys,  
Part 7  
 
each marked as “PRG”, “REG”, “Z” and “GT”. The effective range of each of  
the 4 keys can be illustrated by the following table and drawing.  
PRG REG  
Z
N
Y
Y
Y
Y
N
GT  
N
Y
Y
Y
LP  
L0  
L1  
L2  
L3  
L4  
Y
Y
Y
Y
Y
N
N
Y
Y
Y
N
N
Y
Y
Programmable Keys  
The multi-page programmable keys can deliver to the host system the  
string of keyboard input as programmed. Please note that when the 6 position  
electronic control key is turned to a different position, the content of same key  
could be completely different. It is also possible to use combination keys if  
programmed to. There will be no output of these keys if the control key is  
turned to “L0” position.  
Numerical Keypad  
The numerical keypad is durably pre-marked. When the 6 position  
electronic control key is turned to a different position, the content of same key  
remains unless it has been programmed in a particular way. The numerical  
keypad is not applicable in combination keys. There will be no output of these  
keys if the control key is turned to “L0” position.  
MAGNETIC STRIPE READER (OPTION)  
For magnetic stripe card reading, be sure to insert the card to the  
bottom with magnetic stripe facing the mark aside the slot. The movement of  
the card can be either inserting the card from the top surface then sliding the  
card down out of the slot, or sliding the card upward from the lower side of the  
slot till it reaches the top end as long as the card is a standard one. A non-  
standard card recorded without complete degaussing prior to recovery may  
accept only one direction in card reading.  
The magnetic stripe reader in KP-300 / KP-300T connects to the host  
through USB port as an USB KB and therefore requires no driver installation  
to get it working.  
SMART CARD READER (OPTION)  
Card Insertion  
For smart card reading, please insert the end of the smart chip first  
and have the chip facing upward and toward the mark aside the side slot of  
KP-300 as in the example picture in front right side view.  
Part 8  
 
Applicable Smart Card Type  
The smart card reader can be used for both asynchronous and  
synchronous type smart cards. For asynchronous type smart card, it reads the  
card with T = 0 and T = 1 protocols up to 340 Kbps of EMV and ISO modes.  
For synchronous type smart card, coverage includes: 2-wire (SLE4432/42), 3-  
wire (SLE4418/28) etc., SDA/I2C, 4403, 4433, 4404, 896  
SOUND PORTS (OPTION FOR KP-300 ONLY)  
The audio port in KS system is arranged to have an internal audio  
speaker with maximum audio power of 2 W at lower left corner of the main  
unit but no direct access port in the main unit. The  
external access to audio ports can be found in the side  
mount option kit KP-300 with a Microphone in and a  
stereo line out jacks at its bottom surface as circled in  
the right picture. The internal speaker will be  
automatically disconnected when a plug is inserted in  
the line output jack.  
Part 9  
 
T31454  
警告使用者  
這是甲類的資訊產品,在居住的環  
境中使用時,可能會造成射頻干  
擾,在這種情況下,使用者會被要  
求採取某些適當的對策。  
Part 10  
 

Philips Baby Accessories SCF609 01 User Manual
Philips Clock AJ110 User Manual
Philips Computer Monitor BDL3215E User Manual
Philips Cordless Telephone CD5354S User Manual
Philips CRT Television TA 7216 User Manual
Philips Flat Panel Television VOIP021 User Manual
Philips Home Security System VCM8120 01T User Manual
Philips Work Light Reflector Lamp User Manual
Pioneer DVD Player DVH 390MP User Manual
Presto Fryer electric Stainless Steel Skillet User Manual